Some of the questions already appeared in recent braindumps. The wordings may not be exact but the essence is there.

 

Q1. You have 3 NT servers. Want to change the role of BDC to PDC. What to use?

 

Q2. Exhibit gives E:\Corp Service directory with ‘replace auditing on existing files’ box checked.

Success Fail

Write yes yes

Change Permission yes no

 

What would be audited. You’re given a few choices.

 

 

Q3. Files moved from NTFS to FAT partition. What would be kept?

 

Q4. Copy files from 1 subdirec to another in same NTFS partition. What changes?

 

Q5. How to create multiple users with similar properties e.g groups, logon hours etc.

Q6. How do you identify the role of a computer?

 

Q7. Want to only allow administrator group to logon domain only, how?

 

Q8. A domain has 3 DCs, use mandatory roaming profile. Server storing profiles down. Can users logon?

 

Q9. Install Client-based admin tools. Want to share CDROM. What tool to use? 

Q10. Want to configure domain so that users can logon wherever.

 Q11. Server has 5 HDs, 2 partitions each. How to configure paging file for optimal performance?

Q12. Want to be notified when <25% of HD space occurs on 5 servers. 

Q13. You monitor 10 servers. Perf poor. (It seems every gets this Q!)

 Q14. You notice accessive paging on your server. How?

 Q15. Single domain, 3 servers, want to analyse perf for 1 week. How?

 Q16. Suspect accessive paging from lack of memory. Which activity should

 Q17. Paging beyond initial paging size. What would happen?

 Q18. Want to view TCP/IP activities on 3 servers. What to install?

 Q19. Use Network Client Admin to install Win95 on a new computer. How? (Choose 3)

 Q20. 3 NT servers, 1 of which is called Research1, 100 W/S. N/W configured as 1 subnet. TCP/IP used by all PCs. The Research Dept often do a 100Mb file transfer & slow down the n/w. How to solve this?

 Q21. New PC has 3 HDs. Windows NT is on partition C. Want to implement fault tolerance & be able to function even if 1 HD fails. How?

 Q22. Single domain. 1 PDC, 2 BDCs. Want to configure PDC as apps server. How?

 Q23. Stripe set with parity. 4 HDs each 250Mb. How much space for data? 

Q24. Want to upgrade Win 3.51 to Win 4.0 & preserver all existing settings. (Choose all that apply)

Q25. Moving 10 W/S from another office to join main office. What to do? 

Q26. Manually configure TCP/IP on non-routed n/w. What other parameter is required apart from IP address?

Q27. SCSI HDD without BIOS enabled. What file do you need to include on boot disk?

Q28. N/W uses NWLink. ½ uses 802.2. ½ uses 802.3. You add an NT server with only 1 NIC to the existing n/w. How to configure NT server?

Q29. You want to repair NT server but don’t have NT setup disks. How?

 Q30. Win NT 3.51 & Win NT 4.0 print servers. How to install printer drivers?

 Q31. N/W has 5 PCs located on 3 different subnets. Users of remote NT W/S use Dial Up networking to connect to n/w. You want to improve performance?

 Q32. ARC naming. Disk 0 System Data Data

Disk 1 Data system(mirrored) Data

  Disk 0 failed. How do you modify ARC naming in BOOT.INI file to point to correct partition.

 

Q33. Win95 clients access shared resources on NT server. Win95 clients use Client for MS n/w. Want them to access files on a Netware server. You installed GSNW on NT server. How to let clients access shared direc on Netware server?

 Q34. Configure NT server with NWLink. Which resources on this server can be accessed by a user from a Netware n/w?

Q35. NW 3.x server to be moved. HQ has NT server & 60 Win95 clients. What do you need?

 Q36. RAS server is configured as shown in Exhibit.

 

Dial Out protocols: NETBEUI, TCP/IP, IPX. Server settings: NETBEUI, TCP/IP

 Users of Win NT W/S can do what? 

Q37. 3 N/Ws in separate locations. Administer by dialing in. Want to use autodial feature to auto connect to each RAS server, based on UNC & DNS name of a remote resource on the server. How?

 Q38. Migrate files & user a/cs from Netware to NT. What to install on NT?

 Q39. Min requirement for stripe set with parity?

 Q40. 2 Netware servers, 30 MS-DOS PCs & Win 3.1 PCs. All use Netware client. Want to add NT server. What is neededon NT server?

 Q41. Min requirement for disk duplexing?

 Q42. NT server, 10 Win95, 5 NT W/S. Want to backup NT server & registry daily, and Win95 & NT W/S weekly. How?

 Q43. Fault tolerance methods. What are they?

Q44. Shared a folder but user still can’t access.

 Q45. Configure stripe set WITHOUT parity. 1 HD failed. How?

Q46. This is a long & convoluted question on RAS. You have NT W/S clients dialing in to access a database on an NT server via a RAS server. You also have clients using 3rd party software which does not support encryption, to dial in to access apps. Now, the database server is setup only to allow encrypted authentication. How do you configure your RAS server to allow both types of clients to access your network via RAS?

 

Good Luck to all, from Dick, from the Land of Down Under.