Questions from the NT Server in the Enterprise Exam 4.0
These are questions a bunch of us saw on the test. As always, know not
only the following questions and the correct answers, but also know why
they are correct and all of the corresponding subjects and issues
related to each question. The transcender for Enterprise really does a
good job of mimicking the actual test questions, so knowing the
transcender inside and out helped a lot. (The Transcender was excellent
- a lot of the questions were right off the test).
DISCLAIMER: these are the questions that we remember. We have recreated
them to the best of our ability, however they are only as accurate as
our memories. Also, the answers are the ones we found to be the best we
could come up with. We found most of the answers in either the Microsoft
Text book or in the transcender. Others we could not find anywhere and
so they are our best guess. If you think the answer we came up with is
wrong and you see a better answer on the test, by all means go with your
own knowledge. Half of us failed on the first try, but after this
study/brain dump session almost all of us passed on the second try. Good
luck.
QUESTIONS:
1.You installed a SCSI controller. You did not log in. The screen died.
What can you do?
A. Last Known Good Configuration.
2. You try to boot NT but can't. How do you restore the boot sector if
it is corrupt?
A. Use 3 boot disks and perform Emergency Repair process.
3. You are using Network Monitor and you want to capture all frames.
What do you do?
A. Set up a capture filter.
4. The amount of time required to access files from a partition has
doubled. What's the best type of object counter in Performance Monitor
to research this problem?
A. Logical Disk object counter.
5. You have a custom application. You want to create a system policy.
How do you create a policy and save it to config.pol?
A. Use a template
6. You need to give all users the ability to add workstations. What do
you do?
A. Give Domain Global Users permissions.
7. You look in event viewer
(shows chart)
2:28 1234 Xxxxxx
2:27 0123 Xxxxxxx
2:26 1023 Xxxxxx
2:25 3512 Xxxxxx
2:25 9171 Xxxxxxx
2:25 7191 Xxxxxxx *
2:21 0121 Xxxxxxx
2.21 2419 Xxxxxxx
What event failure caused the rest to fail?
The answers will look like this:
1234
0111
7191 * this is the answer
0121
* Look for the time stamp, then find the log #.
8. Your print device jams while printing a large job. The application
you are using does not allow you to print the job more than once. You
un-jam the printer. What else can you do to print the document?
A. Restart the job from the document menu on the printer.
9. What is the primary purpose of Windows Internet Naming Service?
A. To resolve NetBIOS names to IP addresses.
10. What types of Operating Systems support file and folder auditing?
A. NT Workstation and NT Server
11. Missing NTOSKRNL.EXE?
A. Use 3 setup disks and restore file. (the boot.ini file is missing or
the path to it is wrong)
12. You need to produce a baseline of processor usage for a server? What
do you do?
A. Monitor and log servers % Processor Time counter during the workday
as well as during off-hours.
13. If you set up 5 virtual servers on one IIS and the IIS server will
contain 5 www folders that will store HTML pages for new URL's. To
implement these sites with the least administrative effort what do you
do?
A. Assign 5 unique IP addresses to the NIC of the IIS server. Then map
IP address to client's www folder.
14. You are trying to print to a HP printer that uses DLC. You cannot
print. Why?
A. Another computer is connected to the printer using DLC's continuous
connection mode.
15. You want to install a BDC without it being connected to the Domain?
A. Stop installation.
16. You think TCP/IP is causing a bottleneck. Which tool do you use?
A. Network Monitor
17. You have two processors in machine. What one object can you use to
display specs on both processors?
A. System object
18. Which file do you use to view a memory dump?
A. Dumpexam.exe
19. Single Master Domain model. You want all users to be able to create
users without having to have the administrator permission?
A. Put the Domain Users Global Group into the Account Operators Local
Group on the Account Domain.
20. You have 6 SCSI drives. The first drive has your system partition.
The other 5 drives are striped. One of your stripped drives crashes. You
replace the drive. What else do you do?
Re-stripe disks and restore from backup tape
(or)
Q - Your system/boot disk crashes.
A - Re-install NT and restore registry from backup.
21. You have a DHCP Server, WINS, and DNS. How do you capture IP address
info?
A. Filter == DHCP
22. You want to give a group of users a new profile. How do you set it
up so no matter what they will get it?
A. Change .dat to .man
23. You created new profiles for users. How do you get users to use it?
A. Put profile in home directory and change path for user in User
Manager, Profiles, Profile Policy Path. Enter UNC name.
24 You have a UPS connected to your NT server. After a power outage you
cannot boot NT and you get a blue screen of death. What do you do to
recover the boot files?
A. Use 3 setup disks and restore files.
25. You have 2 branches with 2 separate domains. You are closing one
branch and want to move one of the BDC's to the other branch. What do
you do?
A. Reinstall
26. You do not want your computer to be used as a browser. What do you
do?
A. In registry set MaintainServerList to no.
27. You want fat read AND write. What fault tolerance method do you use?
A. Striping without parity
28. You have a WINS server on a PDC?
A. Set Maximize for Network Applications.
29. Your users are complaining that logon is slow during the first two
hours of the day. You use Performance Monitor and analyze the
Logons/Sec. Counter. Logons/Sec is HIGH. What do you do?
A. Add more BDC's