server computers. Which tool must you use?

a. netstat.exe

b. nbtstat.exe

c. Performance Monitor

*d. Network Moitor

of data that is being transmitted and the total number of connections that are in use. Which

tool must you use?

a. netstat.exe

b. nbtstat.exe

c. Performance Monitor

*d. Network Moitor

You want to retrieve network statistics from the Unix computer. Which install on

workstation? (Choose two)

a. Simple TCP/IP services

*b. Network monitor agent

*c. SNMP services

d. Performance Monitor

e. Thirty-party network management software

server computer. Which network service must you install before you can do this?

a. Network Moitor agent

b. Rip for Internet Protocol

c. SAP agent

d. Simple TCP/IP services

*e. SNMP services

[5-6] Situation Questions

Three servers, 40 NTW, Single network. Router connect to the network to an ISP. All

computers on your network are DHCP, WINS and DNS clients. WINS and DNS servers are

DHCP scope option. RAS - two modems.

Required : Remote client must able to connect to shared resources on all computers on the

company network. RAS must support two current remote clients.

Optional : You want all data that is transferred across the dial-up connection to be encrypted. RAS must support two cuncurrent remote clients.

up networking clients. Enable multilink on RAS server. Install PPTP on the RAS server and

on the dial up networking clients.

a. Required + two optional

b. Required + one optional

c. Required only

d. Does not met Required

Proposed Solution : Configure RAS to use DHCP to assign remote clients address. Configure

Dial-up networking client s to use a server assigned IP address. Disable the Guest account on

the RAS server.

a. Required + two optional

b. Required + one optional

c. Required only

d. Does not met Required

10.151.98.222

127.24.12.11

172.25.256.71

192.109.254.112

194.16.71.61

225.17.64.201

computer on subnet B by running the command net use f:\\factory.bytecomp.com\data. When

other computers on subnet A can that command and connect server. Wksta1 can ping the

server by IP address.

*a. There's no entry for factory.bytecomp.com on the DNS server.

b. Wksta1 is not configured with an IP address for a DNS server.

c. Wksta1 is not configured with an IP address for a WINS server.

d. Wksta1 is not configured to use DNS for netbios name resolution.

used to resolve DNS queres for resources that are located on the internet. How to

configure?

a. as a primary name server

b. as a sencondary name server

c. as a forwarder for the exiting DNS server

d. as a forwarder for a WIS server

assigned the same IP address each time that server is started. What information should you

supply? (Choose two)

a. IP address

b. subnnet mask

c. hardwaare address

d. lease period

want to specify the IP address of your company's two DNS server on each client computer

regardless of which subnet the client computer is located on. How to configure DHCP ?

a. global option

b. local option

c. scope option

d. client option

a. the computer name of the DHCP server

b. the IP address of DHCP server

c. the IP address of a different DHCP relay agent on a remote subnet

d. the IP address of the router to forward DHCP request to.

You also want to export the statistics for use in a spread sheet.

a. netstat.exe

b. nbtstat.exe

c. Performance Monitor

d. Network Moitor

14. On a windows NT server configured as DNS, you want to add a resource record that

identifies the mail server for your domain.

----> MX

configure the DHCP server to assign the IP address of the WINS server to all clients

computer. What else do to use wins?

a. On each client computer, specify the IP address of at least one DNS server.

b. On each client computer, specify the IP address of PDC.

c. Specify a netbios scope IP.

d. Specify the netbios name resolution node type.

a. arp

b. ping

c. nbtstat

d. Network Monotor

TCP/IP

70-059

Just took tcp/ip, DAMN....the test is ADAPTIVE!yes beaware of the test, it`s 570 to pass, i scored

542....missed it by one.Some of the questions has changed, they had question from dumps, but

1.) i had a god damn simulation about attaching the 6 are 4 items???can`t remember the question,

it was a drag and drop.

------------ ----------- ====== ======

| hosts | | lmhost |

| file | file | 1 2

| | | |

------------- ----------- ====== ======

computer

------------- ----------- ====== ======

| wins? | | dns?? |

| | | | 3 4

------------- ----------- ====== ======

(please refer this braindump to CHILIPEPER)

specifying the server's UNC path in windows nt explorer. However, when she tries to connect

via ftp 199.34.23.100 .she cannot connect.

-- the windows nt workstion computer is denied access to the FTP server's directories.

on his TCP/IP network

Required result:

The server must rout TCP/IP packets

Optional desired results:

1) the server should dynamically updtae it routing tables when other router are added to or removed from the network.

2)the server should provide IP addresses to every client computer on each subnet

3)the server should send trap messages across the network to a UNIX server

Proposed solution:

1).install win server

2). install dhcp serever create on scope for each subnet

--- FIRST ANSWER is the proposed solution does not produce the required result

4)which program would you use to execute a program remotely on a UNIX computer

----- Telent

Caching-Only Server

1.PPTP

2.USE MSCHAP

WINS and ENABLE THE DNS FOR WINS RESOLUTION.

adequate #PRE and #DOM - entries in their LMHOSTS - files.

MX

The workstation is configured with an invalid subnet mask.

TELNET

1.IP ADDRESS OF DHCP RELAY

2.?????

Date: Beginning of September

Passed today with : 963

187.123.23.45 develop

you can ping 187.123.34.19 , but you cannot connect \\product\netapps

- p-node resolution.(answer is last option)

10.11.12.14 server

10.11.12.15 UNIX developer #Developers FTP server

10.11.12.20 developer # developer

you try to ftp developer,you can connect. But you try ftp 10.11.12.20

you fial to connect

-- ip address of assigned to the FTP server is not 10.11.12.20 (answer B )

3 Kevin uses a nt workstation on TCP/IP network,running the command ftp 144.123.23.34 ,

he connect to nt server. when he use UNC path in windows nt explorer, he cannot connect

---the server is not set up to use a win server. ( do not,do not, do not select the

workstaion is not set up to use DNS server).

4 on her windows nt workstation computer, jackie can connect to a remote nt server by

specifying the server's UNC path in windows nt explorer. However, when she tries to connect

via ftp 199.34.23.100 .she cannot connect.

-- the windows nt workstion computer is denied access to the FTP server's directories.

5 try to remember answer --total 4 scenario

FIRST QUESTION--Kevin want to install a Windows NT server with four NIC card on his TCP/IP network

Required result:

The server must rout TCP/IP packets

Optional desired results:

1) the server should dynamically update it routing tables when other router are added to or removed from the network.

2)the server should provide IP addresses to every client computer on each subnet

3)the server should send trap messages across the network to a UNIX server

Proposed solution:

1).install win server

2). install dhcp serever create on scope for each subnet

--- FIRST ANSWER is the proposed solution does not produce the required result

Second question same above proposed solution

1)enable IP forwarding on the server

2). install win server

---- SECOND ANSWER IS "meet requirement but not the optionals"

third question same above

proposed solution

1) enable IP forwarding on server

2) enable RIP to IP

3). install the DHCP server on th server. create on scope for each subnet

-----THIRD ANSWER IS"MEET REQUIREMENTS AND ONLY 2 OPTIONALS.

FORTH QUESTION

PROPOSED SOLUTION

1)ENABLE IP FORWARDING

2) enable RIP to IP

3) install the DHCP server.......

4).install SNMP service on thr server. set up SNMP to forward trap messages to the

UNIX server

------ FORTH ANSWER IS" meet requirement and all optionals

6. similar question DON'T TRY TO REMEMBER ANSWER

two scenario

four nt server, 100 windows 95 11 UNIX computers, 80 windows nt workstions ....... one of the windows NT server computer run DHCP with one scope configured for each subnet

required results:

1) every windows-based computer on each subnet must be able to access the nt server

2) every windows-based computer on each subnet must also be able to receive its ip addresses from DHCP server

optional desired results:

1) all UNIX systems should access by access hostmane any NT server that is set up as an FTP server

2) all windows-based computers should access by hostname any UNIX computer that is set up as Telent or FTP server

proposed solution

1)set up the network routers to forward DHCP broadcasts to all subnets

2)install a wins server on the network

3) set up the DHCP server to supply all DHCP clients with the ip address of the wins server.

4) on the DHCP server, exclude the ip addresses of the UNIX computers from the scopes

---the proposed solution produces the required results and none of the optional desiered results

proposed solution

same above then add

5)on the wins server configure ststic mapping for each UNIX computer (on the real test is on the wins server configure host name for each UNIX computer)

-------the proposed solution produces the required results and only one of the optionsl desired results.

7. one similar scenario question

require result

Seattle replicate to Dallas....

optional result

seattle replicate to dallas every 1000 update

dallas replicate to seattle every 24 hours

proposed solution

---------------------------------------------------

push partner pull partner

---------------------------------------------------

seattle dallas

---------------------------------------------------

dallas seattle

----------------------------------------------------

above table showing seattle's push partner is dallas

dallas's pull partner is seattle

----the proposed solution does not produce the required result( I am not

sure, answer is right or not. chek by yourself)

8.A diagram with two subnet computers. the subnet on the left has a server called container and A pc called WKST1 and the subnet on the right has one server called Market. Wkst1 can connect Market, but wkst1 can not connect Container serve on the same subnet

---the default gateway of Container is wrong

9.big diagram showing about four NT server looking like routers, I cannot remember all thing but point key is "ROUTE ADD destiona address MASK local subnet mask default gateway"

I only remeber two subnet mask 255.255.255.224(or 240) on the HOST2 & HOST3

255.255.255.192 on the HOST1

DIAGRAM LIKE BELOW

HOST1 ROUTE HOST2 ROUTE HOST3 ROUTE HOST4

------ answer A and C are not right. Therefore pay attention answer B and D.

I select answer B (I am not sure right ) They ask on the Host2 and Host 3 static routing table to HOST1 AND LEFT SIDE OF HOST2 ( SORRY I cannot remember exact question)

10. a lot of test from http://209.207.167.177/70-59/study1.htm ( TCP/IP NT SERVER 4.0 studyguide (2.8.98) MUST MUST MUST remember eveything.( netstat,network monitor, caching-only server, secondary DNS server, forwarder for existing DNS servers,LPR, LPQ,performance monitor,nbtstat, tracert, route and netstat, ipconfig/all,ARP,TCP/IP printing service)

--- two answer enble IP forwarding

assigne each IP address different subnet address.

---- implement LMHOSTS on all workstaions (because small network,don't choice implement WINS)

----136.169.16.214 finance #pre #dom:Corp ( check answer again)

---- two answer one entry for the PDC in each remote doman

one entry for each doman controller in the local doman.

bits subnet # of subnet class A class B class C

mask

2 192 2 4194302 16382 62

3 224 6 2097150 8190 30

4 240 14 1048574 4094 14

5 248 30 524286 2046 6

6 252 62 262142 1022 2

7 254 126 131070 510 ---

8 255 254 65534 254 ----

my test never ask class A questions, just try to remember class b and c

16.which program would you use to execute a program remotely on a UNIX computer

----- Telent

---- UNIX install SNMP management software

NT server install SNMP services.

above some of answer may be not right, but questions 100% right

Braindump for TCP/IP

Date: 14th August 1998

Passed today with 913. Got five wrong, not quite sure which one. Overall my test was not so bad,

1. A diagram with two subnets. Computer WKT1 and Market server in Subnet One and Server Design in Subnet two. WKT1 can access Design but cannot access Market.

My answer: invalid subnet mask n WKT1. ( two of choices were about default gateway and router, so you are left with two to choose from )

123.45.66.7 Engineering Product #………

125.55.66.77 Product #…….

I chose The IP for Product is incorrect.

7. I forgot another question but the answer is ( pick two ) one is one in PDC of the remote domain and one the domain controller in the local domain.

8. The big scenario question on requiring all windows based machine to connect and UNIX to …..and trap messages ( fairly well covered in other braindumps ) followed by four proposed solutions with each one getting better and better until the last one being meet required and all optionals. Basically you need enable IP forwarding, RIP for dynamic routing table updates, static mapping for UNIX, SNMP for trap messages etc.

9. A lot of questions refering to You can connect local machine but cannot remote machines whilst others in your subnet is doing fine. Mostly something not right with your machine; e.g. invalid subnet mask or default gateway settings.

12. Montoring from a UNIX machine . What do you need. I chose on UNIX install SNMP management software and NT server install SNMP Services.

*********************************************************************

1)How a third DNS Server to function as a Backup server in an environment where there are already two DNS Servers acting as Primary and Secondary?

Caching-Only Server

2) How can you configure the third DNS Sever which is to be configured for supporting the load balancing of Primary Server and should not participate in Zone Trasfer Traffics?

Caching-Only Server

B-NODE or INVALID SUBNET MASK

BY IMPLEMENTING ONE DHCP SCOPE FOR EACH SUBNET AND SPECIFYING THE LEASE PERIOD AS PART OF EACH SCOPE'S CONFIGURATION.

PPTP

7)You want the Unix member workstations to print jobs at the NT print server connected print device. How will you configure?

INSTALL TCP/IP PRITING SERVICE AND SHARE THE PRINTER.

How will you configure the printer on the server, if the server will manager the printer?

INSTALL TCP/IP PRITING SERVICE, CONFIGURE A LPR PORT FOR THE PRINTER AND SHARE THE PRINTER.

At the client only connect to the printer.

CNAME

10)You want to monitor the NT Workstation performance from a Unix client. How will you do it? What Software (utility?) at NT Workstation and at Unix host?

SMNP MANAGEMENT SOFTWARE ON THE UNIX AND SMNP SERVICE

ON THE NT SERVER.

11) You don't want to have trap messagees from unauthorized SNMP Hosts. How will you configure the SNMP agent workstation?

"Community Name" and "Only Accept SNMP packages from these Hosts".

12)When you ftp a host name using UNC you get a "Bad IP address" message. What could be the possible reason? HOSTS FILE.

13)You can ping the remote host using the IP address but not through netuse \\....\... Why? WINS or LMHOSTS.

14)You are not able to ping the IP address of a remote host on another subnet using Netbios name but through IP address.You can also ping the other hosts on that subnet using both ways.What went wrong? CLIENT NOT USING WINS SERVER.

15)You want a Workstation in Subnet A to browse and Communicate with the other workstation in subnet B. But you can't even though they have their own WINS Servers installed.What will you do? WINS REPLICATION.

16)You have Subnet A, Subnet B and Subnet C. The Workstations in the subnet A&B uses the WINS in the Subnet A. The Workstations in Subnet C uses its own. How will you configure to have the users of Subnet C and B to browse themselves freely?

WINS REPLICATION.

17)You don't want to resolve host names into IP address using a DNS which contains static entries in it. What will you install in alliance with DNS to resolve IP address from a dynamically updated DNS database?

WINS and ENABLE THE DNS FOR WINS RESOLUTION.

INVALID FTP SERVER'S IP.... You have to know how the HOSTS file works.....

#PRE #DOM

21)How to configure a RAS - server that directly accesses the internet and uses PPTP. Clients access the RAS server via an ISP that is accessed with a modem.

PPTP filter

Its DG was 200.64.64.1

With this SM the host is in a different subnet than it's DG.

one for each subnet

one for each host

one for each host' s NIC

one for each router' s interface

one for each WAN - link

IP - address of UNIX-hosts, that the traps have to be sent to

adequate #PRE and #DOM - entries in their LMHOSTS - files.

client is neither WINS-enabled nor does he have an entry of your computer in its LMHOSTS - file.

29) UNIX - hosts must be made able to use wins for name resolution. DNS is already installed.

Use WINS resolution in DNS. (Be careful: They asked for WINS reverse lookup in this context, which is wrong)

30) A client broadcasts to much to connect to other clients on the same subnet.

wrong subnet mask

31) There are two subnets, each having a WINS-server. How do you configure the WINS-servers.

replication

32) What do you install on a UNIX workstation to monitor a NT server?

UNIX-SNMP management app, NT-SNMP(worded funny)

33) What do you install on a NT server with an attached device to allow a UNIX machine to print to it? TCP/IP printing service

34) What do you use to send a text-based job to a NT server? lpr

h-mode

snmp management ip address and community group

cache.dns

MX

The IP address of the DHCP server.

42) Using Windows NT Explorer, a Windows NT Workstation computer cannot connect to a Windows NT Server computer installed on a different subnet. All other computer can connect to this server. When you run Network Monitor, you noticed that each time the workstation attempts to connect to the sever, the workstation broadcast an ARP request for the server's IP address. What is the most likely cause of the problem?

The workstation is configured with an invalid subnet mask.

43) Working at your Windows NT computer, you want to use Performance Monitor to collect statistic from all TCP/IP traffic on the Windows NT server computers on your network. What should you do?

Install the SNMP service on each server.

One for each network interface; One for each network adapter that is installed on each host.

Create a client reservation for each server.

By using the CACHE file that was installed by default on the DNS server.

47) IF you have 5 subnets and you want to implement Wins how many Wins servers do you need? One

UTILITYS

49) What is the utility to view what configuration changes the DHCP made at your workstation Configuration? IPCONFIG /ALL

50) What is the utility to purge the contents of the arp cache? ARP -d

51) What is the utility to monitor the Ethernet traffic and the TCP/IP stasticts?

NETSTAT -e -s

52) Which utility will you use to export the statstics collected to a spread sheat for future analsis? PERFORMANCE MONITOR

53) What utility will you use to construct a capacity planning on all statistical datas you collected? PERFORMANCE MONITOR

54)What utility for seeing the IP address-to- MAC- address resolution? ARP

55)You want to send the print jobs to a UNIX workstation from the windows based machines.Which utility will you use? LPR

56)You want to view the print jobs that are sent to UNIX printer from a windows based Workstation.Which utility will you use? LPQ

57) What do you use to find the path a packet takes? tracert

58) What do you use to monitor TCP/IP stats since the last reboot? netstat

59) What do you use to monitor TCP/IP stats(choose two)?

netstat, perf mon(it didn't list network mon)

60) What do you use to capture and examine Ethernet frames? network monitor

61) What do you use to capture TCP/IP packets, log them and export to a spreadsheet?

perf mon

62) What to use if session suddenly stops responding – netstat

63) What to use to monitor ethernet & tcpip stats – netstat & network mon

64) What to use to view tcpip stats that are cumulative from the last time you started the comp – netstat

65) What to use to gather stats and export to a spreadsheet to analyze – Perf mon

66) What needed to capture and analyze frames, then send to a file – Ntwk mon

67) To see IP to MAC address resolution ARP -a / -g

68) To Add Static entry to ARP ARP -s

69) To view changes made to DHCP IPCONFIG /All

70) To redirect the print job to the net printer form UNIX or Windows LPR

71) To View a Print job From UNIX to NTprinter(Win)or From NT (win) to UNIX printer LPQ

72) To Clear the NetBios cache NBTSTAT -R (Case sens switch)

73) To show the Netbios cache NBTSTAT -c

74)To find the computer with duplicate IP address. NBTSTAT -n

75) To view list of allTCP/IP connections NETSTAT

76) The summery of IP & Ethernet Statistics NETSTAT & NET Monitor

77) To see the routing tabel on server NETSTAT-r & ROUTE

78) To clear all route ROUTE -f

79) To trouble shoot DNS problems Host name resolution problems NSLOOK UP

80) TO identify Path and time taken by Packet Through the routers TRACERT

81) To copy files from UNIX Server ftp

82)To access and run App on remote UNIX Telnet

83) To use NDIS 4.0 to capture frames from network datastreem,filtering. NET Monitor.

SCENARIOS

1) Network with 100 workstations and 20 UNIX computers. UNIX computers never move,each Unix-hostname consists of no more than 15 characters, TCP/IP is protocol used. DHCP configured with one scope for each subnet. All Windows based computers are set up as DHCP clients.

Required results:

1) Every Windows based computer on each subnet must be able to access the Windows NT Server computers by computer name.

2) Every Windows based computer on each subnet must also be able to receive its IP address from the DHCP server.

Optional:

1)All UNIX systems should access by hostname any Windows NT Server computer that is set up as an FTP server.

2) All Windows based computers should access by hostname any UNIX computer that is set up as an TELNET or FTP server.

Scenario 1:

Proposed solution:

1) Set up network routers and forward DHCP broadcasts to all subnets

2) Install Wins server on the network

3) Install DNS server and configure it for name resolution

4) something else that is meaningless for the problem

Scenario 2:

Proposed solution:

1) Set up network routers and forward DHCP broadcasts to all subnets

2) Install Wins server on the network

3) Install DNS server and configure it for name resolution

4) Set up DHCP server to supply all DHCP clients with the IP address of both the WINS sever and the DNS server.

5) something else that does not meet the problem

Proposed Solution:

Like Scenario 1, additional

2) On the WINS server, make static mapping entries for UNIX computers.

3) On the DHCP server, exclude the UNIX computers' IP addresses from the

Scenario 3

Proposed solution:

1) Set up network routers and forward DHCP broadcasts to all subnets

2) Install Wins server on the network

3) Install DNS server and configure it for name resolution

4) Set up DHCP server to supply all DHCP clients with the IP address of both the WINS sever and the DNS server.

5) On the DHCP server, exclude the UNIX computers' IP addresses from the scope.

6) On the WINS server, make static mapping entries for UNIX computers

-----------------------------------------------------------------------------------------------

There are several subnets, each having its own DHCP-Server. Required result: Each client receives its unique IP-address automatically

Optional result: DHCP - server must work even if one of them is down

a) Proposed solution:

Configure each DHCP-server to use the scope of another server as well

-> does not work; double IP-addresses possible

b) Proposed solution:

Install a DHCP-server that covers all the IP-scopes of all subnets

Do the same with all the other DHCP-servers

-> does not work, double IP-addresses possible

-----------------------------------------------------------------------------------------------

You have a domain spanning across three subnets.You want the clients in all the 3 subnets to be able to communicate and browse each other. How will you do that?

You install and configure an NT Server to be put in the middle of three subnets.

Required: It should be made to act as a router.

Optional: IP router and should be made to dynamically update its routing table whenever routers are added and removed from the network. That machine to be able to supply IP address to all the machines belonging to the three subnets. Also you want a NT Workstation to be sent a trap message across the network.

>Configure the Server to act as router.

>Enable IP Forwarding.

>Implement the DHCP Server on the NT Server.

>Configure RIP.

70-59 Implementing and Supporting TCP/IP in NT 4.0

1) How a third DNS Server to function as a Backup server in an environment where there are already two DNS Servers acting as Primary and Secondary? CACHING-ONLY SERVER

2) How can you configure the third DNS Sever which is to be configured for supporting the load balancing of Primary Server and should not participate in Zone Trasfer Traffics? CACHING-ONLY SERVER

3) What is the utility to view who are all currently having TCP/IP connection with your Workstation? NETSTAT

4) What is the utility to view what configuration changes the DHCP made at your workstation Configuration? IPCONFIG /ALL

5) What is the utility to purge the contents of the arp cache? ARP -d

6) What is the utility to monitor the Ethernet traffic and the TCP/IP statistics? NETSTAT -e -s

7) Which utility will you use to export the statstics collected to a spread sheat for future analsis? PERFORMANCE MONITOR

8) What utility will you use to construct a capacity planning on all statistical datas you collected? PERFORMANCE MONITOR

9) Three UNIX machines are to be stored in the WINS Database manually and what entry will you put at the WINS configuration panel? STATIC UNIQUE ENTRY

11) What utility for seeing the IP address-to- MAC- address resolution? ARP

12)You have three subnets in which a single subnet is populated with 10 Laptop workstations and the other two subnets with NT Workstations. You want the 1st subnet to be supplied with IP addresses(of course by DHCP) with a lease acqusition period of 10 days.The other two subnets with 30 & 40 days lease period respectively. How will you configure?

BY IMPLEMENTING ONE DHCP SCOPE FOR EACH SUBNET AND SPECIFYING THE LEASE PERIOD AS PART OF EACH SCOPE'S CONFIGURATION.

13)Your NT Server in your office is connected via RAS connectivity to the Internet ISP Server through the ISDN communcation. Now you want the Windows 95 workstation users in your internel subnet to get connected to the ISP. How will you do that? PPTP

14)You want the Unix member workstations to print jobs at the NT print server connected print device. How will you configure? INSTALL TCP/IP PRITING SERVICE AND SHARE THE PRINTER.

15)You want the Windows based machines to print at a UNIX-Network printing device connected to a NT Print Server.

How will you redirect the jobs to the net printer? LPR

How will you configure the printer on the server, if the server will manager the printer? INSTALL TCP/IP PRITING SERVICE, CONFIGURE A LPR PORT FOR THE PRINTER AND SHARE THE PRINTER. At the client only connect to the printer.

16)You want to send the print jobs to a UNIX workstation from the windows based machines.Which utility will you use? LPR

17)You want to view the print jobs that are sent to UNIX printer from a windows based Workstation.Which utility will you use? LPQ

18)You are configuring a IIS server on NT Server a which is going to be used as a FTP Server and also a WWW Server. How will you configure it for the Host record? CNAME ..... MAIL SERVER? MX

19)You want to monitor the NT Workstation performance from a Unix client. How will you do it? What Software (utility?) at NT Workstation and at Unix host? SMNP MANAGEMENT SOFTWARE ON THE UNIX AND SMNP SERVICE ON THE NT SERVER.

20)You don't want to have trap messagees from unauthorized SNMP Hosts. How will you configure the SNMP agent workstation? "Community Name" and "Only Accept SNMP packages from these Hosts".

21)When you ftp a host name using UNC you get a "Bad IP address" message. What could be the possible reason? HOSTS FILE.

22)You can ping the remote host using the IP address but not through netuse \\....\... Why? WINS or LMHOSTS.

23)You are not able to ping the IP address of a remote host on another subnet using Netbios name but through IP address. You can also ping the other hosts on that subnet using both ways. What went wrong? CLIENT NOT USING WINS SERVER.

24)You have a domain spanning across three subnets.You want the clients in all the 3 subnets to be able to communicate and browse each other. How will you do that?

You install and configure an NT Server to be put in the middle of three subnets.

Required:

It should be made to act as a router.

Optional:

IP router and should be made to dynamically update its routing table whenever routers are added and removed from the network.

That machine to be able to supply IP address to all the machines belonging to the three subnets.

Also you want a NT Workstation to be sent a trap message across the network.

>Configure the Server to act as router.

>Enable IP Forwarding.

>Implement the DHCP Server on the NT Server.

>Configure RIP.

--------------------------------------------------------------------------------

26)You want a Workstation in Subnet A to browse and Communicate with the other workstation in subnet B. But you can't even though they have their own WINS Servers installed. What will you do? WINS REPLICATION.

27)You have Subnet A, Subnet B and Subnet C. The Workstations in the subnet A&B uses the WINS in the Subnet A. The Workstations in Subnet C uses its own. How will you configure to have the users of Subnet C and B to browse themselves freely? WINS REPLICATION.

29)You don't want to resolve host names into IP address using a DNS which contains static entries in it. What will you install in alliance with DNS to resolve IP address from a dynamically updated DNS database? WINS and ENABLE THE DNS FOR WINS RESOLUTION.

30) 157.21.36.121 UNIX Product

157.51.25.110 Product developer

Above is a Hosts file entry. When you say "ftp product" you get attached to the ftp server. But when you say "FTP 157.51.25.110" you can't reach it. Why? INVALID FTP SERVER'S IP.... You have to know how the HOSTS file works.....

32) Why a workstation is not making a broadcast even when it can't resolve through other methods? P-NODE

Subject: 70-059 TCP IP 4.0

1.) There were three scenario questions based on the same scenario:

Network with 100 workstations and 20 UNIX computers. UNIX computers never move, each Unix-hostname consists of no more than 15 characters, TCP/IP is protocol used. DHCP configured with one scope for each subnet. All Windows based computers are set up as DHCP clients.

Required results:

1) Every Windows based computer on each subnet must be able to access the Windows NT Server computers by computer name.

2) Every Windows based computer on each subnet must also be able to receive its IP address from the DHCP server.

Optional:

1) All UNIX systems should access by hostname any Windows NT Server computer that is set up as an FTP server.

2) All Windows based computers should access by hostname any UNIX computer that is set up as an TELNET or FTP server.

Scenario 1:

Proposed solution:

1) Set up network routers and forward DHCP broadcasts to all subnets

2) Install Wins server on the network

3) Install DNS server and configure it for name resolution

4) something else that is meaningless for the problem

Scenario 2:

Proposed solution:

1) Set up network routers and forward DHCP broadcasts to all subnets

2) Install Wins server on the network

3) Install DNS server and configure it for name resolution

4) Set up DHCP server to supply all DHCP clients with the IP address of both the WINS sever and the DNS server.

5) something else that does not meet the problem

Proposed Solution:

Like Scenario 1, additional

2) On the WINS server, make static mapping entries for UNIX computers.

3) On the DHCP server, exclude the UNIX computers' IP addresses from the

Scenario 3

Proposed solution:

1) Set up network routers and forward DHCP broadcasts to all subnets

2) Install Wins server on the network

3) Install DNS server and configure it for name resolution

4) Set up DHCP server to supply all DHCP clients with the IP address of both the WINS sever and the DNS server.

5) On the DHCP server, exclude the UNIX computers' IP addresses from the scope.

6) On the WINS server, make static mapping entries for UNIX computers

--------------------------------------------------------------------------------

2.) Following entries in a HOSTS-file:

192.168.5.7 UNIX developer #ftp server

192.170.8.15 developer #server

With 'ftp developer' you can connect to the ftp server but not with 'ftp192.168.8.15'. Why?

3.) Similar to question 2.)

192.168.5.7 UNIX developer # server

192.170.8.15 developer #ftp server

Able to connect with '192.168.8.15' but not with 'ftp-server'. Why?

5.) How to configure a RAS - server that directly accesses the internet and uses PPTP. Clients access the RAS server via an ISP that is accessed with a modem.

-> PPTP filter

6.) 'netstat' analyses cumulatively

7.) Collect data packets to analyse them with a spreadsheet application -> performance monitor

8.) Clear the NETBIOS - cache -> NBTSTAT -R

9.) Show the NETBIOS - Cache -> NBTSTAT -c

8.) & 9.) (You need not know the switches)

Remote clients cannot access a server in this net. You run IPCONFIG and read:

IP address 171.10.2.223

Default Gateway 171.10.2.1

subnet mask 255.255.0.0

NETBIOS node type h

NETBIOS scope-ID (i.e. none)

WINS Client enabled

DHCP Client (we forgot)

...

Why does this configuration not work?

routers left IP-address is 200.64.64.1, its right IP-address is 200.64.32.1.

Why can Client A not access client B? Its DG was 200.64.64.1

Class B net

host's IP : ...82.2

routers left IP-address is ...64.1, its right IP-address is ...32.1.

SM 255.255.240.0

Why can the host not access the server -> With this SM the host is in a different subnet than it's DG.

13.) DNS entry for a mail server -> MX

14.) Be aware of questions like: Which SM to use if you have 30 subnets and want to maximize the numbers of hosts per SM in a given net ID. Or the other way. You want to have a given # of hosts per subnet. Which SM would you use.

one for each subnet

one for each host

one for each host' s NIC

one for each router' s interface

one for each WAN - link

-------------------------------------------------------------------------------

16.) Two scenarios, where you want to enable a server to work as a router.

required result: routing must be possible

optional results: dynamical routing enabled

SNMP traps are to be sent to a SNMP - manager

16 a) Activate IP-forwarding

install PPTP

install DHCP

... (some services that are meaningless in this context)

-> produces just the required result

16 b) activate IP-forwarding

install RIP

install DHCP

... (some other services but not SNMP)

-> produces the required result and one optional

--------------------------------------------------------------------------------

17.) You want to audit a SNMP-Client by a UNIX host. What do you need. (choose two)

-> community name

-> IP - address of UNIX-hosts, that the traps have to be sent to

25.) There are two subnets, each having a WINS-server. How do you configure the WINS-servers.

-> replication <--

-> make the other WINS-server a secundary WINS server

-> make entries in the LMHOSTS - files

--------------------------------------------------------------------------------

26.) There are several subnets, each having its own DHCP-Server.

Required result: Each client receives its unique IP-address automatically

Optional result: DHCP - server must work even if one of them is down

26. a) Proposed solution:

Configure each DHCP-server to use the scope of another server as well

-> does not work; double IP-addresses possible

26. b) Proposed solution:

Install a DHCP-server that covers all the IP-scopes of all subnets. Do the same with all the other DHCP-servers

-> does not work, double IP-addresses possible

1.What is the utility to purge the contents of the NetBIOS name cache?

2. What is the utility to view who are all currently having TCP/IP Connection with your Workstation?

3. What is the utility to monitor the Ethernet traffic and the TCP/IP stasticts?

4. Which utility will you use to export the statistics collected to a spreadsheet for future analysis?

6. You want to send the print jobs to a UNIX workstation from the windows NT Workstations. Which utility will you use? LPR

7. You want to view the print jobs that are sent to UNIX printer from a windows based Workstation. Which utility will you use? LPQ

8. You are configuring a NT Server a which is going to be used as a Mail Server. What is Host record you will use?

9. You want to monitor the NT Workstation performance from a Unix client. How will you do it? What Software (utility?) at NT Workstation and at Unix host?

157.21.36.121 UNIX Product

157.51.25.110 Product developer