| Test: 070-067 | Date: ... November 1997 |
| Pass Score: 764 | |
| Score: 909 |
| Planning | 100 % |
| Installation & Configuration | 92 % |
| Managing Resources | 90 % |
| Connectivity | 62 % |
| Monitoring & Optimization | 100 % |
| Troubleshooting | 100 % |
Heres a few questions I can remember, wording may be slightly different but the main jist of the question/answer is there. Loads of the questions appear to be from a certain set of exams beginning with 'T' and ending in 'R'
About 6 on Netware type connectivity , 4 on RAS, 2 on Arc naming, 4 on Raid Levels and recovery from disk failures
a) Make netbeui highest binding on all workstations
b) Make Netbeui highest binding on all servers
c) Make TCP/Ip highest binding on workstations
d) Leave as is, NT will sort it out
Single answer
You attach an external tape drive and scsi controller to an NT Server. What do you need to do to make the controller and tape drive work with NT?
a) Install a device driver for the SCSI controller
b) Install a device driver for the tape driver
c) Install the NTBackup software
d) Restart the server
e) Start SCSI controller using SCSI adapters in Control Panel
Select all that apply
You have a PDC called MAIN1. You install a member server with a share on called PAYROLL. The global group ACCTMGRS from the PDC needs access to this share, how do you grant it.
a) Create a Local group called Finance on MAIN1 and put ACCTMGRS into it and grant the Local group change access to the share
b) Create a Local group on member server called FINANCE and add the ACCTMGRS group into it and grant the Finance group change access to the share
c) Creat a Global group on member server called FINANCE and add the ACCTMGRS group into it and grant the Finance group change access to the share
d) Some other combination that was totally wrong.
Single Answer
Print jobs have stopped printing and cannot be deleted, how do you cope with this.
a) Pause the Printer then resume it
b) Stop the spooler and restart it
c) Delete the files from the Spool directory
d) Delete and recreate the printer calling it the same name and the jobs will then print
Single Answer
The main printer on your network is broken. It'll be out of action for some time and there a number of jobs queued up that need to be printed. What do you do?
a) Drag the jobs from the queue onto another printer icon
b) Purge the jobs and notify your users to print to another printer
c) Edit the properties of the printer and add another port pointing to the full UNC of another network printer and the jobs will then go there.
d) Offer to handwrite all the jobs!!!!!
Single answer
What level of Raid can be used on the Boot/System Partition of NTS
a) Volume Set
b) Stripe set without parity
c) Stripe set with Parity
d) Mirror set
Single answer
Two servers , 1 PDC 1 BDC, and a number of workstations. You have 1 DAT drive on the server that backs up both servers and all the workstations. You find the backup is not completing until 10am in the morning which is no good. What can you do to reduce the time?
a) Install a 2nd Dat unit on PDC , use 1st to back up servers and 2nd to back up workstations
b) Install a Dat unit on the BDC, the Dat on the PDC backs up the servers and the DAT on the BDC backs up the Workstations
c) Install a 2nd DAT unit on PDC, 1st backs up w/stations 2nd backups servers
d) Buy a higher capacity drive
Single answer
You have a NT Server and a Novell server. All the clients use Netbeui to connect to the NT Server, how can you enable the clients to connect to the Novell server without having to install additional protocols.
a) Install CSNW on NT Server
b) Install RIP for NWLINK IPX/SPX on NT Sevrer
c) Install GSNW on Novell Server
d) Install GSNW on NT Server
Single Answer
You have installed GSNW on NT Server, what other step is required?
a) Create an Account on NTS Called NTGATEWAY
b) Create an Global Group on NTS Called NTGATEWAY
c) Create A Group on Novell server called NTGATEWAY
d) Create an account on Novell server called NTGATEWAY
Single answer
You want to replicate some files to other servers in your domain, where
do you put the files. There is an exhibit on this question. Basically this
shows
on the export side a path of C:\winnt\system32\repl\export ,
on the import side it shows c:\winnt\system32\repl\import
In the From list a couple of servers and one in the to list.
a) In Any Subdirectoy off of c:\winnt\system32\repl\export
b) In Any Subdirectoy off of c:\winnt\system32\repl\import
c) In the root of c:\winnt\system32\repl\export
d) In the root of c:\winnt\system32\repl\import
Single answer
You have a ras server with 2 Internal Modems. Users complain that they are disconnected immediately on answer. What do you do to find out the problem?
a) Enable Device.log in registry (Yep! It gave you answer to another question, how do you enable device.log!!)
b) Monitor the connections using performance monitor
c) Check in RASADMIN the status of the ports
d) Some other answer
Single Answer
You have 2 disks (Scsi), each with 3 partitions , connected to a single controller(Bios Disabled) and are using Software Raid 1. Your first disk fails, how do you modify your startup boot disk boot.ini to point to the mirror set. See exhibit.
| Disk 0 | SYS | DATA | DATA |
| Disk 1 | DATA | SYS | DATA |
a) SCSI(0) Disk(0) Rdisk(0) Partition(0)
b) SCSI(0) Disk(1) Rdisk(0) Partition(2)
c) SCSI(0) Disk(1) Rdisk(0) Partition(1)
d) SCSI(1) Disk(0) Rdisk(0) Partition(2)
e) SCSI(0) Disk(1) Rdisk(0) Partition(3)
Single Answer
Bob works in the Sales dept and is a member of the SALES group. Bob gets a promotion and is subsequently added to the Managers group. He tried to connect to the DATA share that the managers have access to but he see no files, what else is required before Bob can access the files.
2 Exhibits:
1st shows Bobs group membership, he's in the SALES, MANAGERS and Domain users groups
2nd shows Share permissions and lo and behold MANAGERS has Change access and SALES has NO Acceess
a) Add the everyone group to the share and give Change access
b) Use Server manager and remove Bob from the Sales group
c) Use User Manager for Domains and removed Bob from the Sales group
There were 2 other obscure answers
Single answer
You have 1 Novell server and 50 clients all using the IPX protocol. You install a SQL Server on NT with a new application the clients need to access, what do you need to install on the NT Server to enable the clients to connect
a) RIP for NWLINK IPX/SPX
b) GSNW
c) CSNW
d) NWLINK IPX/SPX Protocol
Single Answer
Four disks in a stripe Set with parity, 1 fails what do you do after you replace the failed drive
a) Reboot server and it will sort itself out
b) Reboot server and run Disk Administrator, highlight unpartitioned space on new drive >= original stripe set partition , select Regenerate option from menu
c) Reboot server and run Disk Administrator and it will automatically detect new drive
Single answer
You have installed Admin Tools on a 95 machine, how do you create shares on a remote NT Server
a) Server Manager
b) Explorer
c) User Manager
d) Disk Administrator
Single Answer
You want to backup the NT Server registry without having to take the server down, how do you do this
a) Network option in Control Panel
b) Disk administrator
c) NTBACKUP
d) Explorer
Single Answer
You have 40 NT Workstations in a Workgroup called SUPPORT. You install a new NT Server as a PDC and want to configure the NT Workstations to take part in the Domain. What 2 Steps do you need to do?
a) Create accounts for the workstations in User Manager For Domains
b) Create accounts for the workstations in Server Manager on the PDC
c) Administrator of workstations logs onto workstations and runs control panel to change to member of domain
d) and e) Also 2 other obscure answers
Only pick 2 answers
2 SCSI disks on 1 controller, you have implemented software RAID 1, your first disk fails, what must you do when you have replaced the faulty disk.
a) Run Disk Administrator and select regenerate mirror
b) Boot the system and it'll fix itself
c) Run Disk Administrator and Break the mirror then recreate the mirror set.
d) Format the drive and reboot
Single Answer
Your NT Server rarely has more than 10 concurrect connections. Which option should you check on the exhibit. The exhibit is the SERVER service options/properties
a) Minimize memory used
b) Balance
c) Throuhgput for Networks Apps
d) Throughput for File sharing
Single answer
Your CD-ROM was not detected when you tried to install NT. What do you do?
a) Edit DEVICE.INF to include your Device
b) Select 'S' from mass storage screen and select other and put your Vendor disk in
c) Boot to DOS and run WINNT /S from the Setup Boot Disk
d) Boot to DOS and run NTDETECT.COM from the CD
Single Answer
Your System partition is currently FAT, you want to convert (Hint!!!) it to NTFS without losing the data
a) Copy the files off to an NTFS partition, format the C: Drive to NTFS then copy the files back
b) Run Disk administrator and select CONVERT from the Tools menu
c) CONVERT c: /fs:ntfs
d) Some other answer
Single Answer
You want to create a startup disk for you Non-Bios enabled NT Server, what other file will be required that you wouldn't need on an IDE system
a) NTFS.SYS
b) NTSCSI.SYS
c) NTBOOTDD.SYS
d) OSLOADER.EXE
Single Answer
You had a virus corrupt your boot sector. You have deleted the boot sector and when you reboot you get Missing Operating System(Why could that Be!). What must you do to resolve this.
a) Boot NT From a startup floppy and run SYS C:
b) Boot NT From a startup floppy and run Disk administrator
c) Boot from Windows NT Setup disks and use ERD to restore boot sector
d) Some other answer
Sngle answer
DHCP Server can allocate an IP Address automatically, what other options can it supply to clients. Select ALL that apply.
a) Wins Server Address
b) DNS Address
c) FTP Address
d) Default Gateway
e) Subnet Mask
You have a single server in a non-routed network, the server is running IP manually configured, other than the IP Address what other parameter must you supply
a) Default Gateway
b) Wins Server Address
c) Subner Mask
d) DHCP Server Address
Single Answer
You have 2 SCSI drives each with a 1GB partition each on its own controller. You want fault tolerance and you want to be able to keep running if 1 drive fails.
a. Volume set
b. Disk duplexing
c. Stripe set withut parity
d. stripe set with parity
Single answer
Your server has four 2GB SCSI drives, you want the server to keep running if 1 drive fails and you want to maximise the amount of disk space available
a) Mirror Set
b) Stripe Set w/out parity
c) Stripe ser with parity
d) Volume set
Single Answer
That's all I can remember for now. 1 Down , 5 to go. IIS next.
Regards
Martyn