Hello , everybody.
I pass today exam 70-67.
I used MS coarse ware text book = CoreTech , Osbourne Workstation
, Osbourne NT 4 in the Enterprise ,
Some Demo test questions of MCSE Quest 4.1, Trancenter ,
BeachFrontQuizzer and Peptest.
If you finished the books and test questions then you get to pass the exam .
If used BrainDump site to back up and you will get another to pass the exam .
If you are relax and not too nervious during the test then get
to pass the exam .
--------------------
Get my analysis ?
First of all ....
I would like to thank all the contributors for their efford and the
members (LearnQuick) who keep this site running.
You peoples are really did a very good job for all the MCSE " wanna's
bee "....
I solute you all so far I will pay back my contribution and
support .
I marked X with the answer I choosed .
Here is the result today of my 70-67 NT 4 server.
| Exam. = Implementing and supporting Microsoft
Windows NT Server 4 Time = 120min Questions = 55 Min score = 764 Date = 13.Nov.98 |
PASSING SCORE : 764 YOUR SCORE : 927 GRADE : Pass
Section Analysis Percent Correct
1. Planning
.....................................................................................................................
100 %
2. Installation and Configuration
................................................................................ 92 %
3. Managing Resources
................................................................................................
90 %
4. Connectivity
...............................................................................................................
87 %
5. Monitoring and Optimization
................................................................................... 100 %
6. Troubleshooting
........................................................................................................
90 % .
1. Your Win95 computer access shared resources on Win NT server. The
Win95 have client for Microsoft
Network installed. You want to allow Win95
client to access files on a NW server. You installed Gateway
Service for Netware in the WinNT server.
What else should you do on the WinNT server
computer to allow the Win95 client to access files on the
Nw server ?
a. >From Win NT
Explorer, use the Map Network Drive button to connect a drive to the netware
server .
Then
share that mapped drive.
b. From
Server Manager, use the Shared Directories option on the comupter menu to share the
desired
directories
on the Netware server.
X c. From the Gateway Service For
Netware option in control panel, use the Gateway opton to share the
desired
directories on the Nw server.
d. From User
Manager for Domain, use the Logon To option in the User Properties dialog
box to allow
the
Win95 client computers to access the Nw server.
2. You want to migrate the files and user accounts
from a Nw server to a WinNT server .What must you install
on the Win NT server before you can
perform the migration ?
a.
FTP b.
Rip for Nwlink IPX/SPX Compatible Transport
X c. GSNW
d. SAP Agent
3. Your network has 5 WinNT server , which
located on 3 different subnet. Users of remote WinNT workstation
use Dial-Up Networking to
connect to the network. You want to minimize the time it takes for these w/station
to resolve netbion name. How
can you do this ?
X a. Use a local
Lmhosts file on each WinNT workstation.
b. Disable
the Netbios interface on each WinNT workstation computer.
c. Use an
Lmhosts file on RAS server.
d. Install
the Wins server on each Win NT workstation computer .
4. A RAS server on your network .Remote users
use NT workstation with Dial-Up Networking to acess a
database . The database stored
on a different WinNT server from the RAS server. You want to use data
encryption to provide security
for ...... That is transmitted to and from the database via DUN.
User of other client computer,
use 3rd party PPP software, need access to RAS server to run applications
other than the database. These
client do not support data encryption . How can you configure ?
X b. Configure the
RAS server to require data encryption for specified modem ports.
Configure
the Win NT w/station to dial in to modems attached to only these ports.
5. You configure a WinNT server with NWlink which
resource on this server can be accessed by user at a
Netware client computer ?
a. Any
share directory that the user of the NW computer has right to .
b. Any
share printer that the user of the NW comupter has right to .
X c. Any client /
server application that support Netbios.
d. No
resources on the WinNT server computer can be accessed by a user at a netware client
computer.
6. The Nw3.x server at your branch will be
moved to headquaters network. The headquators network has 1
Win NT server and 60 Win95
workstations. The headquaters workstations use Client for Microsoft Network.
You want all headquaters
w/station access to file & printers on both Nw 3.x server & Win NT server.
How should you setup Win
NT server comupter & your win95 w/station ?
X a. Install
and configure GSNW on Win NT server computer. No addtional software is required on the
Win95
workstations.
7. You are the administrator of 3 network in
separate locations. You administer these network remotely by DUN
from your Nt w/station. You
want to be able to use RAS AutoDial feature to automatically connect to each
RAS server. Base on the
UNC name or DNS name of a remote resource on the server , what must you do
with WinNT w/s to use AutoDial
?
a. Install
the DNS service b. Install a null modem
adapter c. Configure the w/s with SLIP
X d. Create a phone
book entry for each RAS server you want to use.
e.
Create an Lmhosts file that DNS name to IP address .
8. A question with a RAS dial out picture .
Clicked dial out protocols portion .
x.
TCP/IP x. Netbios
x. NwLink
Clicked remote user dial in portion.
x.
Netbios x. NwLink
Clicked
Required
any encryption with clear text
Ask RAS dial in clients run which application. X. NETBIOS
9. Your network has 3 Nt server computers. You
want to be able to monitor disk-space usage on ecah server.
So that you will be
notified when free space on any partition fall below 25%. How to do this ?
a. On each
server, use server manager to add your computer name or user name to the list of names
that
alerts
should be sent to .
b. On each
server, use server manager to start Alert server. Change the startup parameters so
that your
account
name is specified as logon name for the Alerter Service.
X c. On your
comupter, use Performance Monitor to create an alert on the % free space counter for each
server.
d. On one
server, start the schedule server. Use the AT command to start the Dispert utility at
desired
intervals.
10. You want to view counter for TCP/IP activity on 3 Win
NT server comupters. You will run Performance
Monitor on a WinNT workstation
to view this information. What must you do before you can view these
counters.
X a. Install the
SNMPservice on each of the WinNT server computer.
b. Install
the SNMPservice on each of the WinNT workstation.
c. Create a
log file on TCP/IP performance counters.
d. Create a
report on TCP/IP performance counters.
11. A Win NT server computers performs a variety of I/O
transastion. The server has 5 physical disks, each
with 2 partitions. How to
configure the paging file for optimize performance?
a.
Place the paging file on the disk that contain the system file.
b.
Place the paging file on any partition other than the boot partition.
c.
Distribute the paging file equally among all the logical partitions ,except on the
disk that contain the
system
files
X
d. Distribute the paging file equally among all the logical partitions
,except on the disk that contain the
boot
and system files .
12. By using Performance Monitor, you learned taht Win NT is
running slowing because of excessive paging .
How to correct this problem ?
a.
Increase the size of paging file
b.
Decrease teh size of paging file
X c. Add
memory to computer
d.
Install a faster processor .
13. You run Performance Monitor or
WinNT w/s to view memory and disk counters on 10 WinNT server .
You
notice that you w/s performs poorly becaue of the demand of tracking many countors.
Increase the
performance for the task running while collecting this information. How to do ?
X
d. Increase the time interval from data collection .
14. Your network is configured as a single domain and has
five WinNT server. You want to use Performance
Monitor to analyze disk
activity for a week on each server.
a. Create an
alert log b. Use the report view
c. Use the chart view X d.
Create a log file.
15. The paging activity has increase in NT server. As a result ,
the o/system has expanded the paging file
beyond the specified initial paging
size.
How it can affect the operation
system ? choose 2
X a. Application
can take longer to start
b.
Network I/O can be increased.
X c. The disk
containing the paging file can become fragmented.
d. The
current contents of the paging file can be lost .
16. Suspect excessive paging resulting from a lack of
memory . You want to use Performance Monitor to comfirm
your suspicios. Which activity
should you monitor ?
X a. The number of
pages per second on the server.
b. The % of
physical disk activity.
c. The % of
the paging file that is in use .
d. The peak
% of the paging file that is in use .
17. You are configuring a WinNT server that store important data.
Which fault-tolerance method or methods
can you use to recovery of hard
disk failure ? choose all that apply
X a. Disk mirroring
b.
Stripe set
X
c. Stripe set with parity
d. Volume set
18. You want to implement a stripe set with parity on NT
server . What is the minimum of hard disk controller &
physical disk required to
implement a stripe set with parity ?
a. 1 hard disk controller
& 2 physical disks
X
b. 1 hard disk controller & 3 physical disks
c. 2 hard disk
controllers & 2 physical disk
d.
2 hard disks controller & 3 physical disk
19. Your network has 2 Nw 3.x server , 30 Micorsoft Dos comuter
and 20 Microsoft Win3.1 computer. All
client pc use Nw client software. You
wnat to add NT server computer to the network. The client computer
will required access to a Netbios
base client / server application on WinNT server.
Which software is needed ?
a. Client server of
Netware X b.
Nwlink IPX/SPX compatible transports
c. GSNW
d.
RIP for Nwlink
20. What is the minimum requirement for Disk Duplexing ?
a.
1 hard disk controller and 2 physical disks
b.
1 hard disk controller and 3 physical disks
X c. 2 hard disks
controllers and 2 physical disks
d.
2 hard disks controller and 4 physical disks
21. Your network has 1 NT server , 10 Win95 pc, 5 NT workstation
. You want to backup a nightly backup of all
file on the WinNT server
including the registry. You want to do a weekly backup of all w/s data files.
What is the minimum backup
hardware required to perform these backups ?
X a. 1 tape drive
attached to WinNT server computer only .
b. 1 tape
drive attached to WinNT workstation only.
c. 1
tape drive attached to NT server & 1 tape drive atached to Win 95 computer.
d. 1 tape
drive attached to NT w/station and 1 tape drive attached Win95 computer .
22. A question with picture showed 2 scsi hard disks.
Asking if 1 disk failed , how
to configure an ARC path to recovery the failure .
Scsi disk 1
partition 1
DATA FILE , partition 2 DATA FILE
, partition 3 SYSTEM FILE
Scsi disk 2
partition 1
DATA FILE , partition 2 SYSTEM FILE
, partition 3 DATA FILE
X ---> scsi (0) disk (1) rdisk (0) partition (1)
23. Your Win NT server computer is configure to use
Nwlink IPX/SPX Compatible Transports. Your client
computer also use Nwlink
IPX/SPX Compatible Transports .
The client computers are
not able to connect to the server . What is wrong ?
a.
The subnet mask is not set correctly.
b.
File permissions were set to No Access
X c.
Incorrect frame type was selected on teh server
d.
The workstation service on the server failed to start.
I have 4 total mistake out of 55 , so please study the questions +
other braindump
and Find Out the answers for your own .
Until here . Have to submit now , only 2 mins left .
Thank you & good luck .
keith malaysia 14th. NOV. 98
12:10AM