Thanks to the brain dumps, I passed with a 981 for Win NT Server 4.0 (70-
067). The following is what I got for each section.

Planning………………………….100%
Installation and Configuration……100%
Managing Resources……………..100%
Connectivity………………………100%
Monitoring and Optimization…….100%
Troubleshooting……………………90%

I’ve listed the test questions I got with the corresponding answers. Luckily I
got the standard questions. Pardon my short form. Good luck….. HighFlyer

1. Win95 and Win3.1 clients for MS-network and NWLink installed. Need
access to resources on NT and Netware server.
A. Install GSNW

2. Allow users to specify own security levels for RAS. Includes exhibit.
A. Allow any authentication including clear text.

3. Win95 and 3rd party dialing with DES. What is most secure access?
A. Require Encrypted.

4. Netware clients in network. New NT Server running SQL application
added to server. How do you allow the clients to access SQL?
A. Install NWLink

5. GSNW on NT Server. What else must you do?
A. Create group NTGATEWAY on Netware server.

6. DHCP for RAS. IP configured. What else?
A1. Default gateway
A2. DNS address
A3. WINS server

7. RAS with Winsock. Server and WKS running NETBEUI and TCP/IP.
What needs to be done to allow communication?
A. How an IP add will be assigned.

8. Win95 and DOS clients need access to Netware and NT.
A. Install GSNW.

9. NT Server with 2 NIC adapters.
A. Manually assign unique IP for each NIC.

10. Where should you place files so replicate to target NT Server. Includes
exhibit.
A. Subdirectory winnt\system32\repl\export

11. SCSI controller w/o BIOS enabled. Need to create boot disk. What file
needed?
A. NTBOOTDD.SYS

12. Fitch & Mather Co. Remote NT WKS with NETBEUI 90% and TCP/IP
10%. How to improve performance.
A. Bind WKS to use NETBEUI 1st over TCP/IP

13. Win NT Server install on CD-ROM.
A1. Boot to MS-DOS, run winnt.exe /b
A2. Boot from setup disk.

14. Convert FAT to NTFS with system files on FAT.
A. Use convert utility.

15. WKS on SUPPORT group changed over to SUPPORT domain. What do
you need to do?
A1. Domain Admin in Server manager, add WKS accounts.
A2. Manually log each WKS to domain using Network option.

16. Created new partition. What must you do?
A. Commit changes now.

17. Non-SCSI CD-ROM not detected when installing NT Server. What
should you do?
A. Select “S” to specify additional devices.

18. TCP/IP configured in non-routed network. What else do you need?
A. Subnet mask.

19. MS-DOS machine need to install NT Server from network share. What
must you do?
A. Connect to share and run winnt.

20. Pool 2 printers together. What do you need?
A. Must use same printer drivers for both printers.

21. PDC with 3 member servers. Want to improve logon.
A. Reinstall a member server to BDC.

22. SCSI tape backup install. What do you need to do?
A1. Install device driver for SCSI controller.
A2. Install tape device driver.
A3. Restart computer.

23. Need to monitor TCP/IP on NT servers using performance monitor. What
do you need to do?
A. Install SNMP on each NT Server.

24. Excessive paging. What do you need to do?
A. Add more memory

25. NT Server with 10 or fewer connections. How do you change server
settings to take advantage of situation?
A. Server Service.

26. Want to monitor servers for a week. What do you do?
A. Create a Log file.

27. Want to monitor disk space on other servers. What do you do?
A. Performance monitor - % free space.

28. 2 2-GB HDs with 2 NTFS partitions each. 1st HD has system and boot
partition and pagefile.sys. How to improve performance.
A. Move paging file to second physical disk.

29. How to verify excess paging causing performance degradation.
A. Look at counter - Number of pages per second

30. Netware clients need access to client/server applications that support
NETBIOS on NT server.
A. Install Nwlink on NT Server.

31. Want fault-tolerance. Have 2 4GB SCSI HDs with separate SCSI
controllers.
A. Disk duplexing

32. Installed 3 physical drives. How to provide fault-tolerance.
A. Striped set w/ parity

33. NT Server installed with NetBios. How to provide client/server access?
A. Install NWLink IPX/SPX

34. Tape backup taking too long to run on server. Server used to back up
other servers and WKS.
A. Install second tape drive on another server to back up WKS and the
original to back up servers.

35. 4 2-GB HD on NT Server. How to provide fault tolerance?
A. Disk stripe w/ parity

36. File permissions if moving file to subdirectory on same NTFS partition.
A. Retained

37. Infamous mandatory profile question.
A. User cannot login.

38. Where do you create a shared directory?
A. Server manager

39. PDC called Main1. Installed a member server with a share called
PAYROLL. Global group ACCTMGRS from PDC needs access to share
PAYROLL. How do you accomplish this?
A. Create a local group on member server called FINANCE and add
ACCTMGRS global group into FINANCE and grant FINANCE group
permissions.

40. Manage file permissions from Win95.
A. Windows Explorer

41. Assign home directory for Eric. How do you do this?
A. Use user manager for Domain to specify UNC path to home directory.

42. Need to alert domain admin of any system events for 4 domain
controllers.
A. Add each user of the domain admin to the list for each server.

43. Want to create a roaming profile for Alec. What do you do?
A. Use User Manager for Domains to specify UNC for the profile.

44. Managing printing services using Win95.
A. Windows Explorer

45. Moving files from NTFS to FAT. What happens.
A1. LFN retained.
A2. Permissions discarded.

46. Replaced bad drive that was part of a mirrored set. What’s next?
A. Break mirrored set

47. Queue stalled for Printer. What do you do?
A. Stop and restart printer service.

48. How to recover if 1 HD of a SWP failed. HD was replaced. What’s next?
A. Create free space equal to other partitions on new HD and select
Regenerate from Fault Tolerance menu.

49. How to modify port for printing to select another network printer?
A. Specify a new port UNC name printer.

50. Client with IPX/SPX cannot communicate with NT Server. NT has
NWLink installed. What is the most likely reason?
A. Incorrect frame type.

51. Need to backup registry. What do you use?
A. NT Backup

52. Exhibit included. John has been promoted from sales dept. to
management. He needs to be able to change files in a share called PrivData.
You have added him to the managers group, but he can not access PrivData.
What do you need to do? (Picture shows Managers group have change
permission to PrivData and the Sales group have no access).
A. Remove John from the Sales group.

53. Boot Virus found on boot sector. What do you do?
A. Boot from setup disks and press ‘R’ to repair. It will prompt for
Emergency Repair disk

54. RAS clients getting disconnected.
A. In registry, enable device logging.

55. Mirrored set, SCSI adapter, BIOS disabled. 3 partitions on each disk.
What is the ARC path to the mirror?

Disk0: System | Data | Data
Disk1: Data | System (Mirror) | Data

A. scsi(0)disk(1)rdisk(0)partition(2)