Q-What are the minimum requirements for Disk Striping with Parity? 

1- one controller, two disks

2- one controllers, three disks

3- two controllers, two disks

4- two controllers, three disks

1- GSNW

2- CSNW

3- FPNW

4 - IPX/SPX

1 - Add a NIC to the Research server, enable Forwarding, and attach the Research workstations to the new subnet

2- add NetBEUI to the Research computers and the Research server

3- change the subnet via IP addressing on the Research machines to create a logical subnet

4- assign two IP addresses to the Research server's NIC

Q What is needed to enable Migration from NetWare to NT? 

1- FTP

2- GSNW

3- SAP Agent

4- DLC

Performance Monitor on Work Station to view this information. What must you do before this 

1. SNMP on each work station;

2. Install SNMP on the Work station;

3. Create log file on TCP/IP performance;

4. Create report on TCP/IP performance;

1.Users will log on successfully and will receive their profiles, but any changes made to the computer will be lost.

2.Users will not be able to logon to the domain.

3.Users can choose to log on to the domain and select a profile that is

4.Users will log on successfully and will receive the Default user profile.

Q You have 3 Win NT servers with RAS installed on 3 different network segments. Win NT workstations dial into the servers. How would you minimize the time to resolve the NetBIOS names? 

1. Install an LMHOSTS file on RAS server

2. Install an LMHOSTS file on each workstation.

3. Disable NetBIOS interface

4. Install WINS on Workstations

Q You have 3 Win NT servers with RAS installed on 3 different network segments. Win NT workstations dial into the servers. How would you minimize the time to resolve the NetBIOS names? 

1 Install an LMHOSTS file on RAS server

2 Install an LMHOSTS file on each workstation.

3 Disable NetBIOS interface

4 Install WINS on Workstations

1 Share Win95 Installation files

2 Make installation startup disk with Network Client Administrator

3 Make Installation disk set with Network Client Administrator

4 Install using startup disk

5 Install using disk set

Q You are administering a Windows NT Server computer from a Windows 95 client computer. You install Server Admin Tools on the Windows 95 computer. You want to share a CD-ROM that is attached to the Windows NT server computer. What must you use on the Win95 computer to do this? 

1 net.exe utility

2 Server Manager

3 Disk Administrator

4 Windows NT Explorer

Q You want to increase the performance of a Windows NT SERVER computer; there are usually 10 or fewer simultaneous connections. Which Windows NT Server setting should you configure: 

1 Workstation Service

3 Virtual Memory

4 Foreground application performance

Q You suspect that excessive paging resulting from the lack of memory is causing slow performance on an NT Server. You want to use performance monitor to confirm your suspicions. Which activity should you monitor? 

1 The number of pages per second on a server

2 The percentage of physical disk activity

3 The percentage of the paging file that is in use

4 Peak percentage of the paging file that is in use

1 Gateway Services for Netware

2 RIP

3 Nwlink

4 MS-CHAP*****

1 GSNW

2 RIP for NWLink

3 FTP

4 SAP

Q Your network has 5 WinNT server , which located on 3 different subnet. Users of remote WinNT workstation use Dial-Up Networking to connect to the network. You want to minimize the time it takes for these workstation to resolve netbios name. How can you do this ? 

1 Use a local Lmhosts file on each WinNT workstation.
2 Disable the Netbios interface on each WinNT workstation computer.
3 Use an Lmhosts file on RAS server.
4 Install the Wins server on each Win NT workstation computer

Q You configure a WinNT server with NWlink which resource on this server can be accessed by user at a
Netware client computer ? 

1 Any share directory that the user of the NW computer has right to .
2 Any share printer that the user of the Nw computer has right to .
3 Any client / server application that support Netbios.
4 No resources on the WinNT server computer can be accessed by a user at a netware client computer.

Q Your network has 3 Nt server computers. You want to be able to monitor disk-space usage on each server.
So that you will be notified when free space on any partition fall below 25%. How to do this ? a. On each server, use server manager to add your computer name or user name to the list of names that alerts should be sent to .

1 On each server, use server manager to start Alert server. Change the startup parameters so that your account name is specified as logon name for the Alerter Service.
2 On your comupter, use Performance Monitor to create an alert on the % free space counter for each server.
3 On one server, start the schedule server. Use the AT command to start the Dispert utility at desired intervals.

Q You want to view counter for TCP/IP activity on 3 Win NT server comupters. You will run Performance
Monitor on a WinNT workstation to view this information. What must you do before you can view these
counters. 

1 Install the SNMP service on each of the WinNT server computer.
2 Install the SNMP service on each of the WinNT workstation.
3 Create a log file on TCP/IP performance counters.
4 Create a report on TCP/IP performance counters.

Q Your network is configured as a single domain and has five WinNT server. You want to use Performance Monitor to analyze disk activity for a week on each server. 

1 Create an alert log

2 Use the report view

3 Use the chart view

4 Create a log file.

Q The paging activity has increase in NT server. As a result , the o/system has expanded the paging file
beyond the specified initial paging size. How it can affect the operation system ? choose 2 

1 Application can take longer to start b. Network I/O can be increased.
2 The disk containing the paging file can become fragmented.
3 The current contents of the paging file can be lost .

Q Suspect excessive paging resulting from a lack of memory . You want to use Performance Monitor to comfirm your suspicios. Which activity should you monitor ? 

1 The number of pages per second on the server.
2 The % of physical disk activity.
3 The % of the paging file that is in use .
4 The peak % of the paging file that is in use

Q Your network has 2 Nw 3.x server , 30 Micorsoft Dos comuter and 20 Microsoft Win3.1 computer. All
client computers use Nw client software. You want to add NT server computer to the network. The client computer will required access to a Netbios base client / server application on WinNT server. Which software is needed ? 

1 Client server of Netware

2 Nwlink IPX/SPX compatible transports
3 GSNW d. RIP for Nwlink

Q Your network has 1 NT server , 10 Win95 computers, 5 NT workstation . You want to backup a nightly backup of all file on the WinNT server including the registry. You want to do a weekly backup of all w/s data files. What is the minimum backup hardware required to perform these backups ? 

1 1 tape drive attached to WinNT server computer only .
2 1 tape drive attached to WinNT workstation only.
3 1 tape drive attached to NT server & 1 tape drive attached to Win 95 computer.
4 1 tape drive attached to NT w/station and 1 tape drive attached Win95 computer

Q Your Win NT server computer is configure to use Nwlink IPX/SPX Compatible Transports. Your client
computer also use Nwlink IPX/SPX Compatible Transports . The client computers are not able to connect to the server . What is wrong ? 

1 The subnet mask is not set correctly.
2 File permissions were set to No Access
3 Incorrect frame type was selected on teh server
4 The workstation service on the server failed to start.

Q You have a network consisting of NT servers and NetWare servers. Your NetWare clients are using a Visual Basic application that access a SQL database on one of the NT servers. What else must you install on the NT server containing the database so that your NetWare clients can access it? 

1 Install Gateway Services for NetWare

2 Install NWLink

3 Install the Client Services for NetWare

4 Install TCP/IP

1 Install Gateway Services for NetWare

2 Install NWLink

3 Install the Client Services for NetWare

4 Install TCP/IP

1 Create a user account named NTGATEWAY and assign it appropriate permissions

2 Install TCP/IP

3 Create a group named NTGATEWAY and assign it appropriate permissions

4 Create a NetWare accessible volume on the NT server

Q You are on a Windows95 client with the client network administration tools installed. You want to manage printers connected to remote NT servers from this Win95 client. Which tool do you use? 

1 User Manager for Domains

2 Server Manager

3 Windows Explorer

4 The Network option in Control Panel

Q You are installing a DHCP server. What TCP/IP related components can you specify for your clients? (select all that apply) 

1 Default gateway

2 WINS server

3 DNS server

4 FTP server

5 Subnet mask

Q Bob is a user on your NT network, and he wants a home directory so he can store some files. How do you give Bob a home directory? 

1 Use User Manager for Domains and specify a UNC path to the home directory for Bob's account

2 Use Server Manager and specify a UNC path to the home directory for Bob's account

3 Use User Manager for Domains and specify the domain name, server name, and share name for Bob's home directory.

4 Use the Network option in Control Panel

Q You are installing a RAS server and want your clients to determine their own security encryption. Which option should you select when configuring the RAS server? (Look at the screen shot on pg. 354 of the Core Technologies material) 

1 In the Encryption settings, select Require encrypted authentication

2 In the Encryption settings, select Require Microsoft encrypted authentication

3 In the Encryption settings, select Allow any authentication including clear text

4 Disable the DES security on the client computer

Q Which NT Performance Monitor counter would you monitor to determine if excessive paging is the cause of decreased performance? 

1 Memory

2 Disk

3 Processor

4 UDP

Q You want to monitor TCP/IP on several servers in your domain from an NT Workstation computer. What must you do? 

1 Install SNMP on the NT Workstation computer

2 Install SNMP on each of the servers to be monitored

3 Install the client-based administration tools on the NT Workstation

4 Another bogus answer

Q You are using performance monitor to monitor several NT servers, and you notice that performance on your workstation has been declining. You want to increase performance of your other applications while you monitor the servers. What must you do? 

1 Use the System option in Control Panel to decrease the priority of the foreground applications

2 Use the System option in Control Panel to increase the priority of the foreground applications

3 Use the START command to start Performance Monitor at a higher priority

4 Lower the Performance Monitor update interval

Q Your company has a central office and several remote locations connected by IP routers. Your clients, who are running NT Workstation, access local resources 90% of the time and remote resources 10% of the time. The clients use NetBEUI to access local resources and TCP/IP to access the remote resources. How can you optimize performance so that the clients can access all resources as fast as possible? 

1 Configure the bindings for the Workstation service on all of the servers so that NetBEUI is first and TCP/IP is last.

2 Configure the bindings for the Workstation service on all of the clients so that NetBEUI is first and TCP/IP is last.

3 Configure the bindings for the Server service on all of the servers so that NetBEUI is first and TCP/IP is last.

4 Configure the bindings for the Workstation service on all of the servers so that TCP/IP is first and NetBEUI is last.

Q you have 3 NT server running TCP/IP you want to monitor the % of disk space on the server from a workstation what must you do? 

1 Install SNMP on the 3 Servers
2 Install SNMP on the work station
3 use performance monitor to enable the disk counter on all LOGICAL drives and set an alert and type your user name
4 use server manager and add your computer to the list in the alert option

1 The number of pages per second on a server

2 The percentage of physical disk activity

3 The percentage of the paging file that is in use

4 Peak percentage of the paging file that is in use

1 A domain administrator must use Server Manager for Domains tocreate accounts for the Windows NT Workstation computers. A workstation administrator must log on to each workstation and configure it to join the domain.

2 A workstation administrator must use must log on to each workstation and create the computer accounts and then configure them to join the domain.

3 A domain administrator must use Server Manager for Domains tocreate accounts for the Windows NT Workstation computers. A