Date sent: Mon, 28 Jul 1997 14:56:01 -0500
Subject: MCSE 90 plus ?'s on NE, braindumps collection

 

Hi, I have rpinted out a bunch of brain dumps and got tired of going over the same stuff over and over.
I went through about 10 and this is a list of questions which coul be of assistance to you in your pursuit of the 70-058 test.
I left the answers off so that you will have to look up the answers yourself and understand them. Good Luck.

 

Study Questions for Networking Essentials 70-058

 

Gathered from Braindumps and WEB study guides. By all means not a complete listing. I hope it helps. The first few have answers, you do the rest.

1. Twisted Pair Cat5 - running 180m what would you need? Repeater

2. Segmented Lans, How do you create them? Routers, Bridges

3. Which protocols are routable/not routable?

4. What do you use for Peer to Peer? no Netbeui, then IPX/XPS

5. Reading of 0 ohms on thinnet cable,Tconn, and terminator. Whats wrong?

6. Finding the available bandwidth?

7. Several "What device would you use to test _____?

8. Useing the TDR, you get readings XYZ. Ehat does it mean?

9. What do ODI and NDIS allow you to do?

10. Which supports compression and error control? PPP , not CSLIP

11. Bridge, What OSI level?

12. Router, What OSI level?

13. Gateway, What OSI level(s)?

14. What diagnostic device examines packets?

15. Diffrence between share level and user level security/access?

16. Which can support 100Mbps?

17. Which is a feature of WinNT 4.0 WS? User level passwords

18. Which is a feature of Win95 WS? Share level passwords for resources

19. If upgrading to 100BaseTX, What else needs to be upgraded?

20. What IRQ's are used by what devices?

21. What is the terminator resistance for Thinnet? 50 ohm

22. What does an Application Server do?

23. What does a File/Print Server do?

24. Can you mix RG 58 A with RG 58 A/U in a 10Base2 network between terminals?

25. You have a 5 user Peer to Peer WFW network. Waht protocol do you use?

26. Which switching service would allow a WAN link of 100Mpbs?

27. Define what a Protocol Analyzer?

28. Define what a TDR does?

29. Define what a Packet analyzing tool do?

30. Define ATM.

31. Define Frame relay technology.

32. Define Gateway

33. Define Routers

34. Define Interconnectivity between Netware, Apple, and NT

35. Define the IPX frame size

36. Define the TCP window size

37. Know what a mesh technology network looks like. How do you check the cables?

38. Where does SMB reside?

39. Where does DLC reside?

40. Read page 176 in MS book

41. What does a multiplexer do?

42. Understand Ethernet Switches

43. what speed cna X.25 and Frame Relay Support?

44. What is a PAD?

45. Understand the Raid levels? How many are there?

46. How many characters are in a NetBIOS name? What are not allowed?

47. What kind of errors can a multimeter find?

48. What kind of errors can a Protocol Analyzer find?

49. What kind of errors can a Time Domain Reflectometer find?

50. What kind of errors can an Oscilliscope find?

51. What should you look at if using an IPX/SPX protocol and the WS is not seen?

52. What protocol is used to determine the number of hops to a destination?

53. What are the diffrences between 10base2 and 10base-T?

54. What cable type is 802.3 refering to?

55. What protocols are not routable?

56. Which protocols are routable?

57. How does the OSI model pertain to hardware?

58. What can ATM and FDDI be used for?

59. Which can be used for at least 100Mbps?

60. What is Packet switching used for?

61. When and what do T1 lines used for?

62. How long can the cables be for the following: 10baset, 10base2, 10base5, etc.?

63. What are the following cables used for: RG8,RG11, RG58, RG62?

64. What are the bandwidths of the following network services: ATM, X.25, ISDN, Frame Relay, etc.?

65. Can you wire tap a FDDI line?

66. What are the following Acronyms: DHCP, WINS, NFS?

67. What kind of errors can a Sniffer find?

68. What would you use to resolve broadcast storms?

69. What RAID levels does NT support?

70. What is Hot-fixing or Sector sparing?

71. What is Jitter?

72. How does Crosstalk happen?

73. Who uses CSMA/CA?

74. What is a spanning tree Algorythm used for?

75. Is Decnet routable?

76. What What is the name of the "number sequence" you need for IP adresses?

77. You can ping a server by it's IP but not by its name, whats wrong?

78. You have a 4Mbps Tokenring connected to an Ethernet, A 5MB file takes 30 sec going from TR to Ether. It takes 2 min going from Ether to Token Ring

Why? (nightmare question)

79. Where is it important NOT to have equal Netbios names?

80. What is the UNC, and what is it for?

81. Using Performance Monitor, What can you do with it specifically?

82. What can transfer Video, Audio, and Data?

83. What happens if you try to mix Frame types on an Ethernet?

84. What are the I/O base memory and Base memory settings on a NIC for?

85. Does PPP or SLIP provide compression and error protection?

86. What is the difference between Broadband and Baseband?

87. What is the access point?

88. What is the 5-4-3 rule?

89. What kind of security is provided by RAID 0?

90. What is a transciever and where would you find one?

91. Can you connect Thicknet to Thinnet with a transceiver?

92. If your CPU is at 100% usage , what should you do?

93. What is CSMA/CD?

94. How is a runt created?

95. What is a Jam and when is it created?

96. What is a heart beat and what should you do about?

97. What is an AUI / DIX used for?

 

My fingers hurt and I hope these help.

Sam S.