Subject: Braindump Microsoft exam 70-068 (SITE 4.0)
Hello Robert,
I've recently done the Microsoft exam 70-068 with great success: 921
points. The braindump pages were a great help for me. Therefore some
contribution from me; some tips and questions I remembered from the
Exam:
Tips for the SITE 4.0 exam (70-068):
1. Read the answers carefully (the question also), I nearly picked a
wrong answer because I read it wrong.
2. If you see any 'required/optional results/proposed solution'
questions: MARK and SKIP THEM! Start with this kind of questions when
you've done all other questions, it will eat a lot of time.
3. Use the 'reversed engineering technique' on the type questions above:
Read the question, then read the solutions and see if any of the
proposed results are met. Then read the solutions again and see if any
of the required results are met. This will save you a lot of time
opposed to the conventional method. (= tip from www.hardcoremcse.com).
4. Make all test-exams, assement tests, PEP-tests, etc. you can find on
the Net. (see the site mentioned above, also the microsoft site,
transcender, www.selftestsoftware.com, etc, etc).
Now for the questions I remembered from the 70-068 exam:
Question 1: You have the following domain configuration in your company:
SALES ---> CORP <-- RESEARCH
(1 PDC, 2 BDC's (1 PDC, 3 BDC's (1 PDC, 1 BDC,
1 member server 2 member servers 200 NT Workst.)
300 NT Workst.) 500 NT Workst.)
Required results:
A group called AllBackup must be created in the CORP domain.
Members of the AllBackup group must be able to backup all domain
controllers in all domains.
Optional results:
Members of the Allbackup group must be able to backup all member
servers in all domains.
Members of the Allbackup group must be able to backup all NT
Workstations in all domains.
Proposed solution:
Make a global group CORP\AllBackup. Make the local groups CORP\CBackup,
RESEARCH\RBackup and SALES\SBackup.
Assign the following special users rights to the local groups: Backup
Files and Restore Files. Put the global group CORP\AllBackup in each
local group.
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional results.
c. The required result only.
d. Does not produce the required result or the optional results.
Question 2: You have the following domain configuration in your company:
SALES ---> CORP <-- RESEARCH
(1 PDC, 2 BDC's (1 PDC, 3 BDC's (1 PDC, 1 BDC,
1 member server 2 member servers 200 NT Workst.)
300 NT Workst.) 500 NT Workst.)
Required results:
A group called AllBackup must be created in the CORP domain.
Members of the AllBackup group must be able to backup all domain
controllers in all domains.
Optional results:
Members of the Allbackup group must be able to backup all member
servers in all domains.
Members of the Allbackup group must be able to backup all NT
Workstations in all domains.
Proposed solution:
Make a global group CORP\AllBackup. Put the global group CORP\AllBackup
in each local 'Backup operators' group in each domain.
Put the global group CORP\AllBackup in the local 'Backup operators'
group on each member server and workstation in all domains.
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional results.
c. The required result only.
d. Does not produce the required result or the optional results.
Question 3: You are the system manager of a company with 3 departments:
Management, Marketing and Accounting.
The departments print all to the same pool of 2 identical printers.
Accounting uses often heavy calculation software which pauses and slows
down the print process.
Your job is to optimize the printing process.
The amount of printerload for each department is shown in the following
table:
Department av. pages printer per day
Management 1-250
Marketing 250-500
Accounting 500+
Required Results:
Print jobs from the Management department must always be printed
first.
Print jobs from the Accounting departments may only print at one print
device.
Optional Results:
Print jobs from the Management and Marketing department must be
processes before any large printjob from the Accounting department.
Prevent the calculations of the accounting department of slowing down
the print process.
Proposed solution:
You are setting up the printer configuration as shown in the table
below:
Management Marketing Accounting
Spooling method spool after first spool after first spool after last
page is printed page is printed page is printed
Priority +15 +10 +1
Rights Everyone: removed Everyone: removed Everyone: removed
Management: Print Marketing: Print Accounting: Print
Print device pool pool one port
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional results.
c. The required result only.
d. Does not produce the required result or the optional results.
Question 4: You are the administor of the following network:
Caracas 56K Chicago 56K Paris
-------- | | | -----------
____________| | |_____
/ | \
T1 / T1 | \T1
Seattle Dallas New York
Required Results:
Network lines may not be saturated with logon validations
Users from caracas and paris domain must access resources on chicago
Users from chicago must access resources on seattle, dallas and new york
Optional Results:
centralized user managment
administrators on the resource domains must be able to manage access to
their own resources
Proposed Solution:
Use the single domain model
Place a PDC and one BDC in chicago
Place a BDC for the chicago domain in each other domain
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional results.
c. The required result only.
d. Does not produce the required result or the optional results.
Question 5: Same situation as in the previous question
Proposed Solution:
Use the master domain model
Place a PDC and one BDC in chicago
Place a BDC for the chicago domain in each other domain
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional results.
c. The required result only.
d. Does not produce the required result or the optional results.
Question 6: You are checking the disk performance of a workstation in
your domain from your PDC.
You see that all disk statistics are at 0 (zero), what is the most
possible cause of this?
a. Workstation service does not run on the workstation
b. Server service does not run on the workstation
c. diskperf -y has not beennot started on the workstation
d. diskmanager has not been not started on the workstation
Question 7: You two domains, WEST and CORP. WEST trust CORP.
Somebody logs in from a workstation in the WEST domain onto the CORP
domain
Which resources can be accessed?
a. all resources which are given rights to the corp\Domain users group
b. all resources which are given rights to the corp\Domain guests group
c. all resources which are given rights to the west\Domain users group
d. all resources which are given rights to the west\Domain guests group
Question 8: You have the following domain configuration:
Management <----- Research
(User: Maria) (Share: Prodinfo)
(Global group:sales (Local group: SalesUsers
Member: Maria) Member: Managment\Sales
(Global group:Marketing (Global group: MarkUsers
Member: Maria) Member: Management\Marketing)
The following rights have been applied on the groups in the Research
domain:
Share security on Prodinfo:
SalesUsers: change
MarkUsers: no access
Maria has advanced in her job and has become a Sales manager. Because of
her new job she need to change files in the Research\Prodinfo share. In
which way can this be accomplished.
a. Add Maria to the Local SalesUsers group
b. Remove Maria from the Managment\Sales group
c. Remove Maria from the Management\marketings group
d. Make a full trust between the domains
Question 9: You have a PDC which does run WINS and it's only function is
account validation.
How can you optimize the performance of this domain controller using the
server program in ontrol panel:
a. Minimize memory
b. Balance
c. Optimize for file sharing
d. Optimize for network applications
Question 10: You have a Windows NT server with six scsi disks. On one
disk is the system partition, the other five are in a stripset with
parity. 1 disk fails, you replaced the disk. What must be done next in
the disk administrator?
a. Choose extend volume set in the partition menu
b. Choose regenerate in the fault tolerance menu
c. Choose make stripe set with parity and restore from backup
d. Do nothing, the disk wil be regenerated when NT boots
Question 11: You have a Windows NT server with six scsi disks. On one
disk is the system partition, the other five are in a stripset with
parity. 2 disks failed, you replaced the disks. What must be done next
in the disk administrator?
a. Choose extend volume set in the partition menu
b. Choose regenerate in the fault tolerance menu
c. Choose make stripe set with parity and restore from backup
d. Do nothing, the disk wil be regenerated when NT boots
Question 12: You have the jobs to make new custom fault tolerance
standard for your company. The company now uses disk duplexing as the
current standard.
Required results:
Data integrity must be maintained when 1 disks fails.
Optional results:
The fault tolerance methode must not use additional processor time.
The read access time must be improved.
Proposed Solution:
Introduce a stripeset with parity as the new company standard
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional results.
c. The required result only.
d. Does not produce the required result or the optional results.
Question 13: You have the jobs to make new custom fault tolerance
standard for your company. The company now uses disk duplexing as the
current standard.
Required results:
Data integrity must be maintained when 1 disks fails.
Optional results:
The fault tolerance methode must not use additional processor time.
The read access time must be improved.
Proposed Solution:
Introduce a stripeset as the new company standard
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional results.
c. The required result only.
d. Does not produce the required result or the optional results.
Question 14: You are using network monitor from the Windows NT server
4.0 standard installation. You have just captured 400 frames from your
NT server. How can you display data originating from one specific
computer to your server.
a. use the address database
b. use capture filter by protocol
c. use capture filter by address
d. use sort by address in capture window
Question 15: You have 3 domains: ACCT, SALES and RESEARCH. You have to
manage the trusts between these domains. The requirements are the
following:
users on the ACCT domain needs access to resources on the ACCT domain
users on the ACCT domani needs access to resources on the SALES and
RESEARCH domain
users on the SALES and RESEARCH domain need access to eachothers
resources
What is the most efficient way to make the trust relationships:
a. let ACCT trust SALES and RESEARCH, make a full trust between SALES
and RESEARCH
b. let SALES and RESEARCH trust ACCT, make a full trust between SALES
and RESEARCH
c. let ACCT be on it's own, make a full trust between the SALES and
RESEARCH domain
d. implement a full trust
Question 16: Your company uses the single domain model. Brokers with NT
workstation 4.0 notebooks need to have access to the domain from remote
locations. Your job is to implement the highest level of security on the
domain.
Required results:
Brokers need access to the domain. Only the brokers may log in and no
other users.
Optional results:
Passwords are transmitted encrypted over the line. All data must be
transmitted encrypted.
Proposed solution:
Use a password length with a minimum of 8 characters. Let the system
remember the last 10 used passwords. Force the brokers to change their
password every month. Install a RAS server and configure it with the RAS
manager so that only the brokers have permission to log in. Use the
Microsoft authentication method.
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional results.
c. The required result only.
d. Does not produce the required result or the optional results.
Question 17: Your company uses the single domain model. Brokers with NT
workstation 4.0 notebooks need to have access to the domain from remote
locations. Your job is to implement the highest level of security on the
domain.
Required results:
Brokers need access to the domain. Only the brokers may log in and no
other users.
Optional results:
Passwords are transmitted encrypted over the line. All data must be
transmitted encrypted.
Proposed solution:
Use a password length with a minimum of 8 characters. Let the system
remember the last 10 used passwords. Force the brokers to change their
password every month. Install a RAS server and configure it with the RAS
manager so that only the brokers have permission to log in. Use any
authentication method. Use a hardware security host between the RAS
modem and the RAS server.
What does the proposed solution produce?
a. The required result and the optional results.
b. The required result and one of the optional results.
c. The required result only.
d. Does not produce the required result or the optional results.
Question 18: Mary is member of three groups: sales, marketing,
manufacturing. The rights a directory calles PRODUCTS are shown below:
Directory rights on PRODUCTS:
SALES Read
Marketing Change
Manufacturing No access
Test group Read
Everyone Change
What are Mary's effective rights in the PRODUCTS directory?
a. Read
b. Change
c. No Access
d. Full control
Question 19: You've given permission to other administrators to
administer the directory service on you domain. How can you keep track
of the changes being made? Choose from the graphic shown below (Audit
dialog shown):
a. Audit object access
b. Audit use of user rights
c. Audit User/Group management
d. Audit file read access
Question 20: You have 2 domains: SALES and MARKETING. There is no
interconnection between the domains. At the SALES domain, must install a
windows NT server as a BDC which will be used later in the marketing
domain. How should you proceed?
a. install it as a member server using a workgroup, then move it to the
MARKETING domain and promote it to a BDC.
b. installing as a PDC with the domain name MARKETING, then move it
physically to the MARKETING domain.
c. install it as a BDC in the SALES domain, then move it physically to
the MARKETING domain and change the domain name.
d. do not proceed, move the server physically to the MARKETING domain
and install it there as a BDC.
Question 21: You have a single domain with 1 PDC and 10 BDC's. Users are
reporting slow logon on the PDC. You check with the performance monitor
the server process and see that the average logon/sec is 5 or higher.
what should you do to increase logon performance?
a. add more memory to the PDC
b. increase the replication pulse maximum register value
c. decrease the replicationgovernor register value
d. add more BDC's
Question 22: You are using the migration tool to transfer user accounts
to a NT server. What is a requirement in order to do this.
a. the NETBEUI protocol must be installed on both the NT server and the
Netware server
b. the Microsoft TCP/IP must be installed protocol on both the NT server
and the Netware server
c. a windows NT server with a FAT partition
d. a windows NT server with a NTFS partition
Question 23: You have 3 NT servers and 3 Netware servers. You're in the
process of migrating all users and data from the netware servers to the
NT servers. However you don't want existing user or group accounts on
the NT domain to be overwritten. What is the most efficient way to
accomplish this task?
a. start the migration with the default options
b. do the migration for each user separately by hand.
c. do the migration, then delete the duplicate account with the user
manager
d. use a mapping file and enter the user, groups and password manually.