Hello friends ! here are 2 questions I did not see on the dumps.

I studied from the comdex study guide.

 

 

• NT server has 2 network adapters. Each of them is connected to TCP/IP network. There will be a diagram with IP as below and netmask  of 255.255.240.0

You want to enable IP forwarding. You want server to route between the two. Which IP which adapter?

There are 2 machines on top with IP 192.168.105.5  192.168.105.6

---

Adapter1

Adapter2

---

8.         The others below had192.168.82.8 and 192.168.82.9 IP and there were two adapters in the centre connecting them

 

 

 

• A company has networks in Boston and Hartfort. A worstation at boston with IP 172.19.62.20, subnet 255.255.255.0 and default gateway 172.19.62.1. You want t o access remote hosts on subnet in hardford. Settings PPP tcpip  shown in simulation.

 

Pix