Here are some braindumps from the NT Server Core examen. In some of the questions I don't remember the exact words, but I think I got the meaning all right.
1:
You have 3 Win NT servers with RAS installed on 3 different network segments. Win NT workstations dial into the servers. How would you minimize the time to resolve the NetBIOS names?
* Local LMHOSTS file
* LMHOSTS file on RAS server
* Disable NetBIOS interface
* Install WINS on Workstations
2:
A Win NT Workstation dial into a RAS server with the following setup:
Dial Out Protocol
NetBEUI
TCP/IP
IPX/SPX
Remote Clients
NetBEUI
TCP/IP
Encryption
Clear text..
What is the WS able to do (select all)?
* Use resources on the RAS server
* Use aplications that require Win Socket
* Use applications that uses NetBEUI
3:
You have a mirror set with SCSI disks with BIOS enabled and one disk failes. How do you set up the ANC path on your boot-disk?
Disk 0: system, Data, Data
Disk 1: Data, Mirror set, Data
* multi(0)disk(0)rdisk(1)partition(2)
* multi(0)disk(0)rdisk(1)partition(0)
* multi(0)disk(0)rdisk(1)partition(1)
4:
You have a network with one NT server, 10 Win95 clients and 5 NT WS. Every day you want to back-up the server and once a week you want to back-up the clients (95+WS). How do you do that?
* Put on Tape station on the Server
* Put Tape station on WS and 1 on 95
* some other possibilities
5:
You have a Win95 PC with client administration for NT installed and a Win NT Server. You want the computer to be able to connect to a NetWare Server. How do you do that?
* Map the drive on the NetWare Server
* Server Manager - Shared directories
* GSNW
* Usermanager for domains - Logon To..
6:
You have a computer with 5 disks - each with 2 partitions. On the first disk is the boot and system partition. How will you optimize the pagefile?
* Split the pagefile on the other 4 disks
* Put the file on the boot an system partition
* .......
7:
You have a computer and you have enabled audit like this:
WRITE: Success and Failed
Change Permissions: Success
The permissions only relate to files in the folder and not subdirectories.
Choose the right one
* You will get an entry if a user tryes to delete a file in the folder
* You will get an entry if a user tryes to write to a file in the folder
* You will get an entry if a user tryes to write to a file in a subfolder
* ...
8:
You have 30 MS-DOS machines and 20 WFWG machines and you want them to be able to connect to 2 NetWare Servers. How?
* RIP
* NWLink
* GSNW
You have a NT Server running IPX and some kind of client also running IPX, but they are not able to connect. Why?
* Wrong subnet
* Wrong Frame Type
* Permissions are set to No Access
9:
You want to back-up WinNT Registry with NT's back-up program. How
* Differential
* Run WinNT back-up program from a remote computer
* Stop Server Service
* Specify a folder that contains a least on file the has something to do with registry
10:
You have a document that will not print because of lack disk space. What do you do?
* On the Server, go to registry and specify a new location for the spool file
* On the Printers go to registry and specify a new location for the spool files
* Use explorer...
11:
A user with a Win95 client connect to a shared printer, but cannot acces. The administrator puts her in a group with correct rights, but still she cant connect. Why?
* She user wrong password
* She do not have an account in the domain
* The change of group will not take effect before she logs off
12:
You have an WinNt Srever that runs IPX, and you have a NetWare client. Will the client be able to access
* Directories
* Printers
* Client/server applications that support NetBIOS
* Access nothing
13:
How would you install Win95 over a network? (Choose all)
* Share Win95 Installation files
* Make installation startup disk with Network Client Administrator
* Make Installation disk set with Network Client Administrator
* Install from disk
* Install from disk set
14:
You have installed a monitor on your WinNT Server, but when you test a resolution, it fails. Therefore you install another videocard. What must you do? (choose all)
* Reinstall NT Server
* Start up in VGA-mode
15:
You have a network with a PDC and 2 BDC's. You decide to use the PDC as an application Server. What do you do?
* Promote a BDC to PDC and demote the PDC to member server
* Shut down the PDC and promote BDC to PDC
* Shut down the PDC and the BDC you want to promote, Start the BDC up again and it will automatic become PDC
16:
You have a network that uses IPX/SPX.. Half uses 802.3 and the other half uses 802.2. You add a computer running WinNT Server with 1 network adapter installed. How can all clients running IPX/SPX access til NT?
* RIP
* Auto Frame
* Manual Frame
* First install a driver for 802.2 and then install a driver for 802.3 to the same network adapter
17:
You are running Performance monitor on a NT Workstation. You are monitoring memory and disk performance on 10 WinNT Servers. Performance on the Workstation is poor and you want to increase performance but how?
* System properties - decrease time for foreground application
* Run Performance Monitor from a Command line useni /START
* Start diskperf to build up a big cache
* Increase the time you are collecting data
18:
Your pagefile has increased its volume. How will that affect? (choose all)
* Applications will start more slowly
* I/O of the network will increase
* The disk will be defragmented
* Current content of the pagefile will be lost
19:
You want to make it easier for yourself to make user acounts. Therefore you make a template called USER_TEMPLATE and assign permissions and groups to the template. How do you use the template when you make new accounts?
* New account automaticly get the permissions and groups specified in the template
* You have to create a global group called USER_TEMPLATE and put new accounts in here
* You simply copy USER_TEMPLATE to a new account
* You create new accounts and highlight them, and copy USER_TEMPLATE into them
20:
You want to monitor disk space usage on a WinNT Server. You want to be notified when disk space left is under 25%. How?
* Server Manager - Alerter
* Performance Monitor - Alert on % Free space counter
* Start Diskperf with AT-command in Schedule now and then
21:
How can you share a CD-drive on a WinNT Server when you are running Win95 and client administration tool?
* Server Manager
* User Manager for Domains
* Explorer
22:
You have a network with 3 NT Servers. In the network there is 50 Workstations. All computers are running TCP/IP. Now and then a group of people have to copy 100MB of data to one of the servers. That slows down the network. How can you prevent this?
* Install a new Network adapter card on a different subnet and enable ip-routing
* Let them run NetBEUI
* Give the same Network Adapter 2 ip-adresses
23:
You have a Network printer that prints for WinNT 4.0 and WinNT 3.51 users. What about the driver?
* 4.0 and 3.51 uses the same driver
* Under the installation you must specify which clients that will use the printer
* ...
24:
You have a network printer, but when you try to access it you cant see it. Why?
* The printer is already installed
* You forgot to install DLC
* Wrong driver
* You forgot to specify the printer port
25:
You have 3 PDC's and a user have a mondatory profile on the server. Now the Server fails and shut down. What happens?
* The user cannot log on
* The user can logon and gets the default profile
* The user can logon but cannot change password
26:
If you have to create a boot-disk to a computer with SCSI-disks with BIOS disabled, what file do you need
* Ntbootdd.sys
27:
You move a file from a NTFS to a FAT partition on the same disk. (choose all)
* The permissions are discarded
* The LFN are inherited
* ....
28:
What must be installed before you can migrate users from a NetWare Server to NT
* RIP
* GSNW
* SAP Agent