Subject: 70-067 Windows NT Server 4.0

Passing Score: 764
Your Score: 981
Type: As of Oct 30, 1998 still standard. Hope it does not change to adaptive. (much harder)

Section Analysis
 
 

Planning 100%
Installation and Configuration 100%
Managing Resources 90%
Connectivity 100%
Monitoring and Optimization 100%
Troubleshooting 100%

Just passed Windows NT Server 4.0 today with a flying score of 981 which means I only got one wrong. A big thanks to this site and everybody who contributed. The amount of material for this test in this site is tremendous. So much so that every question I got in the test can be found in this site. I think I was really lucky because all the questions I got was short and had straight forward answer. None of them was sophisticated or had the answer twisted as to confuse you. Interestingly I took Windows NT Workstation on the same day and found they had changed that into Adaptive which is harder. I spent the same amount of time on Worstation and only got 734. I really believe if it was not adaptive I would be in the 900 range because I spend more time on that then in the server. So be extra careful on those adaptive test. I can really make your life miserablre.  I don't know if they are going to change the Server to adaptive but so far I found out the Server and the Enterprise is still standard. Adaptive is certainly harder than standard. Ok on to my dump. I used other dumps to help me reconstruct my memory. They are not in any particular order.

1. After you log in, you get a message that a dependency service  failed where do you look to find out more.

A: Event viewer

2. Installing audio with midi, what applet do you use?

A. Multimedia, in control panel.

3. Two ways to change password with NetWare 4.x?

A. Setpass.exe and cntrl+alt+del

4. You get blank pages after job when printing on NetWare printer, How fix?

A. CSNW and clear the add form feed box.

5. How install UPS on system, Choose two.

A. Plug it to serial port and configure in control panel, UPS. (Remember NT 4.0 IS NOT Plug and pray).

6. How lock workstation when leave?

A. Screensaver with password.

7. 3 Users don't get system policy working on their computers, why?

A. User policy is overriding system policy.

8. Can you dial in to a RAS using 3 modems (Multilink) and callback?

A. No, Callback doesn't work with multilink.

9. A tool to search for a value in the registry?

A. Regedit

10. How move workstation from one domain to another?

A. Control panel | Network | Identification.

11. What to do about excessive paging?

A. Add more RAM.

12. Installing NT Workstation and will add network card later but want to configure network protocols now, how do you
this?

A. Use the MS Loopback adapter and bind protocols to it.

13. Want to install NT Workstation from CDROM and NT Doesn't support CDROM, but DOS does. How do this?

A. Start from MS-DOS and run Winnt.exe from CDROM.

14. You have 1 controller, 3 drives total with 1 partition per Drive, one Drive has NT Server boot and system files. What is
the best method of fault tolerance?

A. Mirror, You don't have enough drives to make a Stripe set.

15. Upgrade from WinNT 3.51 to NT 4.0 Select all that are correct.

A. Boot using 3 install diskettes, Boot to WinNT3.51 and run winnt32.exe.

20. The infamous mandatory logon if the PDC is down.

A. Answer that the user CANNOT log on.

21. The minimum requirements for stripe w/parity?

A. One controller and 3 disks.

22. Minimum requirements for disk duplexing?.

A. 2 Controllers and 2 disks.

23. You are Administrating from Win95 Computer. You install Server Admin. Tools. Want to share CD-ROM on NT
Computer. What do you use on Win95 Computer?.

A. Server Manager.

24. You have 4 drives w/250 MB on each disk. Want to use RAID 5. What is the total usable size of stripe set?.

A. 750 MB.

25. Want to monitor when disk space is less than 25% how do you do that?

A. Performance monitor. Alert on %of free space on all disks.

26. You have 3 NT Servers. Want to change role of PDC to be a Member Server and one of the other 2 BDC to PDC. How
do you do this using Net Admin Tool?

A. Server manager to promote a BDC to PDC. Reinstall NT in to the old PDC and select to be a member server.

27. You have 3 NT Servers. Want to change role of PDC to BDC.

A. Use Server Manager to promote a BDC to PDC, Existing PDC will be automatically demoted.

28. Scenario Question: If you're ever asked how will auditing be performed just answer:

A. Any attempts to make changes to an existing file in e:\corp directory will be audited.

29. What file do you need on a boot disk for SCSI controller w/bios DisableD ??

A. NTBOOTDD.sys

30. You want to prevent anyone except ADMIN group from logging onto a Domain Controller LOCALLY. What do you do?.

A. Ensure that only ADMIN group can login locally.

31. You want to backup 1 NT Server's registry daily and 95 WS weekly. What are the minimum requirements needed to
perform this task?

A. 1 Tape backup on the server.

32. You have NT Server and NWLink client both using IPX. What can Netware clients access?

A. Client server apps. That support NetBIOS.

33. If you move a file from NTFS partition to a FAT partition, what happens?

A. They preserve long filenames but LOSE the permissions. FAT doesn't have file level security.

34. If you have a problem with de Video card, what you should do?

A. Restart in the VGA mode an change video drivers in Control panel | Video Adapters.

35. You want to use template for setting up users. How do you that?

A. Make a Template_user and set the properties for it. When you want a new user, simply select the template and copy to new
account.

36. You have 3 server w/RAS installed on three different segments. How do you minimize time to resolve NetBIOS names?

A. Install LMHOST file on each WS.

37. When you have 2 computers running IPX and they can't communicate, the correct answer is:

A. Incorrect Frame Type.

38. Have a network using various types of frames, what do you have to do?

A. Manually enter each frame type used, and install NWLink if it is not mentioned.

39. You have a RAS Server and they give you an exhibit on what it and the dial in computers have. Just remember.

A. You can use Winsock (Because both have TCP/IP), You can use NetBEUI (Both have it), You can use RAS Services.

40. Your page file has increased above its maximum allowed. What will happen? (Choose two) (A,C)

A. Apps will open and run slow, Disk will be fragmented.

41. You are using Performance Monitor from a WS. You're monitoring 10 servers. Performance is slow in your WS. What to
do? (d).

A. Increase time interval you collect data.

42. 84. Your 95 clients access shared resources on NT Server. The 95 Computers have Client for MS installed. You want to
allow 95 clients to access files on NetWare Server. You Install GSNW on NT Server. What else do you need to do?

A. From GSNW applet in control panel, use the Gateway option to share desired directories on Netware Server.

43. Migrating from NetWare server to NT. What needs to be installed on NT Server?

A. GSNW.

44. You want to monitor TCP/IP counter on servers. What do you need to install on each server?

A. SNMP.

45. What utility would you use to view roles of all computers on network?

A. Server manager.

46. You have four domain controllers, and want your administrators to receive alerts when system errors occur. How do you
do that?

A. On each server, add names of all administrators to alert list in Server Manager.

47. You're concerned about disk space on your servers, you want to be notified if falls below 25% How do you do that?

A. On each server, use Performance monitor, set an alert on in if it falls below 25%.

48. What would you use to minimize memory usage for a domain with less than 10 users?

A. Server Service in Control panel | Network.

49. You have a 20 user workgroup called SALES. You want to install a PDC and call the domain SALES. How?

A. Create accounts for the computers on the PDC using server manager. At the workstations, Network icon. - Add to domain.

50. You want to segment your network by installing a second NIC on your server. How do you configure it?

A. Manually assign unique IP Address to each NIC. (Incorrect choices include manually assign identical IP's Or use DHCP to
assign unique/identical IP's).

51. You have a NetWare network, and install a new NT Server to run a client/server app. What must be installed on the NT
Server to allow NW clients access?

A. NWLink ONLY.

52. You want to back up the registry on server. How?

A. Select at least one file on the volume containing the registry.

53. In a NON-ROUTED network with static IP addressing, what else do you need?

A. Subnet Mask (Not default gateway because it is NON-ROUTED).

54. Scenario: You have RAS Dialup, some users need to access a database program over network, others do not. You want
to encrypt database information. Mix of MS Clients and 3rd party dialups. How do you maintain security?

A. Use different modem ports, configure clients who need to access the database to use the port set up with port with data
encryption.

55. Lack of disk space for spool file, how to fix?

A. In server properties, choose a new path for the spool file on a Disk that has more space.

Ok. That is all the questions I have. As you see. I was lucky not to have any long scenario question. Final hint. Look for the braindump by made by axel. All the question I got from the  test was covered in that braindump which is a summary of many braindumps. Good luck and hope the Enterprise test don't become adaptive because I am onto that next. Half MCSE now. 3 down 3 to got. Hope this will be done by end of year. Cya!