-----Original Message-----

From: [email protected]

Sent: Friday, October 30, 1998 1:28 PM

To: BrainDump Heaven Webmaster

Subject: BrainDump Submission: Windows NT4 #70-67

Hi all

I wrote NT Server the end of October 98, but wasn't nearly prepared for it.

I

had a breakfast meating in a Hotel

that morning, and started learning for the exam only three days before the

exam.

So by the time I got to the centre,

I was on page 200 of 465! I raced through the last few pages, but could not

take

in much. Then I grabbed this page

with all these questions. It helped - A LOT! All my questions came either

directly, or VERY

close related from thoses given below, if only I paid more attention. I had

less

than an hour to go through

EVERYTHING listed here, and remember it all!

I was sure to plunge, but this page saved me - I got 782 of a minimum of

764!!

Just to prove that sometimes the impossible CAN be accomplished...

Go through this page! It WILL HELP. But they can change the wording - be

careful.

It's the most up-to-date info (October 98).

PLEASE CHECK ANSWERS - THEY COULD BE WRONG!!!

Good Luck

1. User needs to view security logs in the Event Viewer.

A. Add to the administrator Group.

2. Installing audio with midi, what applet do you use?

A. Multimedia, in control panel.

3. You have a 386 computer with NT 3.51, and you need to upgrade to NT 4.0,

How

can you do it?

A. Can't do, You need at least 486/33 Mhz to run NT4.0

1 4. A user is member of Webmasters group. Webmasters has change permission

on

share and full control on NTFS. What's user rights to shared folder over

network?

A. Change.

5. A chart showing share and NTFS permissions. There's Read on share and

Full

Control on NTFS. Pick 2 showing users permissions:

A. Local Users have full control to the directory.

A. Remote users have read permission to the directory.

6. You installed a network card and now can't reboot NT. What do you do?

A. Use last known Good.

7. What do you need to automated install?

A. unattend.txt, sysdiff, UDF

8. Two ways to change password with NetWare 4.x?

A. Setpass.exe and cntrl+alt+del.

9. You get blank pages after job when printing on NetWare printer, How fix?

A. CSNW and clear the add form feed box.

10. How install UPS on system, Choose two.

A. Plug it to serial port and configure in control panel, UPS. (Remember NT

4.0

IS NOT Plug and pray).

11. How lock workstation when leave?

A. Screensaver with password.

12. How map a Drive to a folder on the Internet?

A. \\sales.core.com\public

13. How upgrade OS/2 Computer with HPFS to NT?

A. Convert to NTFS, then install NT.

14. How prevent users from shutting down system when log in?

A. Use system policy.

15. 3 Users don't get system policy working on their computers, why?

A. User policy is overriding system policy.

16. How to change NT computer back to MS-DOS only?

A. Run sys.com and then remove NT Files.

17. How print large print jobs after hours?

A. Set up 2 printers and set up one with hours only after business hours

and

tell users to print large jobs to that printer.

18. How to configure RAS with 2 ISDN adapters and 2 Phone numbers on each?

A. One phonebook entry with 4 phone numbers.

19. RAS not connecting after 3 seconds, how do you troubleshoot?

A. Open Dial Up Network Monitor before dialing.

@@ My option - set devicelog in registry... could be wrong?

20. Can you dial in to a RAS using 3 modems (Multilink) and callback?

A. No, Callback doesn't work with multilink.

21. What protocol to use to print to a MAC printer?

A. AppleTalk.

22. Smallest unit handled by Scheduler?

A. Process.

23. Two utilities to monitor memory utilization?

A. Task Manager and Performance Monitor.

24. A tool to search for a value in the registry?

A. Regedit

25. User wants to share a folder on his workstation, how do this?

A. Log in workstation as administrator and share using explorer.

3 @@ Used other wording, same principal! Know terms Domain and

Workstation!!!

26. How can a workstation join a domain during installation?

A. Must have an administrator name and password of DOMAIN CONTROLLER.

27. What is required to automate TCP/IP address?

A. DHCP.

28. You forget administrator password and restore using ERD. What happens?

A. The accounts are restored as was on the date ERD was made.

29. You have 4 win 16 apps need to share memory and one is crashing. How is

the

best way to do it?

A. Run 4 in the default VDM and other on their own VDM.

30. How move workstation from one domain to another?

A. Control panel | Network | Identification.

31. How add path to user environment?

A. Control panel | System | Environment | User Variables.

4 32. What to do about excessive paging?

A. Add more RAM.

33. Startup fails, suspect problem with boot files. How fix?

A. Boot from startup disk and choose repair.

34. Enable auditing for printing and see nothing in log. How fix?.

A. In User Manager, enable auditing of file and object access.

35. Wish to install FTP on a WS. What else must you install?

A. PWS (Peer Web Services).

5 @@ Keep same settings - same directory!

36. Wish to install NT 4.0 on a computer and keep NT 3.51. How do?

A. Install on different directory.

6 37. What do you need for TCP/IP to work in routed environment?

A. IP Address, subnet mask, Default Gateway.

38. A user wants to connect to resources on 3.x NetWare server called

"Accounting". What do you configure in CSNW?

A. Preferred server "Accounting" .

39. Want to automate connecting to ISP who uses PPP. How do?

A. Create a Login script to be run after dialing.

40. Have 3 users who use computer on different shifts and need to secure

files

and want their own desktop, etc. How do this (Choose 3).

A. Set Up user account for each, Set permissions exclusive for each other,

create different profiles.

41. Where do Win 16 Apps run on NT?

A. On a VDM (Virtual Dos Machine).

42. Want to run accounting application at higher priority without

interfering

with operating system. What priority class should use?

A. High.

43. Installing NT Workstation and will add network card later but want to

configure network protocols now, how do you this?

A. Use the MS Loopback adapter and bind protocols to it.

44. Computer with 4 disks of 2 GB. Each. Required: Speed Up data access.

Proposed solution is to set up a volume set.

A. Doesn't meet any. Volume set do not speed up data access, need stripe

set.

45. Scenario question: 2 types of hardware, need to automate install of NT

and

applications. Give complicated proposed solution involving system.inf,

sysdiff,

UDF and unnatend.txt. Its not clear, because they don't mention how many

unattend.txt are.

A. Don't meet the required.

7 @@ Something about adding printer on NT4.0 server, must also be available

to

3.51. Any changes?

O. Do nothing - NT 3.51 uses same driver

O. Install all drivers for all types of OS's

Think last option is best...

46. Creating printer on NT WS. What is easiest way to make drivers

available

for Win 3.1, Win NT, and Win95 workstations?

A. Install all that drivers in the WS that have the printer.

8 47. Scenario question showing a graphic where assistant local group with

No

access, Everyone group with Special Access and user with Read access.

User is member of assistant group. What are his rights?

A. No access, that overrides all others.

48. User is leaving company. His NT WS has files and directories with

different

permission set. New user needs same access on his machine. How best

accomplish

this?

A. Rename his account and change his password and have new user use this

account.

9 49. How move NT WS to another domain?

A. Control panel | Network | Change

50. What is SYSDIFF used for?

A. Automated application installation.

10 51. Want to install NT Workstation from CDROM and NT Doesn't support

CDROM,

but DOS does. How do this?

A. Start from MS-DOS and run Winnt.exe from CDROM.

52. How do you disable the shutdown button in the login dialog box?

A. Change the setting in system policy.

11 53. You have 1 controller, 3 drives total with 1 partition per Drive, one

Drive has NT Server boot and system files. What is the best method of fault

tolerance?

A. Mirror, You don't have enough drives to make a Stripe set.

12 54. What do you do with the page file to optimize it? You have multiple

disks

and partitions.

A. Move the page file off the boot and system partition.

13 55. Upgrade from WinNT 3.51 to NT 4.0 Select all that are correct.

A. Boot using 3 install diskettes, Boot to WinNT3.51 and run winnt32.exe.

14 56. The infamous mandatory logon and de PDC is down.

A. Answer that the user CANNOT log on. That is.

15 57. The minimum requirements for stripe w/parity?

A. ONE controller and 3 disks.

16 58. Minimum requirements for disk duplexing?.

A. 2 Controllers and 2 disks.

17 59. You are Administrating from Win95 Computer. You install Server Admin.

Tools. Want to share CD-ROM on NT Computer. What do you use on Win95

Computer?.

A. Server Manager.

*** Please - NOT Windows Explorer

18 60. You have 4 drives w/250 MB on each disk. Want to use RAID 5. What is

the

total usable size of stripe set?.

A. 750 MB.

19 61. Want to monitor when disk space is less than 25% how do you do that?

A. Performance monitor. Alert on %of free space on all disks.

20 62. Scenario question: You have a Workgroup called SUPPORT with lots of

clients (NTWS) you install an NT Server acting like PDC and create domain

name

SUPPORT. What else you need to do?

A. Create user accounts w/server manager, add WS to domain, setup

permissions.

21 63. The RAS Server has two internal modems. People complain they are

being

disconnected when attempting to dial in. How do you diagnose this problem?

A. Modemlog.txt and Devicelog.log (Enable through registry).

22 64. You have 3 NT Servers. Want to change role of PDC to be a Member

Server

and one of the other 2 BDC to PDC. How do you do this using Net Admin Tool?

^ A. SERVER MANAGER to PROMOTE a BDC to PDC. Reinstall NT in to the old PDC

and

select to be a member server.

|

22 65. You have 3 NT Servers. Want to change role of PDC to BDC.

A. Use Server Manager to promote a BDC to PDC, Existing PDC will be

automatically demoted.

23 66. Scenario Question: If you're ever asked how will auditing be

performed

just answer:

A. Any attempts to make CHANGES to an existing file in e:\corp directory

will

be audited.

24 67. What file do you need on a boot disk for SCSI controller w/bios

DisableD

??

A. NTBOOTDD.sys

25 68. You want to prevent anyone except ADMIN group from logging onto a

Domain

Controller LOCALLY. What do you do?.

A. Ensure that only ADMIN group can login locally.

26 69. You have single domain w/2 member servers, NT WS, Win95, PDC, 2BDC.

It

gives you and exhibit to show how DRS is set up. Just remember:

A. Only NT Servers can be EXPORT Servers. ALL OTHERS (Win95 also) can be

Import

computers. (Including some NetWare).

27 70. You want to backup 1 NT Server's registry daily and 95 WS weekly.

What

are the minimum requirements needed to perform this task?

A. 1 Tape backup on the server.

28 71. You have NT Server and NWLink client both using IPX. What can Netware

clients access?

(all shared directories / all shared printers - note this isn't right!!)

A. Client server apps. That support NetBIOS.

29 72. If you move a file from a subdirectory to another in the SAME NTFS

partition, what happens to rights?.

A. In the same partition, they keep original rights.

30 73. If you move a file from NTFS partition to a FAT partition, what

happens?

A. They preserve long filenames but LOSE the permissions. FAT doesn't have

file

level security.

31 74. If you have a problem with de Video card, what you should do?

A. Restart in the VGA mode an change video drivers in Control panel | Video

Adapters.

32 75. You have a computer with 5 disks. Each have 2 partitions. How do you

optimize Page File?

A. Place page file equally on the four PHYSICAL disks not containing the

boot

partition.

33 76. You want to use template for setting up users. How do you that?

A. Make a Template_user and set the properties for it. When you want a new

user, simply select the template and copy to new account.

34 77. You have 3 server w/RAS installed on three different segments. How do

you

minimize time to resolve NetBIOS names?

A. Install LMHOST file on each WS.

* 78. When you have 2 computers running IPX and they can't communicate, the

correct answer is:

A. Incorrect Frame Type.

35 79. Have a network using various types of frames, what do you have to do?

A. Manually enter each frame type used, and install NWLink if it is not

mentioned.

36 80. You have a RAS Server and they give you an exhibit on what it and the

dial in computers have. Just remember.

A. You can use Winsock (Because both have TCP/IP), You can use NetBEUI

(Both

have it), You can use RAS Services.

37 81. You want to install NT 4 over NT3.51 but you want to preserve

permissions

and so on.

A. Install on the same directory.

38 82. Your page file has increased above its maximum allowed. What will

happen?

(Choose two) (A,C)

A. Apps will open and run slow, Disk will be fragmented.

39 83. You are using Performance Monitor from a WS. You're monitoring 10

servers. Performance is slow in your WS. What to do? (d).

A. Increase time interval you collect data.

40 84. Your 95 clients access shared resources on NT Server. The 95

Computers

have Client for MS installed. You want to allow 95 clients to access files

on

NetWare Server. You Install GSNW on NT Server. What else do you need to do?

A. From GSNW applet in control panel, use the Gateway option to share

desired

directories on NT Server.

41 85. You have 95 clients using 3rd. Party PPP that only supports DES. Want

to

provide highest level of security, what do you do?

A. Require Encrypted authentication.

86. Scenario: Exhibit showing groups a user belongs to an NTFS permissions

for

those groups on a directory. The question is: User cannot access directory.

Why?

A. One group user belonged to had No Access. No access ALWAYS overrides all

other permissions.

42 87. Migrating from NetWare server to NT. What needs to be installed on NT

Server?

A. GSNW.

88. Want to send administrative alert. What to use?

A. Server Manager.

43 89. You want to monitor TCP/IP counter on servers. What do you need to

install on each SERVER?

A. SNMP on the SERVER's!

90. You have installed Administration Tools on a 95 computer. How to manage

printer permissions?

A. Using Explorer. (Remember; Explorer is for file and printer permissions.

Server manager is used to administer shares)

91. The printer on the network fail, how do you redirect the printing jobs?

A. In port of failed printer, specify UNC path to another printer.

44 92. A Disk in a mirror set has failed. Drive has been replaced. What is

the

first thing you need to do?

A. Break mirror set.

93. Drive in a stripe set w/parity has failed. Drive has been replaced.

What do

you need to do next?

A. Choose regenerate from Fault tolerance menu.

45 94. What utility would you use to view ROLES of all computers on network?

(options like Network utility in Control Panel, Client Administrator)

A. Server manager.

95. You have four domain controllers, and want your administrators to

receive

alerts when system errors occur. How do you do that?

A. On each server, add names of all administrators to alert list in Server

Manager.

97. What would you use to minimize memory usage for a domain with less than

10

users?

A. Server Service in Control panel | Network.

98. You have a 20 user workgroup called SALES. You want to install a PDC

and

call the domain SALES. How?

A. Create accounts for the computers on the PDC using server manager. At

the

workstations, Network icon. - Add to domain.

46 99. To create a printer pool, all printers in pool must:

A. Use the same drivers.

47 100. You want to segment your network by installing a second NIC on your

server. How do you configure it?

A. Manually assign unique IP Address to each NIC. (Incorrect choices

include

manually assign identical IP's Or use DHCP to assign unique/identical IP's).

101. You have installed GSNW on your server. What's next?

A. Create a group called NTGATEWAY on the NetWare server. (Incorrect

choices

include creating ntgateway account on NT Server, create ntgateway user

account

on netware server).

102. Your network uses NWLink/IPX on server and clients. One client cannot

connect. Why?

A. Incorrect frame type.

103. You have a NetWare network, and install a new NT Server to run a

client/server app. What must be installed on the NT Server to allow NW

clients

access?

A. NWLink ONLY.

104. Remote users dial into RAS to access a program requiring Winsock. All

servers and workstations have NetBEUI and TCP/IP. DUN is installed on the

WS.

How to configure?

A. Select how IP Address will be assigned from the WS. (Incorrect choices

included configure SLIP with TCP/IP, Configure PPP w/NetBEUI, install

Winsock

from media).

48 105. You want to back up the registry on server. How?

A. Select at least one file on the volume containing the registry.

49 106. In a NON-ROUTED network with static IP addressing, what else do you

need?

A. Subnet Mask (Not default gateway because it is NON-ROUTED).

36! 107. Scenario: Exhibit shows RAS outbound: TCP/IP, IPX, NetBEUI.

Inbound:

TCP/IP and NetBEUI. What can the dial-in client access?

A. Winsock (Because there's TCP/IP), NetBIOS, Shared resources on RAS

server,

NOT IPX!

50 108. You need to remotely administer 3 server using RAS. How do you do

that?

A. You must set up phone book entries for each location.

51 109. Scenario: You have RAS Dialup, some users need to access a database

program over network, others do not. You want to encrypt database

information.

Mix of MS Clients and 3rd party dialups. How do you maintain security?

A. Use different modem ports, configure clients who need to access the

database

to use the port set up with port with data encryption.

52 110. Scenario showing a stripe set, one member fails. How to restore?

A. From tape backup (Since they no mention "with parity").

53 111. Lack of disk space for spool file, how to fix?

A. In SERVER PROPPERTIES, choose a new path for the spool file on a Disk

that

has more space.

112. Scenario showing a failed primary member. How do you recover?

A. Format a floppy in NT, copy ntdetect, ntldr, boot.ini, (ntbootdd.sys if

it

is a SCSI with bios disabled); edit boot.ini ARC name to point to system

files

on mirror.

113. A virus has corrupted your boot sector. How do you repair?

A. From DOS, run winnt.exe from de CD. (Incorrect options include: Dos

setup,

dos winnt32.exe).

114. How do you promote a BDC to PDC remotely on a client running Client

Tools?

A. Server Manager.

54 115. How do you ensure that logon scripts are the same on all domain

controllers?

A. Use the DRS (Directory Replicator Service)

55 116. Which method provide fault tolerance?

A. Mirror, Stripe set With parity.

* 117. In Performance Monitor, you want to watch trend for a week, what do

you

use?

A. Choose log file. (Not alert log or report view).

118. Scenario: You have RAS, how to administer 3 servers using Autodial? A.

Create separate phonebook entries.

119. You can see an HP Printer, what's wrong?

A. Install DLC.

120. You have installed GSNW on your NT Server, and have a NetWare server.

How

do you allow Win95 Clients to access the NW Server?

A. From GSNW in the control panel, use the Gateway option to share the

desired

directory on the NW Server.

121. What you do to create the three NT Setup disks?

A. From an MS-DOS station run winnt.exe from the NT Server CD (With the /ox

option).

122. Minimum NT Server requirements for a NetWare client to access a

NetBIOS

compatible Client Server application on the NT Server?

A. NWLink compatible protocol.

123. Scenario: You have a group of users who need to copy 100 MB files to

an NT

Server and then network slows down, what you should do?

A. Install second NIC and enable IP routing. (Beware: This question has a

lot

of irrelevant info).

124. Scenario: You have a Network configuration for RAS. You let the user

choose their own method of authentication.

A. The answer is "Any authentication, including clear text".

125. How to convert Drive C which contains Windows NT Workstation which is

FAT

to NTFS.

A. Use Convert.ext

126. You have a HP LaserJet printer on a UNIX Computer, wich you wish to

print

to via your NT Server. What protocol do you install?

A. TCP/IP (Not DLC, since you're printing to a computer, not a network

printer).

127. NT Server connected to UNIX, want to use HP Printer connected to UNIX

Computer, NT Clients will be running NWLink. What other protocols need to be

running?

A. Just TCP/IP and IPX.

128. NetWare users need to access an SQL database on an NT Server, what

must

you do to set up this function?

A. You need only IPX/SPX compatible protocol installed on NT Server.

129. How do you make an ERD (Emergency Repair Disk)?

A. Use RDISK.exe

130. How can you minimize memory usage when there are less than 10 users

connected to a NT Server?

A. Use "Server Service" (other wrong choices include: User manager, WS

Service,

Foreground app. Priority).

131. You connect a new HP LaserJet to a printer pool, but the HP Port

option

does not show up in print manager. What could be wrong?

A. DLC is not installed.

132. You suspect excessive paging on the server. What to monitor?

A. Pages/sec. (Wrong choices include: Disk activity, Paging file use,

etc).

133. How would you install Windows95 over a network?

A. Share Win95 installation files on server, Make installation disk set

with

Network Client Administrator, Install using installation startup disk.

134. You have a Windows95 Computer with client administration for NT

installed

and a Win NT Server (Assuming you have a NetWare server too), you want the

computer to be able to connect to a NetWare Server. How do you do that?

A. Install GSNW on NT Server.

135. Scenario: You have 30 MS-DOS machines, 20 WFW machines and 1 NT Server

machine. You want the MS-DOS and WFW machines to be able to connect to 2

NetWare

servers. What is required on the NT Server?

A. NWLink and GSNW.

136. You create home directories for 2 users on NT Server. User 1 on NTWS

and

User 2 on WFW. After they both log on, User1 has access to her directory,

but

User 2 cannot access his directory. What do you do?

A. Map a Drive on Users 2 WFW computer to her home directory on the server.

137. Scenario: The RESEARCH directory is located on an NTFS partition.

Permissions for the RESEARCH directory are Change for the Engineering group,

Add

and Read for the SALES group, and No Access for the Marketing group. Sonya

is a

member of the Engineering, marketing and Sales groups. Why cannot Sonya

access

the RESEARCH directory?

A. The marketing group has NO ACCESS. And it overrides all other

permissions.

138. How do you promote a member server to a BDC?

A. Reinstall Win NT.

139. You have 3 servers and 100 workstations all running NT. One of the

tree

servers is used to copy very large files back and forth between some of the

workstations. When the copying was being done between the server and the

workstations it slowed down the other workstations and servers on the

network.

What is the best solution to fix this?

A. Implement TCP/IP and separate the network into subnets.

140. Which program would you use to grant dial-in permissions to a user you

want to access RAS?

A. User Manager -or- RAS Administrator.

141. Your computer running Windows NT Server runs TCP/IP as its primary

protocol. The server also has NWLink installed, for the sole purpose of

hosting

connections from NetWare clients. How would you optimize the bindings for

this

server?

A. Disable the binding between the Workstation Service and NWLink, because

the

server never need to establish connections or authenticate users over

NWLink.

142. How do you notify a user when his/her print job is done?

A. Alerter/Messenger service must be running on the NT client (Winpopup

must be

running on win95 or WFW box). Server that is serving the printing services

for

that printer must be setup to provide notification.

143. Where do the policy files go? In the Ntroot\netlogon or in the users'

home

directory?

A. In the NETLOGON share.

144. Domain A trust Domain B. You want a user of Domain B to access a

resource

on a Server in Domain A. How would you do this by creating only one account?

A. Make a local account on that server, add user to it.

145. What is the difference between the print spooler and router?

A. Only difference is where they reside.

146. If you want to enable TCP/IP Dial-up, where do you install RAS?

A. On the server.

147. When printing from an Intel to a RISC, where do the drivers need to

be?

A. On the Server.

148. What do you need to do if you want to print using TCP/IP from LPD? A.

The

IP Address.

149. How does Gateway Services for NetWare do what it does between a NT

workstation and a NetWare server?

A. The gateway translated a SMB packet received into a NCP packet over IPX

(And

back again too).

150. You have 2 domains, guest account is disabled on both, Domain A and

B. Want all users in both domains to have access to a resource in Domain

A. What 2 steps do you have to perform. Want only one group to manage?

A. Have Domain A trust Domain B, Create local group on A.

151. Susan is an administrator in Domain A. Domain B trust A. How do you

let

Susan administer Domain B?

A. Make Susan a member of global group administrators in Domain A.

152. How does a NT machine communicate with a UPS system?

A. It uses a COM port.

153. You're being auditing an NT Machine, where do you look at the data?

A. Event viewer, security log.

154. Which built in groups can create and share a directory?

A. Administrators.

155. Which NT server feature eliminates the need for the LMHOSTS file?

A. WINS

156. What happens when the initial pagesize is exceeded?

A. The disk will become fragmented and applications will run slower.

157. You are the network administrator for Acme Inc., which has two NetWare

3.12 servers and one NetWare 4.1 server. The network number used on the

3.12

servers is 00000312 and 000000041 on the 4.1 server. The frame type used on

the

NetWare3.12 is 802.3 and in the NetWare 4.1 is 802.2. How must you configure

NWLink On the NT Server so that all the NetWare clients have access to the

NT

server?

A. By selecting Manual Frame type detection and adding de 3.12 and 4.1

client's

network numbers and frame types to the frame type configuration list.

158. Do you need to stop server services when backing up registry?

A. Not if you're using ntbackup.

159. You have 2 NetWare servers and 100 NetWare clients. You want to add an

NT

server with SQL resources. You make the NT server a member of the NetWare

domain, then What?

A. Nothing if you already installed NWLink.

160. You have 3 LANs with 2 NT Server each and 50 NT WS, the LAN's are

connected over a WAN. Servers and WS all have NetBEUI and TCP/IP loaded. WS

uses

90% NetBEUI, how you optimize performance?

A. Make NetBEUI top of the binding order in all WS.

161. Can you connect to a RAS Server if you are running the SLIP protocol?

A. No.

162. Connecting to a NetWare Server Through a RAS server. What do I need?

A. NWLink including RIP for IPX/SPX.

163. Can a Windows95 client Import Replication?

A. No.

164. You change a group permission for a directory, but user still has no

access. Why?

A. User needs to logoff and then logon again.

165. How would you start an application called flopscan.exe with a higher

priority than other applications?

A. From the command prompt type: start /high flopscan.exe

166. You want to create a Windows NT print queue for a HP laser printer

which

is directly connected to the network through a HP JetDirect interface card.

What

action must you take before you attempt to create the printer queue?

A. Install support for the HP network port.

167. You want a user to automatically execute a batch file at login time.

Which

of the following steps do you need to complete?

A. Create a batch file called login.bat and place it in the

winnt\system32\repl\import\scripts directory; in user manager set

"Login.bat" as

the user's login script.

168. You have recently installed a second processor in your windows NT

Server

to improve performance. What action should you take to configure win NT

appropriately?

A. Run the uptom.exe utility from the Resource kit.

169. How do you upgrade from Win95 to WinNT4.o ?

A. You can't.

170. You have several NT workstations that belong to a domain, these NT WS

have

resources. You want some users of the domain to gain access to the resources

in

the WS. What do you do?

A. Create local group on WS and add Domain Users global group.

171. You attach an external tape Drive to your NT Server. The tape uses a

SCSI

controller which you also install. What must you do to allow the new tape

Drive

and the SCSI controller to work?

A. Install a device driver for the SCSI controller, Install the device

driver

using Tape Devices in Control panel. Restart the server.

172. What RAS encryption authentication method handles DES?

A. MS-CHAP.

173. You have a WFW computer and you want to remotely admin domain user

accounts. What is the best way to do this?

A. Install Win32s and then install Client Admin Tools.

174. If someone deletes a file accidentally, do they have to be in the

Backup

Operator o owner to be able to restore file from tape?

A. No, Administrators, Backup Operators, Server Operators and anyone else

who

has "Restore File" rights can do it.

175. What data transfer protocols can be used with RAS?

A. NetBEUI, TCP/IP, IPX/SPX.

176. How do you set up the browser to send browse information to a LAN

manager

2.x system?

A. Check the appropriate box on Control panel | Network | services | server

|

properties.

177. You have a group of 15 researchers that need a network for print and

some

file sharing. Security is of ultimate concern because of the nature of the

work.

What type of network should you implement?

A. Workgroup with each researcher administer of his own workstation.

178. What is the minimum hardware requirements for NT Server installation?

A. 16 MB Ram, 486/33 Mhz, 124 MB disk space, and VGA.

179. Who can "Take ownership" of files?

A. Administrators, anyone with full control and anyone with the special

permissions.

180. How do you assign IP Address dynamically to RAS users (Through the RAS

server or by using DHCP?)

A. Either.

181. How do you edit user profiles in NT 4.0 Server?

A. in Control panel | System | User profiles.

182. What error message you got when your boot.ini is corrupt or missing?

A. NTOSKRNL.EXE is corrupt or missing.

183. How do you change foreground and background priorities in NT? A. In

the

system Properties dialog box.

184. How are user's permissions determined on a shared resource if he

belongs

to multiple groups with differing permissions?

A. The most restrictive group permissions would apply.

185. What program do you use to read files *.dmp files?

A. Dumpexam.exe

186. If you want to create a printer pool, what must be the same between

both

printing devices?

A. Must use same device driver.

187. Using free partition space on a SCSI Drive, you create a new

partition.

You highlight the free space, select create from the partition menu, specify

the

size and click ok. The new driver appears in the Disk Admin. What should you

do

next in order to finish creating the partition?

A. Select Commit Changes Now.

188. Where do you place files that you want to export from the PDC to the

BDCs?

A. In subdirectories of the winnt\system32\repl\export directory.

189. A DHCP server can supply clients with?

A. Default gateway, IP Address, Subnet Mask, DNS Server, WINS Server.

190. A user needs to look at many different options on the Performance

monitor.

What view would they use?

A. Use Report View.

191. You install Admin Tools on win95 machine, where you manage printer

security?

A. Windows Explorer.

192. You are installing NT Server and your non-SCSI CD-ROM is not detected.

What should you do?

A. Run installation again and select "S" to specify detection of additional

devices.

193. Your computer is currently running MS-DOS and you would like to

upgrade it

to a Windows NT Server 4.0 The computer is part of a network, but it does

not

have a CD-ROM Drive. How would you perform the upgrade?

A. Connect to a server in the network that contains the WinNT

installation files and run "winnt.exe"

194. Frank installs WinNT server on his computer. After the installation,

he

doesn't change the default username for the administrator's account. What

directory will his default desktop profile be stored in?

A. \\winnt_root\profiles\administrator\desktop.

195. You have an IDE hard disk and a SCSI hard disk. Each disk has only one

primary partition. The boot partition is on the SCSI hard disk, which has

its

controller BIOS disabled and its SCSI ID is 2. What is the correct ARC

pathname

in the boot.ini file pointing to the boot partition?

A. scsi(0) disk(1) rdisk(0) partition (1).

196. A user in your domain who needs to have different settings for his

laptop.

When he is at the office he would like the network services on his laptop to

start automatically, and when he is at home he doesn't want any network

services

to start. What can you do?

A. Create two hardware profiles.

197. If you want to create a hidden share for a resource so no one else can

see

the resource, what you must do?

A. Add the $sign to the end of the share name.

198. User has a network print devices that supports both PostScript and

PCL. He

wants to switch the printing mode to PCL. What is the best way to do this?

A. Create a separator page.

199. Your boss has asked you to configure a specific print device on the

network so that all documents sent to the device from the company managers

are

printed before all others documents. What should you do?

A. Create another printer and assign the new printer a priority of 99.

200. How can you monitor who has been accessing a certain print device on

the

network?

A. in the user manager for domains, enable Success and Failure auditing of

the

file and object access. Use the printers folder to specify what specific

events

or accounts to audit.

201. Your windows NT Server computer is acting as a file and print server.

Anytime a large job is being printed, users in the domain complain that

their

applications slow downs considerably. What can you do on the server to

increase

the performance of the applications?

A. Use the system applet in the control panel to increase the application's

foreground responsiveness.

202. If you want your WinNT server to run a shared access database, what

server

service should you select to optimize the server's task?

A. Maximize throughput for File Sharing.

203. You want to use Migration Tool for NetWare to migrate information from

a

NetWare server to a Windows NT server. What can you NOT migrate?

A. User passwords.

204. You want to merge account names from your NetWare servers into one

account

on your WindowsNT Server. What service do you need to accomplish the task?

A. Directory Services Manager for NetWare (DSMN)

205. You want to run a trial migration between a NetWare server and a

WindowsNT

server. After the trial migration, where should you check for the Success

and

failure information about the migration?

A. In the LOGFILE.LOG on the Windows NT Server.

206. If broadcast traffic is increasing on your TCP/IP network, what could

you

do to reduce the amount of traffic?

A. Install a WINS server.

207. The file is used to map IP address to NetBIOS names.

A. LMHOSTS

208. The files is used to map IP address to Host names

A. HOSTS

209. You are the network administrator for a domain. You need to assign a

user

the right so she can have full control to all printers in the domain.

Because

the network is expanding rapidly, you want to create a structure so you can

allow other users to have the same rights as in the future. Which of the

following is the best solution?

A. Create a global group PrintMgnrs on a domain controller and add the user

to

this group. Create a local PrinterMgrs group on each printer in the domain

and

put the PrintMgrs group into each Local Group. Assign the local groups the

Full

Control permission to the printers.

210. You just accidentally deleted a users account on a Windows NT server

computer. You want to recreate another account for the user with the same

username, permissions and rights that he had before his account was deleted.

What should you do?

A. Create another user account with the same name. Re-assign all

permissions

and rights to the new account that the old account had before it was

deleted.

211. You would like to implement a volume set on your WindowsNT computer.

Which

of the following statements are true about Volume sets?

A. A volume set can combine areas from an IDE, SCSI and EIDE drives. The

boot

partition cannot be part of the volume set. Once a volume set is

implemented,

MS-DOS and Win95 cannot be able to see the volume set.

212. You are setting up a RAS server at your company's head office. Several

sales people will be accessing the RAS server as they travel from site to

site.

They rarely call the RAS server using the same phone number. You want to

configure your RAS server so the field representatives can access it as they

go

from site to site. You need to implement callback security. On the RAS

server,

how should you implement callback security?

A. By selecting the Set by Caller option.

213. You are installing Windows NT Workstation 4.0 on a 486 DX4 /100

computer

for a client of yours. The computer only has a 700-MB hard disk. The client

will

be storing sensitive information on the computer. However, the information

will

take around 1 GB of hard disk space, and your small business client does not

want to get another hard disk. What should you do?

A. Convert the Disk to NTFS and then allow file compression.

214. The Alerter service on your Windows NT computer has failed to start.

Where

should you look to find out more about the failed Alerter Service?

A. In the event viewer, System Log.

215. You have a Windows NT server 4.0. you have 60 clients running win95

and

WinNT workstation connected to the server. If you want to backup all 60

clients

in the network, what is the minimum hardware requirement you should have?

A. One tape backup unit installed on the server.

216. What are supported under PPP clients to access NT Server Using RAS?

A. Named pipes, RPC, Winsock API (TCP/IP), Winsock API (IPX).

217. What will happen when you transfer an uncompressed file to a

compressed

folder?

A. The file will inherit the compressed attribute from the target folder.

218. What built-in user accounts can logon NT Server locally beside

administrators account?

A. Server Operator, Account Operator, Backup Operator, Print Operator.

219. Where does the device.log reside?

A. \winnt_root\System32\RAS

220. Scenario: You have a mirror set with SCSI disk BIOS enabled and one

disk

fails. How do you set uo the ARC path on your boot-disk?

Disk 0: System, Data, Data

Disk 1: Data, System (Mirror set), Data

A. scsi(0) disk (1) rdisk (0) partition (2).

221. What happens to file permissions when you use Windows NT Explorer to

copy

files from one subdirectory to another one on the same NTFS Partition?

A. All file permissions are inherited from the destination subdirectory.

222. You have a PDC called MAIN1. You install a member server with a share

called PAYROLL. The global group ACCTMGRS from PDC need to access this

share.

How do you manage?

A. Create a local group on member server called FINANCE and add the

ACCTMGRS

global group into FINANCE and grant the FINANCE group permission.

223. What are the steps you would take if you need to recover from two disk

failing in your stripe set with parity?

A. Replace the hardware, establish a new stripe set with parity and restore

your data from a tape backup.