Subject: 70-67 bdump; scored 927; date 21/3/98; please name the dump

Dear Robert,

Thanks for everyone who posted here. About 50 qns. on my exam came from them only. Used www.testfree.com and www.ntsyste,s.com (click "NT Certification) and found the ntsystems thing very valuable.

Also see: www.coveware.com

Qns. which i did not find in any bdump which I got:

you are installing from cdrom. what ways can you accomplish this? 5 chpoices. 2 can be eliminated (i.e., Boot from the cdrom; run winnt32.exe from msdos, etc.) i ticked "boot from setup disk" and "boot from msdos. change to the cdrom drive and run win

remember that when installing from network you have to run winnt.exe from the network share, not from boot disk. they tried to confuse you by puytting "create a install startup disk. run winnt.exe from the disk" which is wrong.

arc naming: i got the scsi one.

scsi(0)disk(1)rdisk(0)partition(2)

remember that if scsi is used then rdisk is 0.

what can a dhcp server allocate, apart from ip address? they offered subnet mask ( correct), dns address (correct), wins server address (correct), mail server address (dunno--i didnt checkit), default ftp server address 9dunno--i didnt checkit) (i got onl

ras--highest possible security with client which is using windows 95 and des (3rd party ppp client) -- dunno, i checked "ms encrypted" (i got only 87% only in this section so please check with your instructor) dont check "encrypted authencitcation". it i

how to set up a homedir for user eric?

select whether you use "unc name" or 'specify domain name, server name and directory" in UMD (i said unc name but got only 70% in mgg. resources)

your non-scsi cdrom is not detected by install--specify addl. storage device & insytall driver for cdrom adapter. they tried to confuse you by offering "detect mass storage device" which is wrong. (remember i know this is correct becauze i got 100% in in

after setting up ras with netbeui and tcpip what to do:

--setup how ras will assign ip address.

installing ws's into domain.

only 2 are correct. i.e., create comp a/c's for ws's with svrmgr & ws has to be configured with "network " control panel.

that's all. good luck.

L.M.A.