Subject: Payback - NT Server 4
Missed only one question. Here it is.
1. What is the minimum requirement for Disk Duplex? Ans: Two disk controllers and two physical disks
2. What is the minimum number of disk controller and physical disks for Strip Set with Parity? Ans: One disk controller and three physical disks.
3. Exhibit of disk administrator - disk 0 has 3 partitions system | data | data. Disk 1 is a mirror of disk 0 with 3 partitions data | system | data. Both disks are SCSI with BIOS disable. What is the ARC for system patition on Disk 1? Ans: Multi(0)Di
4. Trick question: Print spoolfile is ran out of space. What to do? (a) on properties of the server, move spoolfile to partition with more free space (b) for each printer, move each printer spoolfile file to partition with free space. Ans: -a (wrong).
5. How to troubleshoot RAS? Ans: Edit registry to enable device.log
6. Trick question: How to create boot disk? (a) format disk using MS-DOS; copy NTLDR, NTDETECT, BOOT.INI and NTBOOTDD.SYS; edit BOOT.INI (b) format disk using Win NT; copy NTLDR, NTDETECT, BOOT.INI and NTBOOTDD.SYS; edit BOOT.INI. Ans:b (Right?)
7. How to add 10 WinNT workstation to domain? Ans: Use User Manager of Domain to create account, use Server Manager to create computer account for WS, log on WS join the it to domain (did not ask where to join but it should be done in Network applet in
8. Trick question: Audit file where WRITE (both success and failure checked), CHANGE (only success checked). (a) audit all change (b) blah blah (c) all unsuccessful delete (d) all unsuccessful modification
9. How to share CD-ROM using Win 95 Client Administration? (a) Window Explorer (b) Server manager. Ans: b (one braindump suggested Explorer. I did hand on test the tool and confirm myself that Server Manager is correct)
10. Page file is bigger than initial set up page file. What will happen? (Multiple choices) (a) disk more fragment (b) blah blah (c) app starts slower (d) blah blah. Ans: a, c
11. How to use Performance Monitor to very file the need of more RAM? Ans: page/sec
12. You bring a Netware server into an existing NT and 95 domain. What do you do to? Ans: install and configure gateway service on NT server and do not thing
13. How to set up boot up floppies from CD ROM (a) from DOS, run winnt.exe (b) from dos run setup.exe (c) from NT run winnt.exe (d) blah blah. Ans: a (remember winnt32 run on NT OS, there is not setup.exe)
14. How to install 95? Multiple choice (a) share installation files (b) create boot disk from Network Client Administrator (c) blah blah (d) boot from book up disk (e) blah blah. Ans: a,b,d
15. After install GSNW, what do you do next to share resource? Ans: From GSNW applet in control panel, map and share the resource (activate gateway)
16. You have NT WS dial into RAS server to access secure database. You also have third parties client dial in with no need of encryption. How do you configure the RAS server? Ans: Configure modem ports to use with encryption and configure NT WS to dia
17. You are administrator for 3 LAN via RAS. What must be set up to allow autodial to resources on 3 LAN? Ans: Set up phone book entry for each dial in location
18. You have 3 disk. Disk C has system partition. What fault tolerance can you set up? Ans: Mirror
19. You have 4 disks of 250 MB each. What is the max data space available if you configure these disk as Strip Set With Parity? Ans: 750
20. How to upgrade 3.51 to 4.0 and preserve all configure setting. Multiple choices (a) boot from setup disk and install into Winnt35 directory (b) blah blah (c) while winnt 3.51 runing, execute winnt32.exe and install NT into winnt35 directory (d) run
21. What file is needed for SCSI disk with bios disabled on boot disk? Ans: NTBOOTDD.SYS
22. Strip set without parity fail, what to do? Ans: restore data from tape
23. What is the easiest way to add lot of user to domain? Ans: create temp_usr, set appropriate properties and group, copy temp_usr
24. User have roam profiles and mandatory. If server contain profile fail, what happen when user log on? (a) log on success and receive Default Profile (b) Log on successfully and receive their profile but any change will not be saved (c) blah (d) blah.
25. You monitor many server. Your work station is slow. What do you do? Ans: Increase monitor interval.
26. How to demote PDC to BDC from Win 95 client administrator? Ans: From Server Manager, select BDC and promote it to PDC
27. Replication - Exhibit show PDC export to domain name DOMAIN1. Mulitple choice (a) all BDC can import (b) all member server in DOMAIN1 can import (c) all work station in DOMAIN1 can import (d) all win 95. Ans: a,b,c (only NT Server or WS can import.
28. Netware client using different frames and can not communicate with NT server. What is the likely cause?
29. You have 3 domains on the same subnet. All computers are configured to run TCP/IP. Users of one domain RESEARCH often copy 100MB files to the server. What do you do? Ans: Configure all computers in RESEARCH domain with a different subnet and enab
30. You have Netware Computer on net work. You bring in a new NT server and set up IPX/SPX protocol. What resource on NT server that Netware client can access ?
31. You install TCP/IP in a non-route network. What else must you configure TCP/IP? (a) subnet (b) default gatgeway (c) WINS (d) DHCP. Ans: a
32. You have Netware clients running different frame type. How do you configure the server to recognize them all? Ans: - Manually configure all frame.
33. Printer stalled. What do you do? Ans: - Stop and restart spool servvice
34. HP Printer installed but you can not find the port. Why? Ans: DLC is not installed.
35. You want to back up NT registry. How? Ans: - Select file on partition that contains registry.
36. You see message "one of the service "xyz" can not start". Where do you look for additional information? (a) Performance Monitor (b) Server Manager (c) System Applet in control panel (d) Event Viewer. Ans: - d
37. What is the minimum hardware requirement to back up 1 NT server plus registry, 10 NT WS, 50 Win 95? (a) one tape backup on server (b) one tape back up on NT WS (c) 10 tapes backup on NT WS (d) blah blah. Ans: - a (The key is registry on NT must be ba
38. Exhibit - RAS server allows remote client to run NetBEUI, TCP/IP (Dial in configuration). What can the client access? (a) NetBIOS application (b) winsock application (c) IPX/SPX application on Netware server (d) local resource on RAS client. Ans: a
39. You want to monitor disk performance for 1 week to find out high performance hit time. What performance view do you use? (a) event alert (b) chart view (c) log (d) report. Ans: c
40. You want to be notify when disk space on 5 servers are less than 25% empty. How do you set it up? (a) set up alert on each server (b) blah (c) blah (d) set up 5 alert counters for each server on your workstation. Ans: - d
41. You have one PDC and 3 BDC. You want to convert PDC into database server. What do you do? (a) Promote one BDC to PDC. Reinstall NT on PDC and configure it as a member server (b) blah (c) blah (d) blah. Ans: a
42. You install new video card. Your server did not boot right. What do you do? Multiple choice (a) choose VGA mode (b) choose Last Good Known (c) reinstall NT (d) select Display applet in control panel and install new video driver. Ans: - a, d
43. You have NT 4.0, 3.51 and win 95 computer. How do you install printer driver? (a) all drivers of all OS on print server (b) only NT 4.0 on printer server since NT 4.0 driver is downward compatible to 3.51 and 95 (c) blah (d) blah. Ans: a
44. You wan to migrate Novell to NT. What must be installed on NT? (a) FPNW (b) GSNW (c)RIP for IPX/SPX (d) NWLINK protocol
45. You add user Bill to Developer group to have access to files in directory Developer. Bill still can not access one of a word document. Why? Ans: Bill must log off and log on again.
46. You want load balance for log in scrip procession. What do you do to? Ans: Replicate logon script from PDC to all BDC.
Pardon all miss-spell.
Payback.