NTFS permissions - remember that when you copy a file it inherit target older's permissions - does not matter if it is on same partition or not. hen you move a file within same partition you are simply changing the pointer so it retain original permissions.
Performance Monitor - a few questions on setting up alerts and some of the indicators. Know how to enable the disk monitor which are disabled by default. Here was a question...You are monitoring 8 servers with five monitors for each server with alerts set to report on activity every 5 seconds, and many of your PC's functions are running rather slow. How do you improve you PCs performance. ANS: Set the alert for a greater interval like every 2 minutes.
Also, make sure you know about optimization, and the Performance Monitor! And if you don't know about printing, and NetWare, read now! I did, and it paid of hugely!
Make sure that you have a good understanding of the domain models, trust relationships, and user accounts on a domain (and what those accounts would have access to in a trusted environment.)
Know the basics of replication governor, which side enlargens the buffer and which side sets the frequency
Know when to use the emergency repair disk as opposed to last know good configuration
Know RAS like your best friend. I got about six questions related to RAS.
How do you remedy a stalled printer?
Printer jams. When cleared, how do you restart the print document?
10 Q's on fault tolerance. 7 Q's on netware. 15 Q's on user rights
How do you convert a NTFS partition to FAT? FAT to NTFS?
What is retained when copying from NTFS to FAT? Permissions? Long File Name?
How you restore files when 2 disks die with disk striping with parity?
How do you restore the registry when the system disk dies?
How do you restore strpiing with parity after system disk dies?
How do you upgrade a member server to a BDC/PDC? PDC/BDC to member server?
How do you upgrade a workgroup to a domain when you get your first PDC?
How do you move a PDC from one domain to a BDC in another domain?
User in global group is granted access to folder in trusting domain. Global group is a member of local group in trusting domain w/ change rights to an NTFS folder. Global group is granted read permission to the NTFS folder, and read share permission. Which rights are retained?
A computer is setup as a TCP/IP router. What needs setup on it to route requests for a DHCP server on one subnet to a DHCP agent on another?
If you forgot to create installation diskettes, but created an emergency boot disk, how would you use the emergency boot disk?
How do you reduce traffic from PDC to BDC on the PDC? Increase Pulse or Pulse Concurrency in the registry?
What program do you use to read *.dmp files?
In Performance monitor, What do you set to run a test on a multi-processor computer to test all processor's?
What fault tolerance uses 2 hd's and 2 hard drive controllers?
What disk setup for 6 disks would be the fastest?
How do you recover from 2 disk failure with disk strpiing w/ parity? 1 disk
failure?
How do you recover from disk mirroring?
Lots of trust questions!
4 netware questions
How do you access a NT Server from netware workstations?
What user do you add to novell for gateway services?
what do you add to client workstations after novell to nt migration?
Users want to login via RAS. Need secure encryption for passwords and data sending. What encryption would you use?
No questions on License Manager.
No questions on IIS.
No questions on the Distributed File System, which bugged me since it is =
such a cool feature on NT.
As expected, Netware interoperability a biggie. Gateway Services for =
Netware (configuring), Client Services for Netware. Remember Gateway is =
installed on the server, Client services on the client. =20
If you have an NT server on a Netware network, with all Netware clients, =
all you need is the NWLink protocol on the NT server for connectivity =
between the NW clients and NT server.
Printing was moderate. Such as...You are installing an NP printer =
directly to the network (not on a server) and while trying to configure =
printer from NT printer you do not see the HP printer port. Why? No =
DLC protocol installed on the NT server.
What happens if you print to a printer that is only available later in =
the evening? Print job will be saved in the spooler until time comes =
when printer can be printed to.
What happens in a printer pool of two printers, when printer A's job =
jams. Does B finish it? NO!
ras connections fails. How to troubleshoot a ras connection.
device.log file should be created changing the registry
Know about AUTODIAL capabilities
KNOW this back to front and inside out. The questions were a little
tricky and you had to decipher the combinations i.e. which has priority,
when to accumulate and that NO ACCESS is dominating.
KNOW that you lose permissions going from a NTFS to FAT partition
(copying files).
KNOW moving files on same PARTITION retain original permissions.
KNOW SHARES have FULL CONTROL, READ, CHANGE + NO ACCESS. Oh yeh you can
set this on a FAT partition SHARE accross the network (but not if users
log in locally).
KNOW WHO can take ownership of a file and then how to organise ownership
to someone else.
I.e.
1) Admin take ownership
2) Assign Take Ownership permission to other user
3) Have other user take ownership.
PRINTING:
---------
KNOW that a PRINTER POOL uses all the same printer drivers.
KNOW how to set up a PRINTER POOL and know MS terminology - PRINTER
(QUEUE), PRINTER DEVICE (actual hardware printer).
KNOW what rights can be assigned for users printing.
I.e.
When to assign Printer Operator
When just to assign Printer permissions to users
When to assign Document Management.
KNOW Control Panel - ServicesDialog, to start/stop SPOOLER SERVICE
(when its stalled).
KNOW where to change PRINTER SPOOL files.
RAS
---
UMD to grant permission to user to connect to RAS server
KNOW the different Authentication MODES i.e. - PAP, DES, MS-CHAP and
whenyou use them.
RAID:
=====
If you don't KNOW RAID well before you walk in you will probably lose
10% of your marks.I had 4-5 questions on RAID.So know RAID like the
back of your hand.Oh yeh you'll get a question on how to BOOT when the
main drive of a Mirror Set is down.This includes breaking the mirror
but only after you have booted using a boot disk that you have edited
the boot.ini and changed the ARC naming convention line to point to the
good mirror partition.So know the ARC naming convention, but you'll
have to be able to apply this to the hard drive senario of the question.
MISC:
-----
KNOW how and where to set up users HOME DIRECTORY (in USER ENVIRONENT
PROFILE dialog box).
KNOW that UMD and ACCOUNT POLICY menu selection for setting for all
users.
KNOW how and when to use ERD.
Didn't have much at all on trusts but one question required me to
understand TRUSTS and create a GLOBAL group add domain users and put
this GLOBAL GROUP in the local group on the servers.(I think it was
backup Operators).
KNOW the basics of GSNW strongly...didn't go into it too deeply but you
had to know that it was used to provide MS users access to the NETWARE
server via the GATEWAY on the NT server.Know that you need NWLink
installed.
You have 40 clients who spend most of their time accessing LAN resources using netbeui.Only rarely do they use tcpip to connect to the WAN.How do you optimize?
a- move netbeui up on the server
b- move netbeui up on the clients
c- move tcpip up on the clients
d- move tcpip up on the server
e- binding order will not make any difference
choose ONE
Know what goes onto a boot up disk for various applications.Remember you only need NTBOOTDD.SYS if your scsi drive does not have the BIOS enabled.
1. What type of encryption should be used when you went users to select their own method of connection?
2. After creating a partition in Disk Administrator what must you do before you can format the partition?
3. Several jobs have been sent to print server, jobs did not print and cannot be deleted. How do you fix?
4. How do you complete a NT network install on a DOS computer?
5. You have 1 PDC and 3 member servers. How do you change one of the member servers to a BDC?
6. (exhibit) Scott was a member of Sales group promoted to Marketing. He needs to work on a file that Marketing has access to but Sales doesn't . He cannot access folder, what should be done?
7. WfW 3.11 clients on NT server network need access to resources located on
a NW server. What needs to be installed?
8. What counters should be monitored to determine if excessive paging is
occurring on a NT machine?
9. 2 ARC questions
10. 2 people constantly drop connection after logging on to RAS, how to
troubleshoot?
11. TCP/IP in a NON-ROUTED network, she manually assigns an IP address.
What other parameter must be installed?
12. A tape backup drive and a SCSI controller for the tape drive must be
installed on a new system, which must be done to enable these hardware
device? (Pick three)
13. Users have their home directories stored on their local drive, for admin
reasons directories are created on domain's PDC. What must be done to allow
each user to start using their new home directories?
14. Mandatory profiles question. I'm too pissed off about this one to continue.
I've seen every possible answer for this question. I have no idea what the
answer is.
15. Network= PDC, BDC, 3 member servers and 50 workstations. You want to
be alerted if the % processor time counter for any server exceeds 80%, How?
16. Network= PDC, BDC, 5 member servers and 50 workstations clients.
Running full back up from PDC for all computers, it takes to long. What's best
way to configure to reduce the amount of time?
17. How to improve performance if excessive paging is occurring on the server?
18. SCSI CD-ROM not detected during NT install, how do you resolve?
19. Which type of computer is capable of becoming an export server?
20. Copy files from one folder to another, same NTFS partition. What happens?
21. How do you redirect print jobs on a failed printer?
22. (exhibit) You want to replicate files to other servers in your domain, where
should files be placed.
23. System partition on NT computer has failed. After replacing the failed disk,
how do you restore the registry?
24. What is the first thing you do to restore a mirror set?
25. The system and boot partition has failed on the PDC. Disk mirroring is used.
How do you modify the Boot.ini file on your boot floppy disk to point to the
mirror partition?
26. Adding NT server to Netware 4.x network, server provides access to a SQL
server application for the Netware clients. What must be installed on the server?
27. New Domain consists of PDC, BDC and a member server. What must be
done to allow NT workstation users to log onto the domain.
28. To create a new shared directory on a domain server what Administrative
tool do you use?
29. How would the NWLink IPX/SPX properties dialog box be configured on
the NT server to recognize multiple frame types?
30. What is used to backup the registry?
31. System has 3 physical disk, each has one primary partition. Boot partition is
located on 1st physical disk. How would you optimize paging files on the
system?
32. Configuring NT server on domain as a gateway to Netware server. GSNW
is installed on NT server, what else must be done to enable users of your
Microsoft network to access the Novell server?
33. What other parameters can be assigned by a DHCP server?
34. Running NT server tools for Win 95 on Win 95 workstation, what application
do you use to control the permissions of files and directories on an NTFS ?
35. How do you convert a FAT partition to NTFS while preserving all of the
data?
36. How do you implement fault tolerance on NT server? (know min
requirements for each)
37. What condition must be satisfied to create a printer pool?
38. One computer cannot connect to the network, all computers use NWLink
protocol, what is the most likely cause of the problem?
39. Monitoring 10 performance counters every 2 seconds on 8 servers. Counters
are slowing down the other applications on the machine, what is the best way to
fix problem.
40. Upgrading the operating system on your computer from NT 3.51 to NT 4.0.
What is the best way to perform the upgrade and preserve all settings?
41. Gather TCP/IP performance stats remotely from a server in your domain
using your workstation. What must be done first before tracking the TCP/IP
performance counters using Performance Monitor on your workstation?
42. A member from a stripe set w/ parity fails, how do you recover?
43. Creating a recovery disk , boot partition is on a SCSI disk and the BIOS is
NOT What file must be included on the boot disk?
1. Excessive paging- what counter
2. Boot sector virus-clean the machine and restart, says on operating system.
How do you recover?
3. win 3.11 and win 95 clients on NetWare servers( with clients for netware
networs installed). Add NT server with client\server app. How can the cliens
access the NT server
4. User has a local profile. How do you set up profile so that whichever NT
workstation he logs on to he gets the dame desktop.
5. Ras- 2 modems, users get disconnected. How do you enable device.log to
troubleshoot.
6. Question about bindings- remote site use netbios for local net 90% and log on
central with tcp/ip 10%. both protocal installed on remote clients, remote servers,
central servers. How do you optimize local client's network performance
7. Mirror partition and primary drive fails, choose the arc path that points to the
mirrored partition
8. monitoring 5 servers for different counters, performance really slow, how do
you improve peformance?
9. stripe set fails, you replace the drive? what is the final step. ( comit changes)
10. two different questions on choosing the method of fault tolerance
11. Dhcp server -what all can you assign with it. choices were - default
gateway, subnet mask, ftp server, mail server, wins server
12. couple of questions regarding ARC paths
13. Procedure for Network based installation of NT server on a MS dos PC
14. Jobs not printing, cant be deleted. What do you do?
15. Printer down. How do you redirect the jobs to a remote printer?
16. 95 machine with client based admin tools. How do you share folders
17. same machine, question about printer setting
18. monitor tcp/ip activity on 3 servers fro WS? do you set up 1. SNMP on WS;
2. SNMP on servers, 3&4 were some TCP/Ip counters
19. Question about PPP settings.
20. 3 domain controllers, roaming profiles, PDC goes down- choices 1. use
cannot log on;2. log on with default profile; 3. redirected to log on to another
server;
21. move file within same NTFS partition, what happens to permissions.
1. user7 promoted from sales to manager added to manager group,
need access to privdata, could not access?
2.dos and win 3.11 clients need to access netware, what do you install
on ntserver.
3.netware clients need to access nt, what to install on ntserver.
4.you want to migrate from netware to nt, what you install on nt server.
5.nt ws wants to use netware, already have csnw, what else?
6. you installed gsnw on ntserver, what else to enable nt user use
netware.
7. what else can be configure with dhcp (choose all that apply)
8. in an unrouted network what else you need to configure beside ip add.
9. you add 40ws. from workgroup to server what to do?
10. dos machine you want to install nt over the network?
11. dos machine install locally from cdrom.
12. installation does not recognize you scsi cdrom
13. counter for excessive paging.
14 monitor 5 server from a remote ws.
15. global group acc. manager need to access file on a new
member server, what to do.
16. execcive paging what to do.
17 where to create printer share from ws.
18 file share from w95
19 file copy from ntfs to dos what happened(choose two)
20 arc path of second drive scsi disable second partition'
21 one member of mirrorset failed, you replace the disk , what you do
next.
22. one member of strip set with parity failed, what to do?
23.you have two disks two controller, what fault tolerence method?
24. you have four disks 2gb each fault tolerence, maxiumum storage?
25. page file on sys. partition, you have two disks, what to do?
26.how to promote ms to bdc.
27. server with roaming pofile down, what will happen?
28 how to create a roaming profile on bdc.
29.remote users disconnect immediately after connecting to ras?
30. remote user third party software to logon encryption level?
31. you want to allow user to set their own dialin permission what to
config?
32. routed network tcp/ip & netbui used what else to do.
slip for tcp/ip
33. what to do to monitor tcp/ip on 5 servers?
34. virus in sys partition you fixed the problem , how to boot?
35. how to create share on a remote server from a pdc
.36. job stuck in printer?
37. printer broke down, how to install new printer, to print jobs
in que.
38, requirement of printer spool.
-should be in same room?
-should be attached to the same server?
-should be attached to the same port?
-should use the same driver?
39.multiple netware multiple frames, what is the default with autO?
40. less than 10 user connect to server at one time. what kind of
server service?
41. four hardisks, 350, 400,400,500. maximum amount of data storage
in stripset witn parity.
42. make a boot disk for mirror set how to do?
43.scsi disable bios what file req. for boot disk
44.performance monitor, disk space goes less than 25% send alert?
45. upgrade from win95 to nt
46. where to backup while server is running.
47. you have four disks what fault tolerence method, so max. space
is available. dswp
48. min no. of disk req. in dswp
50 one central location and three remote locations. ws use 90% local
1. NW clients and NW servers. 1 NT server running a Netbios App. What do
you install on NT?
2. How to create a HomeDir on a BDC for a user?
3. What to use to manage printer security on NT server from Win95
4. Three domain ctrls, 25 NT ws. Mandatory roaming user profile. The server
with the profile is down. What happens when the user trys to login for the first
time?
5. A user wants the same desktop no matter where they logon. How?
6. Single domain, four domain controllers. All network administrators use NT
ws. You want to provide notification to administrators in the domain when a
system event occurs.
7. Your RAS server has two modems. Remoter users get disconnected
immediately when they dial in. How do you diagnose the problem
8. Print device on server fails. Try to send waiting documents to another printer.
9. You plan to set up a server. Data on a different partition than system. Fast
data retrieval, continued access in event of hard drive failure.
10. How to put a ws into a domain
11. Convert FAT partition to NTFS without losing data
12. Excessive paging on server. Which activity to look for in performance
monitor
13. How to increase performance of server for less than 10 connections. Which
setting
14. You want to view contents for TCP/IP connectivity on three servers. Run
performance monitor on your ws to view this info. What must you do before you
view these counters.
15. NT server with 4 x 2 gig hard disk. You want to be able to continue
operations if one disk fails. You want fault tolerance. You want to maximize disk
space.
16. Server boot sector virus. You erase MBR. After restart you receive
message that operating system could not be found.
17. Stripe set with parity. Three drives, 1 scsi controller, one disk fails. Drive
that contains boot files and system partition was unaffected. What to do
18. Give the ARC pathname in boot.ini for the disk1: Both disks are SCSI with
BIOS disabled . What is the entry in boot.ini for disk 2?
19. You have a mirror set with SCSI disk BIOS enabled and one disk fails. Arc
path on boot disk
20. You have 2 netware servers and 100 netware clients. You add a Win NT
SQL server. You make the NT server a member of the netware domain, then
what
21. You have a RAS server in which clients of MS-DOS and Win95 login to.
They have client for MS networks and NWLink installed. You have a netware
server. You want the clients to be able to access all resources on both Netware
and NT.
22. What can be an export computer
23. How do you connect a Win95 to a share on an NT server using admin tools
24. What happens to file permissions when you use Exployer to copy files from
one subdirectory to another on the same NTFS partition
25. You want to prevent all users except admins from logging on to the domain
from a domain controller
26. You setup directory auditing. How will auditing be performed?
27. Your network has three NT servers. You want to change the role of the
BDC to PDC. You are working from a Win NT ws with network admin tools
installed.
28. You want to share a CDROM that is attached to a WinNT server using
Win95 ws.
29. You want to perform a tape backup of the registry files on an NT server.
30. You configure a stripe set without parity on three disks. One of the disks
fails
31. You add a new SCSI controller and a network adapter to an existing NT
server. After you start the server you receive a message that says "The
dependency server failed to start". Where do you look for more info
32. Documents are failing to print due to lack of disk space.
33. Your network is a single domain named DOMAIN1. It has a PDC, two
BDCs and two member servers. The ws are NT and 95. The directory
replicator service is configured as shown below. Which computers receive
replicated files? (choose all that apply)
34. Your network uses NWLink using frame type 802.2 and 802.3. You are
adding a WinNT server to the network. What do you do
35. You have Win95 ws with MS networks installed and they want to access a
netware server. You install GSNW on the NT server. What else should you do.
36. How would you install Win95 over the network? (choose all that apply)
37. You have 4 disks with 250 MB of free space ea. You want to create a stripe
set with parity. What is the actual size of the stripe set?
38. You have NT ws that connect to a RAS server using data encryption while
a second group connects with a 3rd party connection protocol that doesn't
support encryption.
39. You are taking 10 NT ws from the branch office to the main office and want
to add them to the main office domain, DOMAIN1. What is the best way
40. How do you change the location of a print spool?
41. How to setup boot up floppies from CDROM
42. How do you upgrade from 3.51 to 4.1 and preserve all configuration
settings?
43. Exhibit - RAS server allows remote client to run NetBEUI, TCP/IP (dial in
configuration). What can the client access.
44. You want to monitor disk performance for 1 week. What performance view
do you use.
45. You want to be notified when disk space on 5 servers is less than 25%. How
do you set it up?
46. You install new video card. Your server didn't boot right. What do you do?
47. You want to migrate from Netware to NT. What must be install on NT?
48. You have 200 PCs with identical SW and HW. How do you automate the
build. Choose three
49. A user prints and has a paper jam. His app can't reprint.
50. You have NT on a single NTFS partition and want to install DOS. How do
you do it?
51. You want performance monitor on network activity, which protocol or
service do you install?
52. You want to resolve UNIX host names to IP Address on an intranet. Which
TCP/IP option?
53. What do you do to create the three NT setup disks
54. Minumum NT server requirements for a Netware client to access a NetBios
compatible client server application on an NT server.
55. How do you make a system partition redundant
56. DHCP server allocates IP addresses and what else.
57. What is the highest possible security with client using DES
58. You are installing NT server your non-SCSI CDROM isn't detected. What
to do?
59. Performance for file sharing of less than 10 users.
60. Optimizing page file
61. You have an NT server that runs IPX and you have a netware client. What
will the client be able to access.
62. Your server has 2GB SCSI disks with 1GB partitions. Your system files and
paging file is on the first disk. How do you increase performance?
63. You have just installed an NT SQL server on a NW network. What protocol
is necessary?
64. You are installing third party software on your RAS server for clients to dial
up. You will also need
65. You dial in to a remote server from 95 you need a secure password
encryption
66. To use directory replication you should put the files where?
67. When running PPP on your RAS server, what protocols can your client use?
Choose all that apply
68. You install NT server tools on a 95 pc. You want to change the security
settings on a remote printer.
69. You want to install NT from the CD onto a machine running DOS
70. In server manager what icon is the PDC?
71. In server manager what icon is the BDC?
72. What is required for printer pool?
73. Which levels of RAID can contain system and boot files?
74. What can a local group contain?
75. What can a global group contain?
76. Unauthorized user on network so you decide to audit logons and find every
user account has 100+ logon attempts within one minute. What do you do?
77. You boot NT, select MSDOS and get "Non System Disk" what could be
wrong?
78. What would you do at the disk admin after you have created a partition and
would like to have it formatted?
79. SCSI disk on 1 controller, you have implemented RAID 1, your disk fails,
what must you do?
80. Your NT server rarely has more than 10 connections. Which option should
you choose?
81. Remote users on Win95 dial in to RAS with 3rd party PPP DES encryption.
What is the highest possible security you can implement?
82. Remote users set own level of password encryption?
83. Move files from NTFS of same partition, permissions
85. How can you connect to multiple RAS sites
86. Which users can create shares?
87. Unsupported modem, how do you configure it?
88. You make changes to services install where will it be updated in the
registry?
89. Replication Governor is configured, what will it do?
90. You have a group of 15 researchers that need a network for print and some
file sharing. Security is of ultimate concern. What type of network?
Users complain they are trying to print to a print server. They have sent several jobs, but none have printed. You can't delete them. How do you solve this problem?
2. A printer goes down and several jobs are stuck. How do you re-direct to a working printer? Much of the Netware questions dealt with going from Netware TO NT, so be sure to read questions carefully.
1. Company A has Netware 3.X. Machines need access to a newly installed NTServer. To support access, what services / protocols need to be installed (pick all)
File and Print Services for NetWare (FPNW) and NWLink. Remember,Gateway Services provides the access from NT TO Netware. This is going the otherway. That's why you don't check the boxes for GSNW or Client Services forNetware.
2. Company A has a Netware Network, but needs access to SQL Server
applications. What elements / protocols need to be available on the NT Server?
NWLink IPX/SPX. This is a trick question because SQL is a client/server
application. That means the NW clients already have the software necessary to
communicate with the server. File and Print Services looks tempting, but
client/server apps supply their own client side intelligence. DON'T PICK IT.
Know that the 802.2 frame type is the only frame type NT auto detects, and
that is Netware 3.12 and higher.
Remember you need to map a drive on the NT Server to the Netware shares,
and
permissions can only be managed through the GSNW. Printers, can be managed
through printer manager, though.
Backup questions very easy:
1) What type of licensing mode is it where each client access license is assigned
to a particular server and allows one connection to that server
2) Which of the following are valid server roles ?
3) What does the gateway service for netware do?
4) Which tool would you use to change the preferred Novell server for your NT
clients
5) When you share a directory using windows NT explorer what are the default
permissions assigned
6) You have created a mandatory user profile for a user called Fred , the profile
lives on the PDC. The PDC goes down , can fred login to a machine he has not
used before ?
7) You have been given the responsibility to remove NT server from a number
of machines in your company . all the drives on the machine were FAT although
NT server was running . You are required to remove NT server and "return
them to their previous state
8)What are the rules governing maximum number of characters under windows
NT server ?
9)If your installing multiple windows NT servers which is the most cost effective
licience mode to choose ?
10)you have three separate physical disks
What is the largest possible amount of disk space using a stripe set with parity
11) What types of logs can be managed using windows NT event viewer ?
12) 3 disks 200MB , 300MB , 400MB , What is the largest amount of space
available using a volume set
13)Where in the registry does windows NT store information regarding filename
extension , association and OLE
14)What is the purpose for adding a user to the replicator local group ?
15)If a windows NT client is a member of a domain but has no computer
account in the domain controller , There is no trusted connection bettween the
windows NT client and the domain controller
16) What is the disk partition that allows equal areas of a disk space to be
combined from 2 to 32 physical drives into one logical drive
17) You are considering buying a server for the accounting department to run
windows NT server 4 . What is the first thing you should do
18)You need to reinstall windows NT server on your PDC , What should you do
first
19)What is the main difference between an NT server acting as a domain
controller and a nt server not installed as a domain controller ?
20)NT server wont boot but you urgently need data off the drive (NTFS with file
security) , so you boot from a dos disk and copy the files , does this work
21)Which are parameters for the replicator account
22)FAT system under lock and key, is there anyway to protect the data on the
server using permissions
23)Which group of users is able to run the event viewer application
24) Your RAS server has three modems , RAS clients complain that when they
dial in they are disconnected immediately , how can you diagnose the problem
25) Which statement best discribes the diffenence between a per server and a
per seat licience mode
26) What is the result of the following command : CONVERT D:/FS:NTFS
27)When creating partitions for your windows NT server , the following need to
be considered to ensure sufficient space is alocated
28) You want to send alerts to all the workstations, when you send a alert
manually it dousnt reach the client , what could be the problem
29)Which NOVELL command would you use to create the NT gateway group
on the novell server in order to set up GSNW
30)You want to use the registry editor to make changes to the registry on a
remote computer. What is required before this can happen ?
31)Is it possible to use the fully qualified domain name in a "net use " statement ?
eg net use w: www.microsoft.com/share
32)You want to upgrade NT server 3.51 to server 4 . Your NT 3.5 is installed
into a directory called \\winnt351
33)You have three disks
disk one = boott + system partition
disk two = 2 partitions +- equal insize , partition 1 =FAT , partition 2 = NTFS
disk three = free space
what fault tolenance method would be used ?
34)You wish to prevent a certain group of users from running application located
on their local drive , which tool could you use to prevent the user from choosing
the start , run command
35)What if any is the NT server equivilant permission for the novell file attribute
CI (copy inhibit)
36)In order for a user to set up a UPS , the user must be logged on whilst being
a member of which group or groups ?
37You installed windows NT server on a machine that has OS/2 , after
rebooting you notice the OS/2 boot manager menu isnt dissplaying , what cold
the problem be ?
38)When you run RDISK the following options apply
39)What are the minimum settings required to get TCP/IP going in a routed
enviroment ?
40)You install a UPS and want windows to shut down gracefully before the
UPS's power runs out , how is this done ?
41) All mac volumes must be created on a NTFS partition ?
42)Minimum settings to set TCP/IP to work in a non-routed enviroment ?
IP address
Subnet mask
What is the minimum hardware requirement for disk duplexing?
What is the minimum hardware requirement for a stripe set with parity?
A computer has a SCSI drive with BIOS disabled, which file needs to be on the
ERD?
You add four new 250mb drives to your NT Server. What is the maximum data
storage area available using a stripe set with parity?
Which of the following provide fault tolerance?
The PDC goes down. What will NT Workstations with mandatory user profiles
be allowed to do?
You have a PDC and 2 BDC’s. The PDC is also an application server. You
want to change it’s role to become a Member Server. What must you do?
You suspect that your NT Servers spool file is too big for the drive it is on. How
can you change the location of the printer spool file?
You have NT Server, 10 NT Workstations and 20 Win95 machines. You want
to back up all the files on the NT Server including the registry every night and all
the data files on all workstations every week. What is the minimum hardware
required to do this?
How can you back up the registry?
Using NT Server tools on an NT Workstation machine, what tool would you use
to create a new shared directory on a domain server?
A user is complaining that she can’t access a shared area on the network. You
notice that she doesn’t belong to the group that has permissions to the shared
area. You add her to the group but she still can’t access the share. Why not?
You copy files from on folder to another on an NTFS partition, what happens to
the permissions?
You move files from an NTFS partition to a FAT partition. What happens to the
file permissions and LFN’s?
Using Performance Monitor, you are monitoring numerous resources on multiple
servers and notice that the network is taking a performance hit. What can you
do to fix this problem?
You NT Server is running low on disk space, what could you do to be notified
when the available space falls below a critical level?
You want to monitor performance of 3 NT Servers over a one-week period.
What would you do in Performance Monitor to accommodate this?
You notice that your server’s hard disk is extremely active. You suspect that
you need to increase your RAM. What Performance Monitor object and counter
should you monitor to determine is the drive thrashing is due to a memory
shortage?
You add a new network card and SCSI card, when rebooting the computer you
get a Dependency Failure message. What should you check to help solve the
problem?
How can you speed up name resolution for RAS clients?
Some of your users often copy large documents on your network. What could
you do to reduce the impact on the entire network?
On an NWLink-based network, one of your workstations is not able to establish
a network connection. What is the most likely cause of this?
Your network has multiple Netware clients using different frame types. How
would you configure the NWLink IPX/SPX properties to enable the server to
recognize all clients?
You want to migrate users from a Netware server to an NT 4 server. What
must be installed on the NT server to provide clients with access to the Netware
resources after this migration is complete
You want to limit local logon to all domain controllers to the Administrators
group. How could you do this?
You want to create multiple user accounts with the same group membership and
login times. What is the best way to do this?
You want to install an HP network interface for your printer. During the install,
you are unable to locate the option to install a new port. Why could this be?
You create a shortcut to resources on two different RAS servers. What must
you have in order for the shortcuts to automatically dial into the servers?
Know hardware very well. You need to know
How to regen a Mirror and
Regen a Stripe with parity
1. Your NT server have 5 disks, two partitions each. Currently the server is slow. How to make it fast by reassigning the page file ?
2. You want to know the TCP/IP usage on 5 workstations in a domain by using
3. You want to install Windows 95 over the NT network.(Select 3 answers)
4. What components should be install before migration Novell - NT
5. What is the minimum requirement for disk strip without parity ?
6. Your NT has a disk mirror set. The SCSI controller is SCSI disabled. The primary disk fails. What file should be on the emergency disk ?
7. 1 PDC , some NT workstations, some Windows 95. You want to backup the file , include registry on PDC.
8. What is the minimum requirement for disk strip with partiy ?
9. 4 disks with 250M partition each. What is the total size of usable space
for data.
10. 5 domains connect with RAS each other. The speed is slow. How to
increase the speed ?
11. You install a printer on a NT server. Some Windows 95 users , windows NT
workstation users and NT workstation 3.51 users will use this printer.
1. Your NT server have 5 disks, two partitions each. Currently the server is slow. How to make it fast by reassigning the page file ?
2. You want to know the TCP/IP usage on 5 workstations in a domain by using
3. You want to install Windows 95 over the NT network.(Select 3 answers)
4. What components should be install before migration Novell - NT
5. What is the minimum requirement for disk strip without parity ?
6. Your NT has a disk mirror set. The SCSI controller is SCSI disabled.
The primary disk fails. What file should be on the emergency disk ?
7. 1 PDC , some NT workstations, some Windows 95. You want to backup the
file , include registry on PDC.
8. What is the minimum requirement for disk strip with partiy ?
9. 4 disks with 250M partition each. What is the total size of usable space
for data.
10. 5 domains connect with RAS each other. The speed is slow. How to
increase the speed ?
11. You install a printer on a NT server. Some Windows 95 users , windows NT
workstation users and NT workstation 3.51 users will use this printer.
1.You add another printdevice to the network and you want both print devices to be part of a print pool. What is required so that the print device can be used in a printer pool?
1.You use Admin tools on Windows95 to manage printer security. What should you use on the Windows95 machine to manage printer security?
1.You use Admin tools on Windows95 to manage file permissions. What should you use on the Windows95 machine to manage file permissions?
3.5. You want to modify Alecīs user account so that he can log on to the domain from any Windows NT workstation and recieve his own desktop settings. How should you do that?
1.You want to create a backup of the entire registry of a Windows Nt Server. You want to include the security settings and user accounts. How can you do this while the computer is running?
1.A document stalls in the spooler on your NT Server. What to do to release the document?
1.Your RAS-server has 2 internal modems. Remote users report that they are disconnected directly when they dial in to RAS. How to diagnose this problem?
1.NT Server is infected with boot sector virus to remove virus you erase contents of the boot sector. After you restart the Server, you recieve a message that the operatingsystem cannot be found. How to repair the problem?
You want to migrate the files and user accounts from a NetWare server to a Windows NT Server computer. What do you need to install on the Windows NT Server before you can perform the migration?
Someone wants to do a tape backup only with the registry, what should they do?
Q3. Your Windows NT Server computer has two SCSI hard disks configured
with disk mirroring for the system partition. On the first hard disk, the system
partition is the first partition. On the second (mirrored) hard disk, the system
partition is the sec
Q4. What's the requirement of printer pool?
Q5. Your network is configured as a single domain with three domain controllers
and 28 Windows NT Workstation computers. You have assigned a roaming user
profile to the members of the TELLERS group. It is mandatory. What happens
if the server that holds the profile, gets down ?
Q6. What can you use to create shared directory on remote NT Server
Computer?
Q7. You create a new partition by using Disk administrator. What must you do
before you create the new partition?
Q8. Where on the export server should you place files to be replicated?
Q9. You have installed Gateway Service for NetWare on your Windows NT
Server computer. You want to enable the gateway. What must you create?
Q10. You are manually configuring TCP/IP on a Windows NT Server computer. The server will be used on non-routed network. You have configured the IP address. What else must you configure?
Q11. Your network consists of one Windows NT Server computer and 100 Windows NT Workstation computers. The network uses TCP/IP. The server has two network adapters, each attached to separate LAN segments. You want to configure the server to support ro
Q12. The Clinton and Monica Lewinsky Company has one central location and three remote locations. Each location has one Windows NT Server computer and 39 Windows NT Workstation computers. The workstations at the remote locations use NetBEUI to connect t
A.) At the remote location workstations, set up TCP/IP first and NetBEUI second for the Workstation service.
B.) At the central location, set up TCP/IP first and NetBEUI second for theServer service.
C.) Binding order will not affect the speed of network access.
D.) At the remote locations, set up NetBEUI first and TCP/IP second for theServer service.
E.) At the remote location workstations, set up NetBEUI first and TCP/IP second for the Workstation service.
Q13. You want to allow remote users to choose their own level of password encryption security when configuring their computers to dial into your RAS server. Which setting must you select in the Network Configuration dialog box?
. In order to use TCP/IP performance counters in Performance Monitor, which
of the following protocols you need to pre-install?
Q15. Your network contains one PDC and three member servers. You want
users to be able to log onto the domain in case the PDC fails. How should you
configure the network?
Q16. You wish to improve I/O performance on your Windows NT computer.
You have four physical disks that you would like to combine into one large
logical drive. Fault tolerance is not an issue. Which of the following would
increase the speed of system I
(If the question was about Fault Tolerance, . Remember! Volume Set is not for
performance. However due to its characteristic, it can have the largest disk size)
Q17. How are filenames and permission affected when you copy a directory of
files from NTFS partition to FAT partition? (Choose 2)
1. Users with mandatory roaming profiles.The server is down.
a. Sucessful login, will recieve Default user profile.
b. Succesful login, but changes will be lost.
c. Will not be able to login.
d. user can choose to login to the domain,selecting a user profile from another server.
2. server has a boot sector virus, how do you recover.
b.boot from a floppy and run sys /mbr
c. run rdisk
d.run winnt and select the recovery option
3. remote printer breaks, how do you redirect queue to another print device.
a. delete and reintroduce printer.
b. drag and drop documents to another printer.
c. change the unc path or the printer to another printer device.
4. Disk in a stripe set with parity fails, after replacing the disc how to you recover.
a. select the set, choose a partition on the new disc and regenerate.
5. Document stalled on printer, to relase.
a. delete and create printer
b. reset the print device
c. pause/resume the printer
d. stop/restart spoller service
6. A HD in a mirror set fails, what is the first step.
a. Break the mirror.
b. Create new partition.
c. Create mirror
7. You move files from a NTFS to a FAT partions, what are the effects.
a. The long file names are lost.
b. The long file names are retained.
c. The permissions are lost.
d. the permissions are retained.
9. You have a mirror set with SCI discks with bios enabled and one disk fails.
How do you set the ARC path on the boot disk to point to the mirror on the second
disk.
a. multi(0)disk(0)rdisk(0)partition(0)
b. multi(0)disk(0)rdisk(0)partition(1)
c. multi(0)disk(1)rdisk(0)partition(0)
d. multi(0)disk(1)rdisk(0)partition(1)
e. multi(0)disk(1)rdisk(0)partition(2)
10. RAS Clients immediately disconnect after dial in. Troubleshoot.
a. enable loggng in the registry
11. A user is promoted from sales to a manager, as a result he belongs to both the sales
and the manager groups.he need access to a privdata file.Exibit shows that the
sales group has NO_ACCESS.
a. Remove user from the sales group.
12. Install GSNW on a server, what else do you need to set up.
a. NTGATEWAY account on NT
b. NTGATEWAY group on NT
c. NTGATEWAY Account on NW
d. NTGATEWAY group on NW.
15. Remote user dials in to RAS Server using 3rd party S/W, What is the highest
possible security that can be implimented.
16. RAS server uses a DHCP, what config info is available.
a. Default gateway.
b. FTP.
c. DNS.
d. WINS.
e. Mailserver.
17. 4 disks.User in different partion to system. Users require fastest possible
access to the data, most allow access in event of disk failure.
a. Stripe set with pariry.
18. 2 Servers main1&main2. Tape on main1. backups do not finish until 10am.
need to be finished by 8am. What do you do.
a. 2nd tape on main1.
b. faster/larger tape on main1.
c. new tape on main2, configure Servers to backup to main1 and workstations to main2.
19. how do you create a home directory of Eric on a BDC.
a. User manager for domains, specify UNC path.
b. User manager for domains, specify Domain,server, directory name.
c. NT explorer, create directory with full control for eric.
d. NT explorer, create directory with Take ownership for eric.
20. How do you create a new share on a remote server.
a. User manager.
b. Disk Admin.
c. Servere Manager.
d. NT Explorer.
e. Control panel.
21. Win95 Client with server tools, how to manage remote Printer permission.
22. More files bewteen directorys on the same NTFS partion. what happend to the
permissions.
23. You have added a new disk and created a partion, what next.
a. Save and exit.
b. Format.
c. assign drive letter.
d. Commit changes.
24. 1 Central and three remote locations. remote locations run NetBeui 90% on the time
and
use TCP/IP when access the central resource.Most effective.
a. On remote, bind Netbeui first then TCP on the server service.
b On remote, bind Netbeui first then TCP on the workstation service.
d. On central bind TCP first then Netbeui on the server service.
e. On central bind TCP first then Netbeui on the workstation service.
f. Binding sequence has no effect on performance.
25. Intel installation from CD, fails to detect your non-SCSI CD.
a. restart install and manually specify CD driver.
b. restart and specify scan for system devices.
c. call winnt /s
d. call ntdetect.
26. NT Server with two adapters, to enable routing between the segments.
a. Manually assign different IP addresses.
b. Manually assign the same Ip address.
c. Use DHCP to assign addresses.
27. WT on a non routed network using TCP/IP, What else do you need to define.
a. Default gateway.
b. DNS.
c. Subnet mask.
d. Wins.
28. overworked printer, add an additional printer, users to print to either.
a. Both printers to be attached to the same server.
b. same physical port on the server.
c. different printer name.
29. Files to be exported need to be where
a. \winnt\system32\repl\export
b. in a subdirectory in \winnt\system32\repl\export
c. \winnt\system32\repl\import
d. in a subdirectory \winnt\system32\repl\import.
30. boot partion is FAT, how do you convert to NTFS.
a. Copy files to D: and reformat.
b. change to NTFS using Disk manager.
c. use convert utility.
31. Excessive paging, how to improve performance.
a. Increase pagefile size.
b. Decrease pagefile size.
c. faster processor.
d. add more memory.
32. Excessive paging?, to determine.
a. %pagefile in use.
b. pages/sec
c. Peak pagefile.
33. to monitor disc space, you want to be notified when 25% space.
a. Server manager altering.
b. Performance Monitor, alert on % free space counter.
c. Start diskperf with AT command in scheduler.
34. Add an external SCSI tape.What else, choose all
a. Add SCSI adapter driver
b. Add Tape driver
c. Add Winnt backup program
d. Restart NT
e. Start SCSI from SCSI Adapter interface in Control panel
35. Install NT on DOSC Client over the network from CD shared on CF1
a. Boot DOS using NT installation disc.
b. Create client installation disc for DOS, boot DOS using disk and run winnt from DOS
prompt
c. Boot DOS, Connect to share, run winnt
d. Boot DOS, Connect to share, run winnt32
36. What file is needed on a boot disc for a bios disabled SCSI disk.
a. NTBOOTDD.SYS