1. Your network is configured as a single domain that has three domain controllers and 25 NT Workstations. For security purposes you assign roaming user profiles to all user accounts in the domain. The profiles are mandatory. The server on which the profiles are stored fails. What will happen when users attempt to log on to the domain while the server is shut down? (answer: a)
a. Users will log on successfully and will receive their profiles, but any changes made to the computer will be lost.
b. Users will not be able to logon to the domain.
c. Users can choose to log on to the domain and select a profile that is stored on a different server.
d.Users will log on successfully and will receive the Default user profile.
2. You have 3 Win NT servers with RAS installed on 3 different network segments. Win NT workstations dial into the servers. How would you minimize the time to resolve the NetBIOS names? (answer: b)
a. Install an LMHOSTS file on RAS server
b. Install an LMHOSTS file on each workstation.
c. Disable NetBIOS interface
d. Install WINS on Workstations
3. You have a mirror set with SCSI disks with BIOS enabled and one disk fails. How do you set up the ARC path on your boot-disk? (answer: c)
Disk 0: system, Data, Data
Disk 1: Data, Mirror set, Data
a. multi(0)disk(0)rdisk(1)partition(0)
b. multi(0)disk(0)rdisk(1)partition(1)
c. multi(0)disk(0)rdisk(1)partition(2)
4. You have a network with one NT server, 10 Win95 clients and 5 NT WS. Every day you want to back-up the server and once a week you want to back-up the clients (95+WS). How do you do that? (answer: c)
a. Put one Tape Device on WS and 1 on 95
b. some other possibilities
c. Put one Tape driver on the Server
5. You have an WinNt Server that runs IPX, and you have a NetWare client. What will the client be able to access. (answer: b)
a. Directories
b. Client/server applications that support NetBIOS
c. Printers
d. Access nothing
6. How would you install Win95 over a network? (Choose all) (answer: a/d/e)
a. Share Win95 Installation files
b. Make Win95 installation startup disk with Network Client Administrator
c. Make Installation disk set with Network Client Administrator
d. Boot up using startup disk
e. Install using disk set
7. You want to monitor disk space usage on a WinNT Server. You want to be notified when disk space is under 25%. How? (answer: b)
a. Server Manager - Alerter
b. Performance Monitor - Alert on % Free space counter
c. Start Diskperf with AT-command in Schedule now and then
8. You have 4 physical disks with 250 MB of free space each. You want to create a strip set w/ parity. What will be the actual size of the stripe set? (answer: c)
a. 250
b. 500
c. 750
d. 1000
9. You are administering a Windows NT Server computer from a Windows 95 client computer. You install Server Admin Tools on the Windows 95 computer. You want to share a CD-ROM drive that is attached to the Windows NT server computer. What must you use on the Win95 computer to do this? (answer: b)
a. Net.exe utility
b. Server Manager
c. Disk Administrator
d. Windows NT Explorer
10. You have 2 SCSI drives each with a 1GB partition with their own disk controllers. You want fault tolerance and you want to be able to continue to use one of the drives should they fail. (answer: a)
a. disk duplexing
b. volume set
c. stripe
d. stripe with parity
11. What file do you need on an NT boot disk for a SCSI w/o bios enabled?
(answer: ntbootdd.sys)
12. You have a few NT servers in your network. You want to use the performance monitor on your NT workstation to monitor the NT servers. What must you do? (answer : a)
13. What happens to file permissions when you use Windows NT Explorer to copy files from one subdirectory to another one on the same NTFS partition? (answer: d)
a. All file permissions are set to full control for the Everyone special group.
b. All file permissions are discarded.
c. All file permissions are retained.
d. All file permissions are inherited from the destination subdirectory.
14. You want to prevent all users except members of the administrators group from logging on to the domain from any of the domain controllers. How? (answer: c)
a. Remove all users except members of the Administrators group from the Interactive special group.
b. Place all users except members of the Administrators group in the Interactive special group.
c. Ensure that only members of the Administrators group have the right to logon locally.
d. Ensure that only members of the Administrators group have the right to logon to a domain controller.
15: You set up directory auditing as shown in the exhibit. How will auditing be performed? (answer:c)
On the exhibit you see the following:
Window "Directory auditing",
Directory: e:\corp, no cross in "replace auditing on subdirectories"
A cross in "replace auditing on existing files".
Name: group Everyone
Success Fail
Read no no
Write YES YES
Execute no no
Delete no no
Change Permissions YES no
Take Ownership no no
a. Any unsuccessful attempts to delete a file in the e:\corp-directory will be audited.
b. Any files that are moved from a directory located on the same partition will inherit this Audit policy.
c. Any attempts to make changes to an existing file in the e:\corp-directory will be audited.
d. Any unsuccessful attempts to modify a file in the e:\corp-subdirectories will be audited.
16: Your network has three Windows NT Server computers. You want to change the role of one BDC so it becomes a PDC. You are working from a Windows NT Workstation with Network Administration Tools installed. How can you change the role of the PDC? (answer:d)
a. Shut down the existing PDC. Use Server Manager to promote the desired BDC to a PDC.Restart the old PDC. It will be automatically demoted to a BDC when the new PDC is detected.
b. Shut down both the existing PDC and the BDC that will be promoted. Restart the BDC. It will be automatically demoted to a PDC when no other PDC is detected.
c. Use Server Manager to stop the Net Logon Service on both the PDC and the BDC. Promote the BDC to the PDC. Demote the old PDC to a BDC. Start the Net Logon Service on both.
d. Use Server Manager to promote the BDC to a PDC. The existing PDC will be automatically demoted.
17: You want to perform a tape backup of the registry files of the Windows NT Server. How must you use the Windows NT Backup program to do this? (answer:c)
a. Select differential as the backup type.
b. Use the Windows NT backup program from a remote WinNT Server computer only.
c. Specify at least one file on the volume that contains the registry.
d. Stop the server service.
18. You configure a stripe set without parity on three physical disks. One of the disks fails. What can you do to recover data that was stored on the stripe set? (answer: d)
a. Break the stripe set and recover data that was shared on the stripe set?
b. Install a new hard disk to replace the failed disk and choose Regenerate from the Fault Tolerance menu in the Disk Administrator.
c. In the Check for Errors dialog box in the Disk Administrator, select File System errors to recover the lost data.
d. Restore the lost data from the tape backup.
19. Your RAS server has two internal modems. Remote users report that when they try to dial in to the RAS server, they are being disconnected immediately. How should you diagnose the problem? (answer: a)
a. Use the Registry Editor to enable device logging.
b. Use Performance Monitor to view RAS connection details.
c. Use Network Monitor.
d. Use RAS admin utility to view the port status.
20. Your network is configured as a single domain named DOMAIN1. The network has one PDC, two BDCs, and two member servers. Some of the network workstations run Windows NT Workstation and some run Windows 95. The Directory Replicator Service on the PDC is configured as shown in the exhibit. Which computers will receive replicated files from the PDC?
(Choose all that apply) (answer: a/c/d)
On the exhibit you see the following:
A window named "Directory replication on NTSERVER1", a cross in Export
Dir, To: DOMAIN1
a. All the BDCs that are configured to import from the PDC
b. All Windows 95 computers that are configured to import from the PDC
c. All Member Servers that are configured to import from the PDC
d. All NT Workstations that are configured to import from the PDC
e. All Windows for Workgroups computers that are configured to import from the PDC
21. Your network uses NWLink IPX/SPX Compatible Transport protocol. Half of the client computers use 802.3, the other half use 802.2 frame type. You are adding a Windows NT server computer to the network. This server has one network adapter. What must you do on the new server? (answer:c)
a. Install and configure RIP for NWLink IPX/SPX compatible protocol.
b. Configure NWLink IPX/SPX compatible protocol to use Auto Frame Detection.
c. Configure NWLink IPX/SPX compatible protocol to use Manual Frame Type detection. Add the 802.3 and 802.2 frame type.
d. Install the driver for the network adapter twice, once for each frame type. Configure each instance of the driver to support one of the required frame types.
22. Your Windows95 client computers access shared resources on a Windows NT Server. The Windows95 computers have Client for MS networks installed. You want to allow the Windows95 client computers to access files on a Netware Server. You install Gateway Service for Netware on the Windows NT Server.
What else should you do on the Windows NT Server computer to allow the Windows95 client computers to access files on the Netware server? (answer: c)
a. From the WindowsNT Explorer, use the Map Network drive button to connect a drive to the Netware Server. Then share that mapped drive.
b. From Server Manager use the Shared directories option on the Computer menu to share the desired directories on the Netware Server.
c. From the GSNW option in the Control Panel, use the Gateway option to share the desired directories on the Netware Server.
d. [another wrong answer not written down]
23. A Win NT Workstation dial into a RAS server. The server is setup as follows:
Dial Out Protocol
NetBEUI
TCP/IP
IPX/SPX
Remote Clients
NetBEUI
TCP/IP
Encryption
Clear text.
What is the WS able to do (select all)? (answer : a/c)
a. Use resources on the RAS server
b. Use applications that require IPX/SPX
c. Use applications that require WinSocket
d. Use applications that uses NetBios
24. You have a Win95 PC with client administration for NT installed and a Win NT Server. You want the computer to be able to connect to a NetWare Server. How do you do that? (answer: a)
a. Install GSNW on server
b. Map the drive on the NetWare Server
c. Server Manager - Shared directories
d. Usermanager for domains - Logon To.
25. You have a computer with 5 disks - each with 2 partitions. On the first disk is the boot and system partition. How will you optimize the pagefile? (answer: b)
a. Place the pagefile on a disk other than the first disk.
b. Place a pagefile on each disk except the first.
c. Place the pagefile on the boot and system partition.
d. Place the pagefile on a partition other than the boot and system partition.
26. You have 30 MS-DOS machines, 20 WFWG machines, and 1 NT server machine. You want the MS-DOS and WFWG machines to be able to connect to 2 NetWare Servers. What is required on the NT server?
(answer: b and c)
a. RIP
b. NWLink
c. GSNW
d. nothing
27. You have a NT Server running IPX and some kind of client also running IPX, but they are not able to connect. Why? (answer: b)
a. Wrong subnet
b. Wrong Frame Type
c. Permissions are set to No Access
28. An user with a Win95 client connect to a shared printer, but cannot access. The administrator puts her in a group with correct rights, but she still can't connect. Why? (answer: c)
a. She use wrong password
b. She does not have an account in the domain
c. The change of group will not take effect before she logs off and logs on again
29. You want to install a new video card on your WinNT Server. What must you do? (choose all) (answer : b and d)
a. Reinstall NT Server
b. Start up in VGA-mode
c. Select "last known good configuration"
d. Install video card driver using Control Panel Display properties.
30. You are running Performance monitor on a NT Workstation. You are monitoring memory and disk performance on 10 WinNT Servers. Performance on the Workstation is poor and you want to increase performance but how? (answer: d)
a. System properties - decrease time for foreground application
b. Run Performance Monitor from a Command line useni /START
c. Start diskperf to build up a big cache
d. Increase the time you are collecting data
31. Your pagefile has increased its volume. How will that affect? (choose 2) (answer: a and c)
a. Applications will start more slowly
b. I/O of the network will increase
c. The disk will be fragmented
d. Current content of the pagefile will be lost.
32. You want to make it easier for yourself to make user accounts. Therefore you make a template called USER_TEMPLATE and assign permissions and groups to the template. How do you use the template when you make new accounts? (answer:c)
a. New account automatically get the permissions and groups specified in the template
b. You have to create a global group called USER_TEMPLATE and put new accounts in here
c. You simply copy USER_TEMPLATE to a new account
d. You create new accounts and highlight them, and copy USER_TEMPLATE into them
33.You have a network with 3 NT Servers. In the network there is 50 Workstations. All computers are running TCP/IP. Now and then a group of people have to copy 100MB of data to one of the servers. That slows down the network. How can you prevent this? (answer: a)
a. Install a new Network adapter card on a different subnet and enable ip-routing
b. Let them run NetBEUI
c. Give the same Network Adapter 2 ip-addresses
d. Install a new Network adapter card on the same subnet and enable ip-routing.
34. You are installing a Network printer that prints for WinNT 4.0 and WinNT 3.51 users. What about the drivers? (answer: b)
a. Install one driver for NT4.0 and NT3.51.
b. Install separate drivers for NT4.0 and NT3.51
c. ??
35. You have a network printer and proper permissions but you still can't access it. Why? (answer: d)
a. The printer is already installed
b. You forgot to specify the printer port
c. Wrong driver
d. You forgot to install DLC
36. You move a file from a NTFS to a FAT partition on the same disk. (choose all) (answer: a and d)
a. LFNs are retained
b. The LFNs are inherited
c. The permissions are retained
d. The permissions are not retained
37. What must be installed before you can migrate users from a NetWare Server to NT. (answer: b)
a. RIP
b. GSNW
c. SAP Agent
d. TCP/IP
38. In Performance Monitor, which objects/counters should you use to measure excessive paging?
Answer: Memory: no. of pages/second
39. A server has poor performance and you suspect that it is paging excessively. What do you do? (answer: Add more RAM)
40. You want to migrate your NT 3.51 to NT 4.0 and you want to keep your current configuration. What must you do. (answer : b)
c.
41. You want to create a new partition using the free space on a SCSI hard disk. You choose Create on the Partition menu in Disk Administrator and enter the desired size in the Create Logical Drive of Size dialog
box. A new logical drive now appears in Disk Administrator. What else must you do before you can format the partition? (answer : c)
a. choose Mark Active from the Partition menu
b. choose Mark Primary from the Partition menu
c. choose Commit Changes Now from the Partition menu
42. Several NetWare 3.x clients on your network need to access files on your Windows NT server. Which of the following must be installed on your Windows NT server? (answer : d)
a. Client Service for NetWare
b. File and Print Services for NetWare
c. Gateway Service for NetWare
43. Your Windows NT Server computer has 4 SCSI hard disks, each attached to a separate controller. Which of the following fault tolerant strategies would you implement on your Windows NT Server computer? (answer : c)
a. disk sparing
b. disk duplexing
c. disk striping with parity
44. You are configuring TCP/IP in a non routed network. You have configured the IP address what else must you configure. (answer : b)
45. Single Domain + 4 servers. Needs notification when system event occurs on any server. How? (answer : d)
a. Add user to Server operators group
b. Start alerter on each workstion
c. On PDC Server Manager, Add Domain Administrator group to alert for each server.
d. On each Domain controller, server manager, add your user name to the list of names that should receive alert.
46. 10 workstations moved from the Branch office to the Headquarters in a domain named CENTRAL. You want that the Branch office's workstation become member of the CENTRAL domain. (answer : b)
a. The Domain Administrator use the server manager to add the workstation in the domain. The workstation administrator must log at each workstation to join the domain
b. The Domain Administrator must log at each workstation and create a computer account in the domain and then join it
c. The workstation administrator must log at each workstation to create the computer account in the domain then join it.
d. The workstation administrator must reinstall Windows NT and configure the workstation to join the domain.
47. Which of the following procedures will allow you to install Windows NT Server over the network onto an MS-DOS computer? (answer : b )
a. boot the MS-DOS computer from the Network Installation Startup Disk and run Setup.exe from the command prompt
b. boot the MS-DOS computer from the Network Installation Startup Disk and run winnt.exe from the command prompt
c. connect to the network directory that contains the Windows NT installation files and run Winnt32.exe
d. connect to the network directory that contains the Windows NT installation files and run Setup.exe
48. Performance Monitor - doing test on 5 different PCs over a week. Which do you use? (answer : a)
a. create a Log file
b. use the Chart view
c. create a Report file
d. use the Graph view
49. All computers on the network use NWLink as the only network protocol. Network seems slow. What is the mostly likely cause of the problem? (answer : a)
a. incorrect frame type
b. protocol mismatch
c. upper memory area conflicts
d. faulty connectivity devices
50. Documents fail to print because the partition in which the spool directory is located, is out of space. What do you do? (answer : a)
51. You have one windows NT as a RAS server. the workstation dial in the RAS server to access a database file located on another Win NT server (in the same domain than the RAS Server). You also have third party PPP workstation without encryption support that must access the database file. How can configure the safest communication system for all workstations ? (answer: d)
a. Configure the RAS server with "require encryption authentification"
b. Configure the RAS server with "accept all including clear text" and the Database server with encryption
c. configure the windows wk to dial in a specific modem, and set the RAS server to "require Microsoft authentication"
d. configure the RAS server for accepting only specific user accounts
52. To use RAS Autodial, what do you need?
53. You want to monitor disk space usage on a WinNT Server. You want to be notified when disk space left is under 25%. How? (answer: b)
a. Server Manager - Alerter
b. Performance Monitor - Alert on % Free space counter
c. Start Diskperf with AT-command in Schedule now and then