Here by the promised questions. I don’t know the exct wording and I don’t remember all the answers.

Reading the braindumps is imperative because the questions come back.

1.You have a network with 2 DNS servers. When you try to connect to the web server you can’t and you suspect that you get incorrect informations from the DNS server. Which tool you can use to verify the problem

NSLOOKUP

 

  1. You have 2 multiple homed computers , each on another subnet . How do you configure the static routing table so that the servers (4 NICS with 4 subnets) can see each other.

I Don’t know the answer. The question was drag and drop. You get to see the image of the servers and underneath you see a row of IP and Gateway adresses that you have to drag to the right place. It was my nightmare and I advise you to learn this.

 

3. You want to set up a network with 10 subnets . Clients are Win 95 and NT. Servers are NT. You want all the servers on one subnet. You install 1DHCP,2 Wins en 2 DNS. What else should you do? Choose 2 ( 2 and 3 )

Install DHCP relay agent

Assign wins IP adress of wins to all clients

Assign IP sdress of DNS to all clients

-------------------------- ( I don’t remember )

 

4.You have a network with 3 subnets. PDC is on the first subnet, BDC on the second, and the worstations on the third. You do not have a Wins server . What do you have to implement so that the clients can see the servers?

 

Lmhost file

5.You have a network with 3 subnets and routers. You have the PDC and BDC on one subnet and workstations on the other 2. There is no Forwarding of Netbios broadcast. The BDC is also DNS. You can not connect to the servers via Network Neighbourhood. What is the problem?

I don’t remember any of the options but I have chozen something with the Lmhost file .

  1. You use Network Monitor to view DNS traffic received by a DNS server. While you capture the data the buffer gets full very quickly. What do you have to do?

Set a capture filter

Set a cpture trigger

Set a display filter ( my choice)

--------------- ( I don’t remember)

7. You installed the network so that users can access it via Internet. Maria tries to connect and she sees that she gets a valid IP from the RAS server but si can not connect to or view any other server. What is the problem.

 

Bad IP Of the Ras server from DNS

 

Some TCPIP users do not have acess to all network ( my choyce)

 

  1. Another drop en drag question. You see at the left side of the screen a pool of choices and at the right side a pool of definitions of the choices. You have to drag and drop the good choice by the right definition

right pool:

Primary DNS

Secobdary DNS

SOC

Cache.dns

Forwarding server

look up for the definitions. This one was really a give away question

  1. You can connect to a server via Explorer but not via Ftp. The question was weird worded.

no acces to the Ftp directories

 

  1. One question about the use of P-node. There is no Wins server and the workstation does not broadcast. Why?
  2. The famous question with required and optionas about the network with Unix computers , nt servers and Nt workstations. Read in the Suresh braindump all the options.

 

  1. Another famous question with required and optionals about Kevin that wants to install an NT server with 4 nIc’s and the server must route TCP/Ip packets. Look it up in another dump ( I think Chilipepper describes all the options).

 

I am empty and tired and sick of exams . Hope to pass the last one before Christmas. We shall see !

Sorry for my english ( not my native language) . I have no time to review the language mistakes because I have to go.

Pray for Robert’s health to keep this site alive.

 

Cristina