The first one I failed with 775 but i used ONLY MS book and a few demo that i have found in internet.

Friday 3/7/98 I got 931 (not bad!).

This time i used:

MS book :-(

 Que book (very good, but with some wrong answers)

 Trans exam

 and.... BRAINDUMP, BRAINDUMP, BRAINDUMP.... :-)

 Almost all the questions I had, I have read on braindump.

1. 3 cities connected with 2 T1 lines. Required result: connect at 1Mbs. Optional: connected also if 1 link fail <--only req.

 2. 3 cities with 3 RAS server, each server with 8 modem of 28.8 Kbs. Req: connection at 1MBS. <--- NO req.

 3. If you copy from Ethernet to Token Ring a file it takes 30 seconds. From TR to Eth 5 minuts. Why? <--Different packets lenght.

 4. Ethernet client. Software initialize, but you can't see the network resources. <---Transceiver wrong.

 5. Netware client. Software initialize, but you can't see the network resources. <---Wrong frame type.

 6. A computer with Windows95 must communicate with another one that runs Novell netware Dos Requester. What protocol on W95? <--- Netbeui ??? (I think)

 7. If you install a Lan adapter card with IRQ 3 you can have a conflict with what? <--- com2.

 8. You have a network with Windows95, windows nt, Mac, Dos, with protocols: IPX/SPX, NetBeui, AppleTalk and 4 brouters . You have to much broadcast storm. How can you resolve the problem with minimum cost? <--- use only IPX/SPX and AppleTalk, and turn off the bridging on brouters.

 9. How can i mesure the bandwidth of a new cat. 5 UTP just installed? <--- Protocol analyzer.

 10. After Holidays, you can't connect to the network. <--- lose the physical connection.

 11. What Wan protocol of Data link layer, support compression? <--- PPP.

 12. After installation of a Lan Adapter card, your computer with SCSI disks doesn't reboot. <--- IRQ conflict.

 Antonio