70-067 - Implementing & supporting NT server 4.0

Just passed with a score of 800, pretty close. Would not have made it without help from this site. So here's my contribution to help others.

As usual the exam hit hard on ras and novel connectivity, there were also some trickey questions about administering an NT server from a Win 95 client running Admin Tools. Below are some questions that came up that I remember from other brain dumps. Do not take the answers as been correct, they are what I think to be correct, but I only scored with 800 so some may well be wrong, worth checking.

Good luck to all !

1. Does the Server service need to be stopped while the registry is backed up.

a. yes

b. no

(ans b)

2. Users are configured with man roaming profiles, the server which contains the profiles goes down, what will happen when the users try to log on

a. will not be able to log on

b. will be able to log on and will get the default user profile.

c. Some other answer

d. will log on but any changes made will be lost

(ans b)

3. You have a winnt server that runs IPX, and you have a netware client, what will the client be able to access

a. Directories

b. Client / Server Applications that run NetBIOS

c. Printers

d. Access no resources on the NT server.

(ans b)

4. How would you install windows 95 over a network, choose all that apply

a. share windows 95 installation files

b. make installation startup disk with network client administrator

c. make installation disk with network client administrator.

d. install using startup disk

e. install using disk set

(ans a,b,d)

5. You have a computer with 5 disks, each with 2 partitions, On the first disk is the boot and system partition, how will you optimize the pagefile.

a. place a pagefile on a disk other than the first disk

b. place a pagefile on each disk except the first

c. place a pagefile on the boot and system partition

d. place a pagefile on a partition other than the boot and system partition.

(ans b)

6. 10 workstations have been moved from the branch office to the headquaters to a domain named CENTRAL, you want the Branch office's worstations to become members of the CENTRAL domain

a. the domain administrator must use server manager to add the workstation in the domain. The workstation administrator must log on at each workstation to join the domain using the network applet

b. the domain administrator must log on at each workstation and create a computer account in the domain then join it.

c. the workstation administrator must log on at each workstation to create the computer account in the domain.

d. re-install windows NT.

(ans a)

7. You connect to a shared directory on a windows NT server, what special group are you automatically a member of,

a. Interactive

b. Network

c. System

d. Creator Owner

(ans - b)

8. You have a LAN with two Netware servers, 30 dos clients and 20 windows 3.x clients. IPX/SPX is the only protocol used. You are planning to add a windows NT server to the network so clients can use resources located on the new server. Which of the following do you need to install,

a. RIP IPX on the clients

b. NWlink and TCP/IP on the clients

c. NWlink on the NT server

d. GSNW on the NT server

(ans, I think b - better to check)

9. The server has a boot sector virus, how to you recover.

a. boot from a floppy and run SYS /MBR

b. run RDISK

c. run windows NT and select the recovery option

10. You have a mirror set with SCSI disks with the BIOS enabled and one of the disks fail. How do you set the ARC path on the boot disk to point to the mirror on the second disk.

there is an exhibit with this question which shows the system mirror on the second partition on the second disk

a. mutil 0 disk 0 rdisk 0 partition 0

b. mutil 0) disk 0 rdisk 0 partition 1

c. mutil 0 disk 1 rdisk 0 partition 0

d. mutil 0 disk 1 rdisk 0 partition 1

e. mutil 0 disk 1 rdisk 0 partition 2

f. multi 0 disk 0 rdisk 1 partition 2

(ans - f)

11. You have installed GSNW on the NT server, what else needs to be setup on the Netware server

a. NTGATEWAY account on NW

b. NTGATEWAY group on NW

(ans, b)

12. RAS server uses DHCP, what can DHCP also configure

a. Default Gateway

b. FTP

c. DNS

d. WINS

e. Mailserver

f. Subnet

(ans, a, c, f)

13. NT Server has 4 SCSI disks on one controller. User data is in different partition to system, you require fast access and must allow access to data in event of a disk failure, what config would you reccomend

a. Stripe set with parity

b. Mirror set

c. Stripset without parity

d. Duplex

(ans, b, i think)

at first i picked a 3 drive stripe set with partity then remebered that if the single boot drive failed you would not meet the requirement, the server would fail if the system partition failed, which only leaves mirror.

14. How do you create a new share on a remote server.

a. User manager

b. Disk Admin

c. Server manager

d. NT explorer

e Control panel

(ans c)

15. You have 5 NT servers, you want to audit TCP/IP from your windows NT workstation, what do you need

a. SNMP on each server

b. SNMP on your workstation

c. Control Panel

(ans a)

16. How do you find out the operating system and function of other computers in you web

a. server manageer

b. NT Diagnostics

c. Control Panel

d. NT Explorer

(ans a)

17. You have a HP netprinter which does not work, what is the most probable cause

a. Wrong driver

b. DLC not installed

c. You forgot to specify the port

d. The printer is already installed

(ans b)

18. A netware 3.x server is added to you NT domain consisting of 1NT server and 60 Win95 clients. Win95 clients use MS Client for windows . What do you need to do to enable the clients access to files and shared printers on the Netware server.

a. GSNW on the server, You need not configure your Win95 clients

b. Install NWLink and use the MS Client for Netware as the only client

c. CSNW

(ans a - I think)

19. Netware clients need to access NT server running client server app, what do you need

a. CSNW

b. GSNW

c. NWLink / IPX

d. RIP for NWLink / IPX

(ans - c)

20. You have a domain with PDC, BDC, member server, NT workstations and Win95 Client, the PDC works as an export server, which machines can recieve a copy of the replication

a. BDC configured for import

b.Member server configured for import

c. NT Workstation configured for import

d. Win 95 Clients configured for import

(ans a,b,c)

21. You install a printer on you NT 4.0 server, you want to use it as a network printer. In your network there are NT 4.0 and NT 3.51 clients, what drivers should you install.

a. a driver for each platform and NT version

b. only driver for 3.51

c. the driver for NT4.0 only

d. drivers will automatically work

(ans a)

22. How can you ensure that logon scripts match on PDC and BDC

a. just copy them to each server

b. replication of servers

c. synchronize the BDC with the PBC every time you change the logon scripts.

(ans b)

23. You want to allow only administrators to log on to the domain from a domain controller.

a. on your domain controller, refuse members of the group interactive to log on locally

b. remove all members except admins from the interactive group

c. allow only admins to log on locally

(ans c)

24. Remote users complain that they are disconnected when remote acessing the server, after enabling logging in the registy which file would you view,

a. Modem.log

b. Device.log

c. System.log

d. PPP.log

(ans d - check this one)

25. You install TCP/IP in a non-routed network, what else must you configure,

a. subnet mask

b. default gateway

c. WINS

d. DHCP

(ans a)

26. RAS server allows remote clients to dial in using NetBEUI and TCP/IP, what can remote clients access,

a. NetBIOS applications

b. Winsock applications

c. IPX/SPX applications

d. local resources on ras server

(ans a,b,d)

27. You are monitoring 5 servers from you NT workstation, you want to be notified when disk space on 5 servers is less than 25%, how to setup,

a. set up alert on each server

b. set up 5 alert counters for each server on your workstation

28. You want to migrate a Novell server to NT, what needs to be installed on the NT server,

a. FPNW

b. GSNW

c. RIP for IPX/SPX

d. NWLink protocol

(ans b)

29. Which can be configured for an export server

a. NT workstation

b. NT member server

c. Windows 95

d. Windows 3.1

e.NT domain contoller server

(ans b,e)

30. You have 2 netware servers and 100 netware clients, you want to add an NT server with SQL resources, you make the NT server a member of the netware domain, what next,

a. you create a local group on the member server, place the users in the global group then global into the local group

b. create a global group on the member server, place users into local group, then local into global,

c. create a local group on the domain, place users into global group, then global into local

d. none of the above, you only need NWLink

(ans d)

31. What do you use to administer a network shared printer from a Win 95 client running network admin tools

a. explorer

b. Control Panel

c. server manager

(ans c - check this one)