This dump is in German AND English

 

Subject: A new Braindump and PLEASE STAY TUNED !!!

Hallo Robert,

hier ist ein neuer Braindump f�r 70-058 Networking Essentials.

BITTE GIB DEINE SEITE NICHT AUF !!! ICH HABE NOCH NICHT ALLE EXAMEN

BESTANDEN !!! Falls Du zeitliche Probleme hast, dann l��t sich vielleicht

da �ber ein bischen Arbeitsteilung reden... . Auf jeden Fall sollte diese

Seite nicht untergehen, das w�re echt zu schade. Daf�r ist sie viel zu

hilfreich.

Viele liebe Gr��e und tausend Dank f�r Deine tolle Seite.

Georg-Stefan

Ab hier geht es los....

 

Hy Folks,

I passed the NetEss-Exam with 913 Points end July 1998. I think this is not

so bad for only learning for just 14 days. And thanks to you ALL and

especially Robert I was able to reach such a high result. I only used the

MCSE Networking Essentials Study Guide from Sybex AND of course this

baindump-Side !!! I realy can confirm that almost every question that is

asked in the exam you can find here on this site. But be careful !!! There

are MANY answeres who are NOT correct !!

Therefore I won't give you any answers right here, only the questions. You

will find almost every answer in the Sybex-book. Read it carefully too. If

you have some problems or questions, don't hesitate to e-mail me:

[email protected]

Oh, yes, I still have some information:

1. questions on modems I see here a lot rubbish:

Please NEVER use this STUPID formula for the modem-Question !!!

The CORRECT formula ist just: number of modems * modemspeed (in bps) !!!

2. Windows NT, Server or Workstation are NOT able to do Share-Level !!

 

So on to the questions:

1. What kind of protocol do you use for assured delivery ?

A: connection oriented

B: connection less

2. What connectivity device functions at the network-layer ?

A: router

B: gateway

C: hub

D: repeater

3. Explain Client /Server ... don't remember anymore...

 

4. What is NDIS and ODI used for ?

A: Offers a

 

5. Where do you need to be careful in not providing two equal NETBIOS names ?

Choose all that apply.

A: workgroup name

B: computer name

C: domain name

D: share name

6. Which of the following examines packets

A: TDR

B: protocol analyser

C: SNMP

D: performance monitor

7. Which of the following supports compression and error control ?

A: SLIP

B: PPP

C: DLC

D: LAT

8. Which is a feature of 100BaseT

A: Fibre Optic

B: T-connector

C: 50(-Restistance

D: UTP Cat. 5

9. You have 5 WAN-Networks using TCP/IP, NWLink,NetBEUI. Which of the

following Data-Link-protocoll do you use ?

A: SLIP

B: PPP

C: DLC

10. What type of server do you have if it provides specific applications

for a client computer ?

A: File storage and Print server

B: application server

11. What is the higher protocol for NetBIOS ?

A: DLC

B: SMB

C: OSI

D: XNS

E: TCP/IP

12. How can you divide an IP-Adress into Networkadress and Hostadress ?

A: WINS

B: DHCP

C: Subnet mask

D: MAC

13. Which is a feature of 10BaseT

A: Coax

B: STP

C: RG-58 A/U

D: UPT

14. Which adress makes an Network Interface Card unique ?

A: Ip-Number

B: MAC-Adress

C: IRQ

D: Type of tranceiver

15. Which of the following OS support share-level-security ?

A: Windows for Workgroups

B: Windows 95

C: Windows NT Workstation

D: Windows NT Server

16. What are the advantages of NDIS and ODI ?

A:

 

17. You want to connect a Client-Computer to an IBM 3090 running a

terminal-emulation-programm on the client but you don't want to change the

protocol. What do use ?

A: Repeater

B: Router

C: Gateway

D: Hub

18. You have a Network running TCP/IP . What do you use to segment the

network ?

A: Repeater

B: Router

C: Gateway

D: Switch

19. You have two seperate Ethernet-networks you want to connect together.

They use NetBEUI and NWLink. What device do you use ?

A: Router

B: Bridge

C: Gateway

D: Hub

20. Which WAN can provide bandwith on demand ?

A: X.25

B: Frame Relay

C: ATM

D: FDDI

21. You want to connect several Windows95 computer together with several

MS-DOS computer that are using a Netware DOS Requester. What protocol do

you use ?

A: NetBEUI

B: TCP/IP

C: NWLink

D: DLC

22. You have a Network using TCP/IP. You want to reduce traffic on the

network. What do you use ?

A: Router

B: Bridge

C: Gateway

D: Hub

23. Which WAN can run at more than 100Mbit/s ?

A: X.25

B: ATM

C: Frame Relay

D: FDDI

24. You have 3 NT-Servers and 75 clients using NetBEUI. You want to

connect your clients to an UNIX Station that is using NFS. But you don't

want to change protocol. What do you use ?

A: Router

B: Bridge

C: Gateway

D: Hub

25. You have a small company that is moving for only 6 month in another

building. There are no network cables in the building. You want to connect

7 computers together. What kind of topology do you use ?

A: MESH

B: BUS

C: RING

D: STAR

26. What kind of Medium do you use for 100Mbit/s ?

A: RG-58 A/U

B: FDDI

C: UTP Cat. 5

D: UTP Cat. 3

27. You want to install a backbone between two buildings that reside 1000

m from each other. What kind of medium do you use ?

A: UTP Cat 5.

B: Fibre optic

C: radio transmission

D: RG-62

28. You want to connect an Ethernet-network with a Token-Ring-network with

fibre optic cable. What device do you use to have flow control, broadcast

management and several communication paths ?

A: Router

B: Brouter

C: Gateway

D: Switch

29. You want to install an 100Mbit/s Ethernet-network. Above your ceiling

having about 1m of free space. You need to minimise costs. What medium do

you use ?

A: Coax

B: STP

C: UTP Cat. 5

D: Fibre optic

30. You want to install an Peer-to-peer network running Windows 95. What

kind of protocol do you use ?

A: TCP/IP

B: NWLink

C: DLC

D: XNS

31. Which WAN gives you the most reliable connection ?

A: X.25

B: ATM

C: Frame Relay

D: ISDN

32. You have an network running NetBEUI. You change your protocol to

TCP/IP. You can ping your server only by ist IP-Number but not by ist

NetBIOS name. What is wrong ?

A: Your client is not declared in the WINS-server

B: The server is not declared in the WINS-Server

C: You must change protocol

D: You must change the frame type

33. You have two network interface cards with the following

implementation. MAC-Adress: 020303427, IRQ 5, Adress 300. When you install

both network cards your network does not function. What is wrong ?

A: MAC adress may not be the same.

B: IRQ may not bee the the same

C: The Base adress may not be the same

34. Suzies computer has no connection to the network anymore. The other

clients are working well. What is wrong?

A: The cable between the server and the network broke.

B: The cable of Suzies computer is loose.

C: Suzies computer needs more RAM

D: The frame type is incorrect

35. Peters computer has no connection to the network. The driver does not

initalise correctly. The other clients are workling well. What can you do ?

A: Check the cable between the server and the network with a TDR.

B: Check the cable of Peters computer with a TDR.

C: Check the NIC with a diagnose program.

36. If you want to copy a file from an Ethernet-network to a

Token-Ring-network it takes 30 seconds. If you want to copy a file from a

Token-Ring-network to an Ethernet-network to it takes 2 minutes. Why ?

A: The frame size of the Ethernet is larger

B: The frame size of the Token-Ring is larger

C: The Ethernet is quicker.

D: The Token Ring network uses another protocol

37. You have the following Exhibit:

x x Terminator

0 0 Computer / Server

| + Ground

|

x0------0---------------------------0----------0x+

The network does not work correctly. What must you correct ?

A: Change the network so you only have two terminators

B: Change all terminators to 25( and ground at each terminator

C: Change cable to RG-58/U

D: Run another protocol

 

38. You have an network running NWLink. You connect a new computer on the

network. The NIC installs properly but you cannot access the network. What

is wrong ?

A: Wrong IRQ

B: Wrong protocol

C: Wrong frame type

D: Wrong MAC adress

39. You have 300 client computers that are connected over a WAN with a

56kbit/s link to a database-server. The users reclaim slow access to the

database-server. The databas-server is already optimized. What can you do ?

A: Add more RAM to the server an the clients.

B: Change the 56kbit/s link to T1.

C: Change networkcards to 32 bit

The rest I don't remember anymore, sorry.

I wish all future NetEssers good luck !

Georg-Stefan