jester

The first 41 answers below are that from ôhondaÆsö entry on braindump. I have added extra answers + a few questions on the exam today. Thanks to BrainDump for the help, (another passer by) and time to move onwards and upwards. Know this and your through

1. INSTALL SNMP ON "EACH" SERVER

2. Start your server with the new card in VGA-mode

THEN Install the new driver in 'Display Properties'-'settings'-'change'

3. Increase the time intervall of auditing <-

4. SERVER MANAGER TO FIND OUT THE OPERATION SYSTEM AND FUNCTN OF OTHER COMPUTERS IN YOUR WED

5. INSTALL GSNW on the NT Server. Yo need NOT configure your W95 clients.

6. INSTALL GSNW on your NT Server before you migrate a Netware srver

7. Allow all users to access the RAS server AND SET UP ENCRYPTION ON DATABASE SERVER

8. MULTI(0) DISK(0) RDISK(1) PARTITION (2)

9. Enter at least one of the files the registry consists of in the backup directory.

10. add a 2nd NIC in this group's server. You split your network physically, the large files (IP ROUTING)

11. Start NT 35.1 and use winnt32.exe and install NT 4.0 in the same directory as NT 3.51

12. a driver for "each" platform and NT-version <-

13. LONG FILENAME WILL BE PRESERVED files will inherit permissions of target directories

14. run winsock apps

run NetBEUI apps

Access shares on RAS Server

15. ENABLE LOGGIN IN REGISTRY

16. USE LOG

17. PROMOTE BDC TO PDC

18. SUBNET MASK

19. USERS CANNOT LOG IN

20. ALLOCATE PAGING TO OTHER PARTNS EXCEPT ON BOOT AND SYSTEM PARTITION

21. REDIRECT TO ANOTHER SPOOL DIRECTORY

22. SHARE WIN95 INSTALLATION FILES

MAKE AN INSTALLATION "STARTUP" DISK

INSTALL USING THE "STARTUP" DISK

23. SERVER MANAGER ALLOW U TO SHARE A CD-ROM THAT IS ATTACHED TO WIN NT SERVER

24. DISK DUPLEXING

25. NT SERVER(PDC,BCD), MEMBER SERVERS, NT WS CAN BE A IMPORT COMPUTER

26. ALL FILE PERMISSIONS ARE INHERITED FROM THE DESTINATION SUBDIRECTORY

27. ENSURE THAT ONLY MEMBERS OF THE ADMINISTRATORS GRP HAVE THE RIGHT TO LOGON "LOCALLY"

28. ANY ATTEMPTS TO MAKE CHANGES TO AN EXISTING FILE IN THE E:\CORP-DIRECTORY WILL BE AUDITED

29. STRIP SET WITHOUT PARITY, ONE OF THE DISK FAILS, YOU CAN ONLY RESTORE THE LOST DATA FROM THE TAPE BACKUP

30. CONFIGURE MANUAL FRAME TYPE DETECTION

31. FROM GSNW OPTION IN "CONTROL PANEL" USE THE GATEWAY OPTION TO SHARE THE DESIRED DIRECTORIES ON THE NETWARE SERVER (THERE WAS A BOGUS ANSWER QUITE SIMILAR TO THE ABOVE EXCEPT IT SAID USING "SERVER MANAGER")

32. APPLICATION WILL START MORE SLOWLY THE DISK WILL BE FRAGMENTED

33. LOGOFF AND THEN LOG BACK IN

34. START UP IN VGA-MODE THEN INSTALL VIDEO CARD DRIVER IN "DISPLAY" PROPERTIES

35. INCREASE THE TIME INTERVAL

36. CREATE A USER_TEMPLATE ACCT AND THEN COPY THIS USER_TEMPLATE TO A NEW ACCOUNT

37. YOU FORGOT TO INSTALL DLC

38. PAGES/SECOND

39. NTBOOTDD.SYS

40. DISK SPACE ALERT, ADD ADMINISTRATORS TO THE NOTIFICATION GROUP ON EACH SERVER

41. REPLICATE DIRECTORY

42. 1controller, 3 disks (disk striping with parity)

43. 2 disks 1 controller (disk mirror)

44. 2 disks, 2 controller (disk duplexing)

45. IPX/SPX (Install on svr for DOS access)

47. Edit boot.ini if primary disk fails

48. Take out of old group

49. Log out and back in

50. Schedule printer in printer tab

51. Add local port to failed printer type in UNC path

52. Enable device logging in registry

53. Default Gateway, DNS server address, netbios res

54. Usr mgr to create a/c, svr mgr to add ws. Enter dmonain on each ws

55. Allow all usrs to access RAS, data encription for db

56. Run WINNT from Dos to install WinNTSVR

57. Run WINNT32 to upgrade 351-4.0

58. Replication û scripts from PDC to BDC

59. 750MB

60. Install LMHost on all WS

61. RAS AUTODIAL û need phone book entries

62. UNC to users home directory

63. Changes to files in CORP directory will be audited

64. Create user a/c but cannot assign writes û ACCOUNT OP