Subject: server braindumps
Wrote Server today (Mar 4/98) & received a score of 818.
I thought that I scored higher than that.
After Scoring high with NetEssentials 960'something (don't remember exactly, but I know that I missed it by 3 questions for a score of 1000).
With Server, I figured that I missed ten questions in total.
I strongly suggest that people get transcender exams and any good braindumps especially the latter ones.
I would also suggest that people get their hands on the Exam Cram red books.
The microsoft manuals are easy to read but their is very little corelation between the actual exams and what you read.
You have the MS geeks who participate on the beta testing and probably have the PR people who write the Manuals.
Never rely on the Manuals alone. If you do, your kissing $100 us away.
The three pack that you need to pass these exams are as follows:
As many good braindumps you can find
Transcenders - make them your bible
third-party books - especially examcram red books. Easy to read and understand.
Method of learning.
- Read.
- Do as many labs as you can. Don't want MCSE's who are book smart but can't Fdisk or find "on" button
- Do you as many tests as possible. Transcenders, MSprep tests, questions etc.
Anyway, people are getting tired of my philosophy.
Thanks to all the warriors out there who post braindumps.
Special thanks to all the chiefs on the web, who carry these sites.
Anyone out there, feel free to correct me if I have been wrong:
This is want I can remember:
1). You add a new SCSI controller and network adaptor to an existing Windows NT server computer. After you start the server, you receive a message that says "The dependency service failed to start".
Where should you look for additional information about this error?
2). Your Windows95 client computers access shared ressources on a Windows NT Server. The Windows95 computers have Client for MS networks installed. You want to allow the Windows95 client computers to access files on a Netware Server.
You install Gateway Service for Netware on the Windows NT Server. What else should you do on the Windows NT Server computer to allow the Windows95 client computers to access files on the Netware server?
Q3: How to create a homedir on a BDC for user Alf?
Q4: John should logon on every workstation and get always the same desktop. How?
Q5: Single domain, four Domaincontrollers. All network administrators use NT-workstations. You want to provide notfication to users who are administrators in the domain when a system event occurs on any of the servers. How?
Q6: Print device on server fails. Try to send waiting documents to another printer.
Q7.ARC naming : 2 mirror disk (SCSI BISO not enabled)
1st disk of partitions : System/Data/Data
2nd disk of partitions Data/System/Data
What should be the entry in boot.ini for disk 2 ?
Q8.Remote user on Win95 dial-in to RAS with 3rd party PPP DES encryption. What is the highest possible security can be implemented ?
Q9.Winsocket appliction. RAS clients. Server supports NetBeui & TCP/IP. NT Clients using NetBeui & TCP/IP.
Q10.Logon Domain from any WinNT Workstation and receive own desktop
Q11.INTEL installation using CD-ROM, fail to detect non-SCSI CD-ROM
Q12.NT Server CD-ROM installation on DOS Workstation(Choose all)
Q13.Migrate Workgroup into Domain. All Workstations to be participating in Domain
(Choose all)
Q14 .1 HD 2 partitions. C: (FAT) Boot files + System. D: (NTFS). To convert C: to NTFS
Q15 You have installed GSNW on NT Server, what other step is required.
Q16. You have 2 disks (Scsi), each with 3 partitions , connected to a single
controller(Bios Disabled) and are using Software Raid 1. Your first disk
fails, how do you modify your startup boot disk boot.ini to point to
the mirror set.
Q17. You have a NT Server and a Novell server. All the clients use Netbeui to
connect to the NT Server, how can you enable the clients to connect to
the Novell server without having to install additional protocols.
Q18. You have a PDC called MAIN1. You install a member server with a share on called PAYROLL. The global group ACCTMGRS from the PDC needs access to this share, how do you grant it.
Q20. Performance Monitor - doing test on 5 different PCs over a week - which do you use?
Q23 . How can you configure the highest level of security in a RAS Server
with clients dial in from DOS with DES Encryption and Windows 95
clients.
Q24 Your CD-ROM was not detected when you tried to install NT. What do you do.
Q25 . You have a mirror set with SCI discks with bios enabled and one disk fails.
How do you set the ARC path on the boot disk to point to the mirror on the second disk.
Q26 . Intel installation from CD, fails to detect your non-SCSI CD.
Q27. Your Windows95 client computers access shared resources on a Windows NT Server. The Windows95 computers have Client for MS networks installed. You want to allow the Windows95 client computers to access files on a Netware Server. You install Gateway Service for Netware on the Windows NT Server. What else should you do on the Windows NT Server computer to allow the Windows95 client computers to access files on the Netware server?
Q28. What computers can be an export computer?(choose all correct)
Q29. a user needs to look at many options on the perfmon.
Q30. Exhibit - RAS server allows remote client to run NetBEUI, TCP/IP (Dial in configuration). What can the client access?
Q31 YOu must install NT4 WS on 20 laptops and on 50 desktops
Required result:
Must automate install of NTWS on all computers.
Optional:
you want all computers to join the CORP domain
You want automate install of applications
Q33) Next question the same, solution the same but instead of windiff,
sysdiff is used for install application
Answer: Proposal meets required and optional results.
Create a UDF for user account stuff
This is payback.
Thanks to all the MCSE wannabe's
>From Someone, Somewhere in Canada