Max time = 105 mins Number of questions = 58 Min. score = 793
Just pass the N.Essential (1st trial) this morning dated OCT.9th.98 with score 931. Time taken = 54 mins 25 sec
I wish to thank all the contributors who submit their valuble dumps to this amazing site.
and special thank the peoples who maintain them.
This site is really cover a lot rather just study your test book.Now I wish to do some feed back today for your reference & to whom intend to take 70-58 exam later.
The following is my result :
Section Analysis Percent Correct
1. Standards and Terminology.........................................................................100%
2. Planning ..........................................................................93%
3. Implementation ..........................................................................84%
4. Troubleshooting ..........................................................................93%Please apply with font 8 & Netscape Communicator.
The answers may not be 100% correct , just double comfirm the answers I choosed during the test.
I marked X with my answers.1. Situation : -
Your company’s rapid growth ahs caused an increase in the number of computers on your network. There
Were 300 computers at the beginnin gof the year, and there are 100 now. Broadcast storms are occuring with
Increasing frequency on the network. You want to reduce the number of broadcast storms. The following table
Summarize you current network configuration.
Servers 25 with NT Server
Client computer 600 Win95 & 300 Macintosh that use system 7.x
Unix computer 75
Network type 10 BaseT
Cable Cat 3 UTP
Brouter 4, with bridging enable
Required result.
. You must reduce the number of broadcast storms at least 50% which minimizing changes for the client computers.Optional result.
. Minimize hardware costs need to produce in reducing in broadcast storms.
. Minimize outgoing administration works after the changes are made.
. allow for continue expansion of the network.Proposal solution.
. Turn off bridging on all of the brouters . Configure all of the computer & brouters to use obly Nwlink IPX.a) Produce the required result & all of the option
b) Require result & 1 of the optional
c) require but does not produce any of the optional result
X d) does not produce require result2. You install a client computer to a network which use Nwlink IPX. The client computer is not able to access any network
resources. After investigation, you decide that hardware is not cousing the problem .What is the problem?
a) incorrect subnetmask b) incorrect IP address on the client computer
X c) incorrect frame type d) corrupter win.ini file on the client computer3. Configuration of 2 of the client computer on your 10 BaseT Ethernet network
Mac 10C80000000 IRQ 5
I/O port 300 Transceiver Rj45
DMA none Memory address none
Which changes you make on both Ethernet network adapters to allow the 2 client computer to access the network?
X a) Change Mac (hardware) address to factury settings
b) Change IRQ to 3 c) change I/O port to 320 d) change transceiver type to BNC4. Corrent network configuration Server 27 NT server
Client compute r 750
Protocols Netbeui , Nwlink IPX , TcpIP
You install a nic, which used Nwlink IPX. You are NOT able to access some of the shared resources from this new
client computer All of the other client computer on the network able to all shared network resources. What is the problem?
a) The subnetmask setting in the new client computer is incorrect
X b) The protocol missmatch between the new client computer & inaccesseble shared network resources.
c) The Netbios name of the new client computer & the inaccesssible shared network resources and duplicate.
d) There is a cable failure between the new client computer & the inaccessible shared network resources.This one I ‘m not sure if the answer is either b or c. so , just picked b during the test. Pls find out yourself.
5. A client comupter on your Ethernet network is NOT able to access the server. Initialize of the client computer’s network
software was fine. All of the client comuptersa are able to access the sources. After investigation, you decide the hardware
is not causing the problem.
a) there is insufficient extenal memory in the client computer.
b) the nic in the server is confugured to use the wrong transceiver.
X c) The nic in the client comupter is configured to use wrong transceiver.
d) An excessive number of collisions is occuring on the nodes.6. Your network include NT server , client comupters MS DOS, Unix. You add a new server that runs MS NT server. All
of the MS DOS comupters are access all shared network resources. The Unix comupters are access all shared network
resources except the new server.
a) faulty nic in the Unix computer b) incorrect binding order of theserver
X c) protocol missmatch between server & Unix client computer d) incorrect frame type on the server7) Question regarding RG 58 /U join with RG 58 A/U . Randomly out of communication. Current network is
All cable………..infinity ohms Both terminators ……………50ohms All transceiver………infinity ohms
What must you do to repair the network.
a) replace 50 ohms with 25 ohms terminators.
X b) replace all RG 58 /U coaxial cable with RG 58 A/U
c ) replace all cable with RG 62 /U coaxial cable.
d) replace all T connectors with new one.8. % processor time = 8 Page Fault / sec = 2 % Disk time = 25
a) replace the srver with a multi processor computer. b) install more RAM
X c) stripe set with parity d) segment the network by addin nic to server9) You have 55 client computers to go 10 BaseT Ethernet network . Users of network report network respone is slow during peak
hour of usage server.
a) replace all Ethernet adapters with FDDI adapters X b) replace all Ether concentrator with Ethernet Switch
c) replace all with 100 Mbps ATM equavalents d) replace all with 16 Mbps Token Ring equavalents.10) Client computer exhibitted. TR=50 OHMS ***** = RG 58 A/U ^^^^^GROUND T = T CONNECTOR
TR ************ T ******************** T ************TR
^^^^^^ client computer serverRG 58 A /U cable = 0 ohms Both T connectors = infinity Both terminators = 50 ohms
a) replace the 50 ohms terminators with 25 ohms terminator.
b) replace the 50 ohms terminators with 75 ohms terminators.
c) replace all T connectors X d) install component RG 58 A/U coaxial cable.11) Network is running Nwlink IPX. Initialising of your computer , network software is fine. But you client comupter is not
able to access the server. All others computers are able to access the server.
a) incorrect nicderiver installed b ) pc is insufficient external memory c ) the nic with incorrect I/O port address
X d) incorrect frame type.12 ) 1 question with broadcast storm problem.
9 NT server, 200 client computers, 10 BaseT Ethernet , NetBEUI, no Bridge, no Router.
X d) replace NetBEUI with TCP/IP & segment network with router.Sorry , my time is running out just to copy my answer during the test. 30 mins left to submit answer.
13) Which driver to identify defection network adapter?
X a) Protocol Analyzer b ) Volt meter c) Optical TDR d) Time Domain ReflectorQuestion 14 & 15 were senerio - blue screen of death - . could not copy long sentences.and answers. Short of time . sorry.
16) Which type of server provide processing power to use programme for client computer.
a) file & print server X b) application server17) Characteristic of IEEE 802.3 10 Base T Ethernet?
a) RJ 11 X b) UTP cable c) BNC T-connector d) 50 ohms terminator18) Which datalink communications protocol provide connection with computer via dial-up telephone line.
Choose all that apply X a) Slip X b) PPP19) The devices function at abouve Transport layer of the OSI. IT acts as translator between 2 dissimilar protocols.
Diagram shown an OSI layer.
X a) gateway b ) bridge c) Router d) repeater20) What is the purpose of NDIS ?
X a) Allow any compliant transport protocol to work with any compliant network adaptor.just copy the long answer I choosed.
21 ) 10 client computers Win95…. What is the access control?
a) User & group access control to each share resources X b) supply a password t o each shared resources.22 ) Question regards an UNC name. Choose 2 to apply.
X a) share name b) domain name X c ) computer name d) workgroup name23) NT server , 750 client computers . Protocols NetBEUI , Nwlink IPX, TCP/IP. You install a new client computer
which use IPX. YOU are NOT able to access some of the shared resources form the new computer. All of the other
computers on the network are able to access all shared network resources , what is the problem?
a) Subnet mask on new client comupter is incorrect.
X b) Protocols missmatch between new client computer and inaccessible shared network resources.
c) Netbios name for the new client computer & for the inaccessible shared resources are duplicated.
d) There is a cable failure between new client computer & the inaccessible shared resources .note : this question is as same as question 4 don’t know if b or c is correct . find out by youself. Sorry.
24 ) 10 client computer with Win NT workstation. Which kind of access control and control access to file and directries
on the network? Choose all that apply.
X a) User & group access control to each shared resources b) Supply passwork for each shared resources.25) NT server on network, client computer Win95. You want to monitor network activity and evalute network communication
at the packet level.
X a) Performance Monitor b) Protocol Analizer c) Oscilloscope d) Volt meterI choosed b) at first but there is only Performance Monitor on NT server and no Protocol Analizer !
Finally I changed b) back to a). was it correct ? pls find out by yourselt .Oppsss, time out !
Well, no more time left to copy more questions and answers . I had to submit the test within 2 mins.The following topics that I try to recall my memory to write them down for you reference.
1. Questions about where and when to install Router , Bridge and Gateway.
2. 2 senario questions. 2 TI line connect with 3 Cities. Looking for redundancy.
3 TI line connect with 3 Cities. Looking for redundancy.3. 2 senario questions about Netbios name sheme . = apply only 15 hexadecimal to identify server , locaiton, department…etc.
= apply with 8 characters to resolve server ..department name.
5 characters to resolve location code
2 digits code between servers and departments
correspond to email of computer user.4. 2 senario about hardware down time , virus scan , file and directores protection , guessing password break…..etc.
a) propose solution : 1. UPS 2. Access Control Security 3. Disk Mirroring 4. Tape backup and store off site.
5. virus scanning 6. Auditing enableb) propose solution : 1. NTFS user level 2. Access Control Security 3. Change pass word 40 days
4. Stripe set with parity 5. Tape backup and store off site.
That is all I can remember and I could not find any Modem fomula and Wireless topics during the test.
Please refer to other braindumps to compare the above questions and answers.I'm on my way to boom NT w/s after 14 days from now.
By the way, if you had a digital watch with count-down function, bring along with you
to alert the time left of your exam.Thank you. good night to all of you.
keith malaysia 11.oct.98 1:42am